• 전력전자학회논문지
• /
• 제17권1호
• /
• pp.67-76
• /
• 2012

This paper proposes the aggregated modeling and control of integated boost-flyback converter (IBFC) for understanding of dynamics characteristic and designing of relevant controller. The basic concept of the aggregated modeling is to substitute the boost or the flyback converter with an equivalent current source. Since each converter with equivalent current source corresponds to the basic boost and flyback converters, the overall mathematical process is significantly simplified for the modeling. Afterwards each result is combined to construct the complete model of the IBFC, and the relevant controller is designed through the achieved small-signal model. Simulation and experimental results show excellent agreement with the theoretical expectations.

• 한국융합학회논문지
• /
• 제12권10호
• /
• pp.249-254
• /
• 2021

본 논문은 주얼리 디자인 전공자에게 요구되는 기본소양인 기초조형의 공간지각 능력과 주얼리 디자인에 있어 가장 중요한 투시도법을 함께 활용하여 조형능력을 창의적으로 발휘 할 수 있는 수업 모형에 대해 연구한 논문이다. 이를 위해 연구자는 학생들에게 공간감을 나타낼 수 있는 방법에 대해 이론적으로 설명하고 기본도형과 입체도형, 투시도법에 대한 실기 수업을 진행한 후 창의적 활동을 위한 주제를 제시하고 결과물을 얻었다. 기존의 기초조형 수업에서 단순히 실기위주의 수업만 진행했다면 본 연구를 통해 학생들에게 안에서 창의력을 발휘하기 위한 분석과 기초투시도법, 공간감을 함께 융합적으로 활용할 수 있는 수업모형을 제시함으로 집중교육효과와 명확한 평가기준을 통해 학생과 교수 모두가 공감할 수 있는 평가방법을 알 수 있는 계기가 되었다. 본 논문을 계기로 더 다양한 재료와 융합적 수업모형에 대한 연구가 계속되기를 바란다.

• Bulletin of the Korean Chemical Society
• /
• 제29권9호
• /
• pp.1797-1799
• /
• 2008

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.3-8
• /
• 2001

Regarding current rapid innovations and applications of information and telecommunication technologies as well as economical requirements, modeling and simulation (M&S) plays an increasingly important role for the planning, development and operation of high-tech products and systems. M&S has to seen as a key technology for multi-facetted analysis of complex systems during their life-cycles. For reasons as accuracy, credibility and cost-effectiveness, the selection of adequate and effective M&S techniques and tools is of significant importance. Regarding these aspects, this paper summarizes the basic methodological modeling approach for effective product and system modeling. In addition, besides a classification of different basic architectures and taxonomies combining knowledge-processing and simulation techniques, the paper describes some practical implementations and experiences.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.349-350
• /
• 2023

In the field of domestic construction, 3D modeling mainly targets outdoor construction sites, and acquires outdoor spatial information by operating UAVs and UGVs equipped with cameras. 3D modeling of construction sites tends to expand its scope to indoors along with the increasing demand for site monitoring and management through indoor spatial information. In the case of indoors, it is impossible to shoot with a drone after the framework and outer walls of the building are completed, so it is necessary to collect indoor spatial information and 3D modeling using a 360 camera. The purpose of this study is limited to basic research to establish a process that can obtain simple and high-quality indoor 3D modeling results using indoor data collected from 360 cameras.

• 한국생물물리학회:학술대회논문집
• /
• 한국생물물리학회 1998년도 학술발표회
• /
• pp.21-21
• /
• 1998

Since the repair efficiency of non-Watson-Crick base pairs in DNA is affected by the mismatched base-pairs and their neighbor sequences, the structural studies are necessary for the elucidation of the repair efficiency. NMR and molecular modeling studies on the DNA duplexes including AA mismatches were performed.(omitted)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.404-405
• /
• 2011

In this paper, we present basic modeling of Juju power system using PSCAD/EMTDC. In detail, models of bipolar HVDC system, power transmission line, basic thermal power plant, load, and wind farm have been developed for Jeju power system. For evaluating basic dynamic behavior, we tested the system with a simple scenario and the test result showed acceptable response.

• 대한조선학회논문집
• /
• 제48권3호
• /
• pp.215-221
• /
• 2011

To improve the naval ship acquisition process, systems engineering, modeling and simulation, etc. have been introduced, and there has been ongoing research on acquisition systems for effective support of it. However, due to characteristics of the naval ship acquisition process, development process mainly carried out at a shipyard such as basic design, detailed design, construction and test is difficult to integrate with the acquisition systems of IPT(Integrated Project Team). In addition, research aimed to improve this is rather lacking. In this paper, the naval ship product structure concept proposed in previous research was applied to the basic design system at shipyard, and basic research for expanding the coverage of naval ship acquisition systems to the basic design phase is performed. A data structure of modeling system appropriate to the basic design phase was proposed through research findings and the prototype system based on it was implemented.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제37권4호
• /
• pp.615-633
• /
• 2023

본 연구는 수학 교과에서 기초학력 및 학습부진에 관련한 연구가 나아갈 방향을 제안하고자 2023년 8월까지의 국내 연구 동향을 분석하였다. 이를 위해 국내 연구 197편의 국문 초록을 자료로 수집하여 빈도 분석 및 LDA 기반 토픽모델링을 실시하였다. 연구결과, 첫째, TF 및 TF-IDF 기준으로 '학업성취', '영향', '효과', '변인'은 모두 상위권에 위치하였다. 둘째, LDA 기반 토픽모델링을 실시한 결과, 기초학력 미달 발생 원인, 수학 학습부진학생의 학습 실태, 수학 학습부진학생 지도 교사의 전문성, 수학 학습부진학생 지원 프로그램, 국가수준 학업성취도 평가 결과로 5개 토픽이 도출되었다. 이러한 결과를 바탕으로 향후 수학 교과의 기초학력 및 학습부진에 관한 연구가 나아가야 할 방향으로 학습부진학생의 성장에 초점을 둔 연구, 수학 교과에서 학습지원을 필요로 하는 학생에게 제공하는 프로그램을 체계화하는 연구, 수학 교과에서 학습지원대상학생을 지도하기 위한 교사의 전문성 신장에 관한 연구 등을 제안하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권5호
• /
• pp.2186-2203
• /
• 2020

Security administrators of companies and organizations need to come up with proper countermeasures against cyber-attacks considering infrastructures and security policies in their possession. In order to develop and verify such countermeasures, the administrators should be able to reenact both cyber-attacks and defenses. Simulations can be useful for the reenactment by overcoming its limitations including high risk and cost. If the administrators are able to design various scenarios of cyber-attacks and to develop simulation models from their viewpoints, they can simulate desired situations and observe the results more easily. It is challenging to simulate cyber-security issues, because there is lack of theoretical basis for modeling a wide range of the security field as well as pre-defined basic components used to model cyber-attacks. In this paper, we propose a modeling method for cyber-security simulations by developing a basic component and a composite model, called Abstracted Cyber-Security Unit Model (ACSUM) and Abstracted Cyber-security SIMulation model (ACSIM), respectively. The proposed models are based on DEVS(Discrete Event systems Specification) formalism, a modeling theory for discrete event simulations. We develop attack scenarios by sequencing attack behaviors using ACSUMs and then model ACSIMs by combining and abstracting the ACSUMs from a security perspective. The concepts of ACSUM and ACSIM enable the security administrators to simulate numerous cyber-security issues from their viewpoints. As a case study, we model a worm scenario using ACSUM and simulate three types of simulation models based on ACSIM from a different security perspective.