• 한국분말재료학회지
• /
• 제13권4호
• /
• pp.256-262
• /
• 2006

The amorphous $Fe_{73}Si_{16}B_7Nb_3Cu_1$ alloy strip was pulverized to get a flake-shaped powder after annealing at $425^{\circ}C$ for 90 min and subsequently ground to obtain finer flake-shaped powder by using a ball mill. The powder was mixed with polyimide-based binder of $0.5{\sim}3wt%$, and then the mixture was cold compacted to make a toroidal powder core. After crystallization treatment for 1 hour at $380{\sim}600^{\circ}C$, the powder was transformed from amorphous to nanocrystalline with the grain size of $10{\sim}15nm$. Soft magnetic characteristics of the powder core was optimized at $550{\sim}600^{\circ}C$ with the insulating binder of 3wt%. As a result, the powder core showed the outstanding magnetic properties in terms of core loss and permeability, which were originated from the optimization of the grain size and distribution of the insulating binder.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.158-161
• /
• 2003

Recently, the evolution in production techniques (e.g. high-speed milling), the complex shapes involved in modem production design, and the ever increasing pressure for higher productivity demand a drastic improvement of the dynamic behavior of the machine tool axes used in production machinery. And also machine tools of multi functional and minimized parts are increasingly required as demand of higher accurate in some fields such as electronic and optical components etc. The accuracy and the productivity of machined parts are natural to depend on the linear system of machine tools. The complex workpiece surfaces encountered in present-day products and generated by CAD systems are to be transformed into tool paths for machine tools. The more complex these tool paths and the higher the speed requirements, the higher the acceleration requirements are needed to the machine tool axes and the motion control system, and the more difficult it is to meet the requirements. The traditional indirect drive design for high speed machine tools, which consists of a rotary motor with a ball-screw transmission to the slide, is limited in speed, acceleration, and accuracy. The direct drive design of machine tool axes. which is based on linear motors and which recently appeared on the market. is a viable candidate to meet the ever increasing demands, because of these advantages such as no backlash, less friction, no mechanical limitations on acceleration and velocity and mechanical simplicity. Therefore performance tests were carried out to machine tool axes based on linear motor. Especially, dynamic characteristics were investigated through circular test.

• 여성건강간호학회지
• /
• 제10권4호
• /
• pp.301-310
• /
• 2004

Purpose: The purpose of this study was to develop an exercise program for postmastectomy patients. Method: This study was conducted from October, 2003 to June, 2004. The exercise program was developed based on literature review and needs assessment using focus group interviews. The subjects for the focus group interview consisted of 11 patients, 13 recovering patients, and 20 nurses from 3 hospitals. Development of the program was proceeded with analysusm design and development steps. Result: The results of the needs assessment using the focus group interview showed that the exercise program was imperative for postmastectomy patients. Based on the results, a home video tape containing 3 steps, was developed. Each step includes warming-up, stretching, the main exercise, and cool-down. Steps 2 and 3 include exercises with an elastic band, and an elastic ball. The program was modified after conducting a pre-test. A self-checklist including shoulder mobility, hand strength, arm volume and subjective comments on how they feel will be used before and after the exercise program. Conclusion: The exercise program will improve breast cancer patients' quality of life and their physical well-being. Further studies are recommended to test the effectiveness of the exercise program.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.639-646
• /
• 2015

A treatment for improving the characteristics of a surface is very important in increasing the life of machine parts. Many studies have been carried out on the surface characteristics after such treatments. For enhanced eco-technology, an alternative to a conventional chemical surface treatment process is essential. Ultrasonic nano-crystal surface modification (UNSM) technology is a physical environmentally friendly surface treatment method. This technology was developed in domestic and currently being used. As the mechanism of UNSM technology, a ball tip attached to an ultrasonic vibration device strikes the metal surface at nearly 20,000 times per second. The resulting modified surface layer improves the surface characteristics. This paper describes a self-developed fast tool servo system applied to the UNSM process as a vibration module within a high-frequency bandwidth. After describing the surface modification process based on the material and process changes, the surface characteristics are compared.

