• ETRI Journal
• /
• v.19 no.3
• /
• pp.116-140
• /
• 1997

The base station transceiver subsystem (BTS) of the CDMA Mobile System is interfaced to mobile stations over the air and to the wired network through a packet switched interconnection network. The potential benefits of CDMA technology are achieved when the transmitter and the receiver are properly designed and implemented. The physical layer of the interface at the base station is implemented with the CDMA ASICs and control circuits in channel card of the BTS. We present the design perspectives and structural illustration of the BTS. Base station modem ASICs and their control to implement the CDMA receiver, Baseband and RF signal processing blocks, and BTS controller are described. Elaborate power control is essential to ensure the high capacity which is one of advantages of the CDMA technology. The closed loop reverse link power control and the forward link power control operated in the BTS are described.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.61-64
• /
• 2000

In this paper, we design up-down converter for asynchronous IMT-2000 base station using W-CDMA(Wideband Code Division Multiple Access) technology. This up-down converter(UDC) has AGC (Automatic Gain Control), TPTL(Transmitting Power Tracing Loop), RSSI(Received Signal Strength Indicator) function. And for the cell control of BS(Base Station), breathing, blossoming, wilting function also available. This UDC has diversity structure for better performance.

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.223-232
• /
• 2019

With the development of the information communication industry, the size of the communication device has been reduced to a system that generates a large amount of heat. Therefore, since the amount of heat generated by the wireless equipment is large in the wireless base station, the energy consumption is continuously consumed and the failure of the wireless base station may occur. Therefore, in this study, The study was analyzed. As a research method, we performed base station with a lot of calorific value and electric charge. We selected 25 base stations and obtained data for two weeks. To ensure reliability, the room temperature was kept constant at $27^{\circ}C$, and the control system was installed and equiped for two weeks to obtain the date analysis. In order to calculate the test results in the study method, the instrument was used with a computer, a digital thermometer, and dust measurement. For the date analysis, we conducted a research study on 25 wireless basestations before and after the installation of Control Sysetm.

• The Journal of the Korea Contents Association
• /
• v.2 no.1
• /
• pp.104-112
• /
• 2002

Dynamic Handoff Control Scheme (DHCS), which is propose d in this paper, suggests the method to request handoff at the optimal time. To accomplish this, DHCS measures the speed of the mobile station and sets the pilot strength for handoff request. When the pilot strength of the current base station is bigg or than the pilot strength for handoff request, which means the pilot strength of the current base station is big enough so the possibility of the call to be disconnected is low, DHCS doesn't request for the handoff even though the pilot strength of the adjacent base station is bigger than the pilot strength of the curent base station. DHCS guarantees the QoS (Quality of Service) by processing the handoff calls prior to new calls at the base station and providing continuous service for the mobile station by setting the priorities for the calls according to the queue waiting time transmitted from the mobile stations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.353-364
• /
• 2002

To prevent the performance degradation of TCP due to packet loss in the smooth handoff by the route optimization extension of Mobile If protocol, a buffering of packets at a base station is needed. A buffering of packets at a base station recovers the packets dropped during the handoff by forwarding the buffered packets at the old base station to the mobile user. But, when the mobile user moves to a new foreign network which is connected to a congested router, the buffered packets forwarded by the old base station are dropped and the link utilization performance degraded due to increased congestion by the forwarded packets. In this paper, when the mobile user moves to a new foreign network which is connected to a congested router, Ive propose a packet forwarding control scheme required far the old base station to improve TCP performance in mobile networks. The old base station forwards or discards the buffered packets during handoff by proposed packet forwarding control scheme based on congestion states of RED(Random Early Detection) at the congested router. Simulation results slow that link utilization performance can be improved by applying proposed packet forwarding control scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.471-482
• /
• 1996

In this paper, we analyze the effect of imperfect power control on the capacity of the reverse channel in CDMA cellular system with antenna arrays in the base station. For imperfect power control, we assume that the received power at the base station from the users within each cell has log-normal distribution, and we also consider the effect of imperfect power control of co-channel interferences which arise from both its own cell and outer cells. From the result of numerical analysis, we show that the degree of power control gives a great influence on the capacity of CDMA celluar system with antenna arrays, and also that antenna arrays at the base station can improve greatly the system capacity even when the power control is imperfect.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.10
• /
• pp.1-8
• /
• 1997

In this paper, we propose a call admission control scheme which can be used in real environment for the traffic cibtrik if a base station if DS-CDNA cellular systems. The proposed scheme estimates the mean and variance of other cell interference by using the values used for the closed loop power control. The reerse link capacity of the base station can be calculated by using the estimated mean and variance of other cell interference. The base station admits a call only if the number of users is less than the calculated reverse link capacity. In addition, we propose a simple method to obtain the equivalent number of voice call users per one data call user in multi-rate traffic environment. The method can be applied to call admission control in multi-rate traffic environment.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8S
• /
• pp.2748-2756
• /
• 2000

IMT-2000 시스템(International Mobile Telecommunications-2000 system)은 음성, 화상, 및 데이터 서비스등 멀티미디어 서비스 제공을 목표로 기존의 디지털 이동통신 시스템에 적용된 기본 기술에 새로운 시스템 개념과 각종 응용기술 및 망 기술이 접목된 차세대 이동통신 시스템이다. 본 논문에서는 동기방식의 IMT-2000 시스템의 핵심 시스템인 제어국(BSC : Base Station Controller)의 무선 트래픽 및 신호접속기능, 이동호 제어기능 및 운용보전기능의 설계 및 구현에 대하여 논하고자 한다. 또한, IMT-2000 시스템의 호처리 절차 및 핸드오프 처리절차를 제시한다. 주로 BSC의 서브시스템인 AIS(ATM Interconnection Subsystem), BIS(BTS Interface Subsystem), SDS(Selector Distribution Subsystem), CSS(Control & Signal Subsystem) 및 BEMS(Base station Element Management Subsystem)의 구조와 기능, 그리고 MS(Mobile Station),BTS(Base Station Transceiver Subsystem), BSC 및 MSC(Mobile Switching Center)간의 호처리 기능, 절차(핸드오프 기능 포함)를 설계, 구현하였다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.4
• /
• pp.87-94
• /
• 2016

This paper proposes an energy transmission method to maximize energy efficiency of a based station. This method makes use of classification of service type to solve an inefficient use of transmission power, which is from exponential relationship between the legacy data throughput and transmission power. The proposed one is a way to find the most energy-efficiency points with the transmitted optimal amount of data on users in a base station of wireless network environment. For this, we propose EETA (Energy-Efficient Transmission Algorithm) which can control the amount of data and the holding time at the base station. As a result, the proposed method can improve the energy efficiency of about 10% compared to the legacy base station.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.181-184
• /
• 2007

In this paper, a CSSMA/AI MAC protocol in packet CDMA network is presented. The main features of this protocol are the code status sensing and reservation for reducing the packet collision. The base station broadcasts the code status on a frame-by-frame basis just before the beginning of each preamble transmission, and the mobile station transmits a preamble for reserving a code based on the received code status. After having transmitted the preamble, the mobile station listens to the downlink of the selected code and waits the base station reply. If this reply indicates that the code has been correctly acquired, it continues the packet transmission for the rest of the frame. If there are other packets waiting for transmission, the base station broadcasts the status of the code as reserved, and the mobile station transmits a packet on a reserved code for the successive frames.