• Fire Science and Engineering
• /
• v.32 no.1
• /
• pp.66-75
• /
• 2018

A barrier installed within a rack plays a significant role in delaying the initial spread of fire but it can be an obstacle to a ceiling-type sprinkler installed for extinguishing fires and for supplying fire extinguishing water. An in-rack sprinkler and a barrier can be applied at the same time, but a study on a barrier's ability to delay fire spread or its effect on the in-rack sprinkler is needed. Accordingly, this study examined the effect of a barrier on the delay of fire spread and the in-rack sprinkler according to installation conditions through the reduced scale fire test. As a result, the delay in fire spread increased more than four times when a horizontal barrier and a vertical barrier were installed at the same time. The temperature was also increased two to three times with the compartment, resulting in the early operation of the in-rack sprinkler.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.209.2-209.2
• /
• 2015

Two dimensional layered materials, such as transition metal dichalcogenides (TMDs) family have been attracted significant attention due to novel physical and chemical properties. Among them, molybdenum disulfide ($MoS_2$) has novel physical phenomena such as absence of dangling bonds, lack of inversion symmetry, valley degrees of freedom. Previous studies have shown that the interface of metal/$MoS_2$ contacts significantly affects device performance due to presence of a scalable Schottky barrier height at their interface, resulting voltage drops and restricting carrier injection. In this study, we report a new device structure by using few-layer graphene as the bottom interconnections, in order to offer Schottky barrier free contact to bi-layer $MoS_2$. The fabrication of process start with mechanically exfoliates bulk graphite that served as the source/drain electrodes. The semiconducting $MoS_2$ flake was deposited onto a $SiO_2$ (280 nm-thick)/Si substrate in which graphene electrodes were pre-deposited. To evaluate the barrier height of contact, we employed thermionic-emission theory to describe our experimental findings. We demonstrate that, the Schottky barrier height dramatically decreases from 300 to 0 meV as function of gate voltages, and further becomes negative values. Our findings suggested that, few-layer graphene could be able to realize ohmic contact and to provide new opportunities in ohmic formations.

• Journal of Powder Materials
• /
• v.24 no.3
• /
• pp.248-253
• /
• 2017

In this study, we investigate the effect of the diffusion barrier and substrate temperature on the length of carbon nanotubes. For synthesizing vertically aligned carbon nanotubes, thermal chemical vapor deposition is used and a substrate with a catalytic layer and a buffer layer is prepared using an e-beam evaporator. The length of the carbon nanotubes synthesized on the catalytic layer/diffusion barrier on the silicon substrate is longer than that without a diffusion barrier because the diffusion barrier prevents generation of silicon carbide from the diffusion of carbon atoms into the silicon substrate. The deposition temperature of the catalyst and alumina are varied from room temperature to $150^{\circ}C$, $200^{\circ}C$, and $250^{\circ}C$. On increasing the substrate temperature on depositing the buffer layer on the silicon substrate, shorter carbon nanotubes are obtained owing to the increased bonding force between the buffer layer and silicon substrate. The reason why different lengths of carbon nanotubes are obtained is that the higher bonding force between the buffer layer and the substrate layer prevents uniformity of catalytic islands for synthesizing carbon nanotubes.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.2
• /
• pp.69-76
• /
• 2005

Interface-trap density, lifetime and Schottky barrier height of erbium-silicided Schottky diode are evaluated using equivalent circuit method. The extracted interface trap density, lifetime and Schottky barrier height for hole are determined as $1.5{\times}10^{13} traps/cm^2$, 3.75 ms and 0.76 eV, respectively. The interface traps are efficiently cured by $N_2$ annealing. Based on the diode characteristics, various sizes of erbium- silicided/platinum-silicided n/p-type Schottky barrier metal-oxide-semiconductor field effect transistors (SB-MOSFETs) are manufactured from 20 m to 35nm. The manufactured SB-MOSFETs show excellent drain induced barrier lowering (DIBL) characteristics due to the existence of Schottky barrier between source and channel. DIBL and subthreshold swing characteristics are compatible with the ultimate scaling limit of double gate MOSFETs which shows the possible application of SB-MOSFETs in nanoscale regime.

• The Journal of Pediatrics of Korean Medicine
• /
• v.37 no.4
• /
• pp.25-33
• /
• 2023

Objective This study aimed to confirm the effect of Sabaek-san extract on the recovery of skin damage in atopic dermatitis-induced mice. Methods In this study, we used 4-week-old NC/Nga mice that were assigned to four groups: control (Ctrl), lipid barrier elimination (LBEG), dexamethasone (Dx) administration after lipid barrier elimination (DxAG), and Sabaek-san extract administration after lipid barrier elimination (SBAG). Ten rats were assigned to each treatment group. After drug administration for 3 days following lipid barrier elimination, ceramide kinase, caspase 14, sodium hydrogen antiporter (NHE), cathelicidin, claudin, and Toll-like receptor (TLR2) were observed to confirm restoration of skin moisturizer production, antimicrobial barriers, and tight junctions in the skin barrier. Results Ceramide kinase and caspase 14 positive reactions were significantly higher in the SBAG group than in the LBEG or DxAG groups. NHE and cathelicidin showed a higher positive reaction in the SBAG group than in the LBEG and DxAG groups. Claudins and TLR2 showed a higher positive reaction in the SBAG group than in the LBEG or DxAG groups. Conclusion It was confirmed that Sabaek-san extract may have the potential to restore damaged skin barrier in atopic dermatitis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.177-179
• /
• 2000