• 동아시아식생활학회지
• /
• 제25권4호
• /
• pp.594-606
• /
• 2015

Acculturation may manifest dietary behavioral changes of students from overseas. This study investigated the dietary attitudes, food intakes, and dietary behaviors of 121 Chinese college students residing in Busan, Korea. Using a focus group interview and structured survey, subjects were divided into two groups (SG, LG) based on their self-rated acculturation status. The SG (n=70) and LG (n=51) groups consisted of participants that had resided in Korea for shorter than 18 months versus 18 months or longer, respectively. The SG group was more likely to point out the taste of Korean foods as being too sweet, salty, and spicy but less greasy. A food frequency questionnaire was developed to assess normal intake of Korean ethnic, Chinese ethnic, and common foods. The LG group consumed more Korean foods such as rice cake, dried laver, and radish kimchi but less Chinese foods such as bread glue ball and kidney bean. The LG group consumed more salty and fatty foods and Korean liquors, whereas the SG group consumed more fruits and noodles. Based on the exploratory factor analysis, the SG group showed significantly higher scores for "dietary regularity" but lower scores for "indulgence of unhealthful food" factors. In summation, the LG group became more accustomed to Korean foods and adopted less desirable dietary behaviors compared with the SG group. Findings suggest that the residential period of Chinese college students may be associated with their self-rated acculturation status and food acculturation process, and therefore tailored nutrition education programs are needed to support Chinese students' healthier dietary behaviors and food acculturation process.

• 폴리머
• /
• 제37권4호
• /
• pp.470-477
• /
• 2013

가공이 쉬우면서도 성능이 우수한 염료 감응 태양 전지(DSSC)용 상대 전극을 제조하기 위하여 다중벽 탄소 나노튜브(MWCNT) 기반의 고충전 나노복합 페이스트를 제조하고, MWCNT의 분산 제어가 미치는 영향에 대하여 조사하여 보았다. MWCNT의 분산성을 향상시키기 위하여 폴리스티렌 기반의 기능성 블록 공중합체를 리빙 라디칼 중합법으로 합성하여 MWCNT의 표면 개질제로 사용하였으며, 적절한 용매 조건의 선택을 통하여 고충전 나노복합 페이스트의 가공성이 향상되는 것을 확인할 수 있었다. MWCNT의 분산 제어를 통해 이를 상대 전극으로 도입한 DSSC의 광전 변환 효율이 향상됨을 확인할 수 있었으며, 이는 볼밀법을 이용한 MWCNT의 물리적 분산을 통해서도 검증할 수 있었다. 미량의 platinum(Pt) 나노입자와 복합화시킬 경우, 표준 Pt 상대 전극보다도 더 우수한 성능을 가지는 MWCNT 기반 상대 전극을 제조할 수 있음을 확인하였다.

• 대한지역사회작업치료학회지
• /
• 제7권1호
• /
• pp.1-8
• /
• 2017

목적 : 본 연구는 20대 대학생을 대상으로 전정계 자극 활동이 시 지각 과제 수행에 미치는 영향을 알아보았다. 연구방법 : 2016년 3월14일부터 5월20일까지 충청남도 A대학에 재학 중인 대학생 58명을 대상으로 실시하였다. 세 집단을 무작위 선정하여 A는 전정계 자극활동 없이 일반 사무용 의자에 앉아서 시 지각 과제를 수행하였다. 집단 B와 C는 트램폴린에서 뛰기의 전정계자극 활동을 실시한 후 집단 B는 일반사무용 의자, 집단C는 공 의자에서 시 지각 과제 수행 시간을 측정하였다. 결과 : 전정자극 활동을 실시한 집단과 실시하지 않은 집단 간에 시 지각 과제수행시간에 차이가 나타났다. 전정자극 활동을 전혀 하지 않고 사무용의자에 앉은 집단 A는 전정자극 활동을 하고 사무용 의자에 앉아 과제를 수행한 집단 B(p=.037)와 전정자극 활동 후 공 의자에 앉아 과제를 수행한 C와 차이를 나타냈다(p=.000). 그러나 동일한 전정자극 활동을 하고 사무용 의자에 앉은 집단 B와 공 의자에 앉은 집단 C간에는 차이가 없었다. 결론 : 전정감각 자극활동이 시 지각 과제 수행에 긍정적 영향을 미쳤다. 이후 대상자의 범위를 확대하여 연구를 실시할 필요가 있다.

