DOI QR코드

DOI QR Code

높은 승압비를 갖는 부스트-플라이백 컨버터의 개선된 모델링 방법

Improved Modeling and Control of Boost-Flyback Converter With High Step-Up Voltage Ratio

  • 투고 : 2011.09.06
  • 심사 : 2011.12.15
  • 발행 : 2012.02.20

초록

This paper proposes the aggregated modeling and control of integated boost-flyback converter (IBFC) for understanding of dynamics characteristic and designing of relevant controller. The basic concept of the aggregated modeling is to substitute the boost or the flyback converter with an equivalent current source. Since each converter with equivalent current source corresponds to the basic boost and flyback converters, the overall mathematical process is significantly simplified for the modeling. Afterwards each result is combined to construct the complete model of the IBFC, and the relevant controller is designed through the achieved small-signal model. Simulation and experimental results show excellent agreement with the theoretical expectations.

키워드

참고문헌

  1. 김만고, "능동 클램프 풀브릿지 부스트 컨버터에 대한 모델링 및 분석", 전력전자학회 논문지, 제 10권 제 2호, pp.169-176, 2005. 4.
  2. 이준영, 문건우, 김현수, 윤명중, "부스트-플라이백 결합형 ZCS Quasi-Resonant 역률개선 컨버터", 전력전자학회 논문지, 제 4권 제 1호, pp.91-98, 1999. 2.
  3. Yim-Shu Lee and Bo-Tao Lin, "Adding active clamping and soft switching to boost-flyback single-state isolated power-factor-corrected power supplies," in IEEE Trans.on vol. 12, no. 6, 1997, pp. 1017-1027.
  4. Liang, T.J and Tseng, K.C, "Novel high-efficiency step-up converter," IEE proceeding in Electric Power Application, vol.151, no.2, 2004, pp. 182-190 https://doi.org/10.1049/ip-epa:20040022
  5. Spiazzi, G., Mattavelli, P., Gazoli, J.R., Magalhaes, R. and Frattini, G, " Improved Integrated Boost - Flyback High Step-up Converter," in IEEE2010 Industrial Technology, 2010, pp.1169-1174.
  6. R. Watsonetal., "Utilization of an active-clamp circuit to achieve soft switching in flyback converters," inProc. IEEE PESC'94 Rec., pp.909-916.
  7. D. Czarkowski and M. K. Kazimierczuk, "Energy-conversion approach to modeling PWM dc-dc converters", IEEE Trans. Aerosp Electron. Syst., vol. 29, pp. 1059-1063, July 1993. https://doi.org/10.1109/7.220955
  8. M. K. Kazimierczuk and D. Czarkowski, "Application of the principle of energy conservation modeling the PWM converters," in Proc. 2nd IEEE Conf. Control Applications, vol.1, Vancouver, Canada, Sept.13-16, 1993, pp.291-296.
  9. S. Cuk and R. D. Middelbrook, "A general unified approach to modeling switching dc-to-dc converters in discontinuous conduction mode," in Proc. IEEE Power Electronics Specialists Conf. PESC'77, 1977, pp.36-57.
  10. Rae-Young Kim and Jih-sheng Lai, "Aggregated modeling and control of a boost-buck cascade converter for maximum power point tracking of a thermoelectric generator," in IEEE 2008 Applied Power Electronics Conference, 2008, pp. 1754-1760.
  11. D. Maximovic and S. Cuk, "A unified analysis of PWM converter in discontinous modes," IEEE Trans. Power Electron., vol.6,pp.476-490,July1991. https://doi.org/10.1109/63.85890
  12. J. Sun, D. M. Mitchell, M. F. Greuel, P. T. Kreain, and R. M. Bass, "Averaging models of PWM converter operating in discontinous mode," IEEETrans.PowerElectron.,vol.16,pp.482-491,July2001.
  13. Liang, T.J and Tseng, K.C, "Analysis of integrated boost-flyback step-up converter," IEEE proceeding in Electric Power Application, 2005, pp. 217-225. https://doi.org/10.1049/ip-epa:20045003
  14. W.Erickson and D.Maksimovic, "Fundamentals of Power Electronics," second edtion, Springer Science,

피인용 문헌

  1. Controller Design of Buck-Boost Converter with Constant Voltage Output vol.29, pp.9, 2015, https://doi.org/10.5207/JIEIE.2015.29.9.042