Barrier rib for the plasma display panel (PDP) was made by photolithographic process utilizing photosensitive barrier rib paste. The barrier rib paste was prepared by first dissolving poly(MMA-co-MAA) binder polymer in butyl carbitol(BC) solvent at 15 wt% concentration. To this solution were added a mixture of functional monomers , Irgacure 651 photoinitiator, and barrier rib power and then the whole mixture was dispersed in the three roll mill for 2 hour. The effect of component and concentration of photosensitive barrier rib paste was studied. After optimization of the paste formulation and photolithographic process, barrier rib could be obtained with good resolution up to 110-120 ${\mu}m$ height and 80-90 ${\mu}m$ width.

• The Journal of Information Systems
• /
• v.23 no.3
• /
• pp.25-46
• /
• 2014

As the use of smartphone has rapidly spread into the current society, the mobile instant messenger applications such as Kakaotalk, Tiktok, and Line have become an indispensable part of our daily lives. While, the mobile instant messenger has brought us many positive changes, social problems stemming from the dependency on the mobile instant messenger has been occurred. The dependency of the mobile instant messenger can negatively affect daily lives and lead to stress or addiction. Therefore, it is very important to examine how we can prevent such dependency and addiction. In this respect, the purpose of this study is to investigate determinants impacting on the mobile instant messenger dependency, barrier of living, and intention to digital break. The statistical analysis of survey results shows that enjoyment, identity, relationship commitment, critical mass and ease of use are significantly related to mobile instant messenger dependency, while media richness is not significantly related. Mobile instant messenger dependency have a positive effect on barrier of living, which then has a positive effect on digital break. Lastly, the moderating effect of perceived risk is significant. This research suggests theoretical and business implications to prevent mobile instant messenger dependency.

• Membrane Journal
• /
• v.25 no.2
• /
• pp.85-98
• /
• 2015

A global trend of replacing metal or glass containers with polymer-based packaging materials has been prevalent in the food packaging industry due to their ease in processibility, excellent transparency, and good cost efficiency. Barrier polymers tend to show low permeabilities for atmospheric gases such as oxygen, carbon dioxide, and water vapor, which allow them to be utilized in the food and beverage packaging industry. With the current global trend, expansion of polymeric packaging materials to new markets such as oxygen sensitive juices, flavored water, and energy drinks requires improved $CO_2$ and $O_2$ barrier properties. The improvement of the existing polymer-based barrier platform will enable a rapid market impact. In this paper, the current barrier technologies such as (1) antiplasticization-induced barrier materials, (2) synergistic effect of antiplasticization and crystallization, (3) new barrier polymers, (4) nanocomposite materials, and (5) polymer blending are introduced with their characterization techniques for the development of advanced packaging materials.

• Journal of the Korean Ceramic Society
• /
• v.24 no.1
• /
• pp.63-69
• /
• 1987

Effect of MoO3 additiion on the semiconductive BaTiO3 ceramics doped with 0.2 mole% Nb2O5 and their frequency characteristics have been investigated on the view of intergranular barrier layer model through the observation of changes in their electrical properties. The resistivity increases with the increase of MoO3 addition, but the capacitance, the frequency dependence of capacitance and the effect of positive temperature coefficient of resistivity (PTCR) decrease. It is explained by the possible increase in the thickness of potential barrier due to the formation of insulating layer and thus decrease in the degree of energy band bending. Both the PTCR effect and resistivity decrease with the increase of frequency due to the possible elimination of barrier layer at the grain boundary.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.4 no.1
• /
• pp.33-40
• /
• 1997

The microbial growth of fresh, vacuum packaged, cook-in-bag uncured beef patties was determined in two film structures, a commercial (PE/EVOH), and super barrier ($SiO_2$ coated polyester) material. Packaged samples were cooked to internal temperature of 71 and $82^{\circ}C$ for 30 minutes, and stored in temperature abused ($23{\pm}2^{\circ}C$) and refrigerated storage ($4-6^{\circ}C$). Barrier properties had a significant effect (p<0.001) on aerobic and mesophilic growth in the abused condition. Cooking temperatures had a statistically significant effect (p<0.05) on aerobic growth in the refrigerated condition. The growth of anaerobes and psychrophiles were not significantly effected by either variables. Storage times had the most significant effect (p<0.001) for all groups of microorganisms. The physical properties of the commercial film (strength, thickness, and shrinkage) were changed after exposure to thermal treatment, while the super barrier package had actually no change.