• 한국분말재료학회지
• /
• 제26권3호
• /
• pp.201-207
• /
• 2019

Tungsten heavy alloys (W-Ni-Fe) play an important role in various industries because of their excellent mechanical properties, such as the excellent hardness of tungsten, low thermal expansion, corrosion resistance of nickel, and ductility of iron. In tungsten heavy alloys, tungsten nanoparticles allow the relatively low-temperature molding of high-melting-point tungsten and can improve densification. In this study, to improve the densification of tungsten heavy alloy, nanoparticles are manufactured by ultrasonic milling of metal oxide. The physical properties of the metal oxide and the solvent viscosity are selected as the main parameters. When the density is low and the Mohs hardness is high, the particle size distribution is relatively high. When the density is high and the Mohs hardness is low, the particle size distribution is relatively low. Additionally, the average particle size tends to decrease with increasing viscosity. Metal oxides prepared by ultrasonic milling in high-viscosity solvent show an average particle size of less than 300 nm based on the dynamic light scattering and scanning electron microscopy analysis. The effects of the physical properties of the metal oxide and the solvent viscosity on the pulverization are analyzed experimentally.

• 마이크로전자및패키징학회지
• /
• 제26권2호
• /
• pp.45-49
• /
• 2019

높은 신뢰성의 n형 Bi-Te-Se계 열전소자 제조를 위한 열간압출 공정을 확립하였다. 용융-응고 공정을 이용하여 Bi-Te-Se 원료잉곳을 합성하였으며, 고에너지 볼밀을 이용하여 평균 ${\sim}30{\mu}m$ 크기의 분말로 분쇄하였다. 일축가압 공정으로 분말을 직경 20 mm의 디스크 형태로 성형한 후 압출용 몰드 설계-제작 및 열간압출 공정 온도와 압력을 제어하여 성형체로부터 00l 방향으로 결정 배향된 지름 1.8 mm의 원통형 고밀도 압출체를 제조하였다. 상온에서 최대 ${\sim}4.1mW/mK^2$의 높은 파워팩터를 나타냈으며, zone melting 공정으로 제조한 상용 열전소재와 비교하여 2배 이상 향상된 기계적 강도 (~50 MPa)를 구현하였다.

• 공학교육연구
• /
• 제23권6호
• /
• pp.3-16
• /
• 2020

This study aims to introduce the ENACT model, which is a systematic teaching-learning model for cultivating social responsibility of science and engineering college students, and to discuss its educational implications. For the development of the ENACT model, we conducted extensive literature reviews on RRI, STEM education, and science and technology studies (STS). In addition, we examined exemplary overseas education programs emphasizing social responsibility of scientists/engineers and citizens. The ENACT model consists of five steps; 1) Engage in SSIs, 2) Navigate SSIs, 3) Anticipate consequences, 4) Conduct scientific and engineering practice, and 5) Take action. This model links Socioscientific Issues (SSI) education with engineering education, dividing the major elements of social responsibility education for scientists and engineers into the dimensions of epistemology and praxis, and reflected them in the model. This effort enables science and engineering college students to pursue more responsible and sustainable development by carrying out the responsible problem-solving process based on an understanding of the nature of science and technology. We plan to implement ENACT model based programs for science and engineering college students and to examine the effects.