• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.58-63
• /
• 2003

This study shows the functional contribution into the public transportation system for congestion area. And there is a introduction for the rapid bus transit developed in Europe community. It can be classified the public transportation as urban transit, subway and bus. For a few years, it has been introduced the AGT system as a role of the alternative and lengthening system of subway line. Recently, there is going on construction of AGT system in some regional cities. The AGT system has advantages in terms of accessibility and cost-effective rather than subway. But the bus system is advantageous at the points rather than AGT system. It is obvious that the bus system is most cost-effective for infrastructure and system rather than any other public transports. If the bus system has punctuality and precise docking, that becomes best choice for public transportation scheme. There are tries to develop new systems by means of the f1les up the advantages in bus and AGT system, which can be classified as BRT(Bus Rapid Transit}. The idea is simple; 'Thirik rail, use advanced buses.' It is introduced the IRISBUS system at this article, which was developed in Europe community. And it is introduced the project architecture to develop the similar system to IRISBUS in KRRI through National Transportation Key Technology R&D Project

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2261-2266
• /
• 2012

The general bus system architecture consists of masters, slaves, arbiter, decoder and so on in shared bus. As several masters can't use a bus concurrently, arbiter plays an role in bus arbitration. In compliance with the selection of arbitration method, The efficiency of bus usage can be determined. Fixed Priority, Round-Robin, TDMA, Lottery arbitration are studied in conventional arbitration method. In this paper, we draw the performance analysis of Fixed Priority, Round Robin, TDMA and Lottery bus arbitration policies due to the data traffic concentration and propose the methods of performance improvement.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.169-174
• /
• 2003

The thermal design of the bus bar of a Gas-Insulated Switchgear(GIS) becomes important since the current-carrying capacity of the GIS is limited by maximum operating temperature. In order to predict temperature rise of the bus bar, a program has been developed. Various heat sources possibly generated in the bus bar are calculated in the program. To estimate temperature rises at the bus bar caused by the heat balance between the heat generation and heat transfer, the finite volume method as well as the $4^{th}$ order Runge-Kutta method has been employed. In the experiments, temperature rises at conductor, contact part and external tank are measured for full-scale gas-insulated bus bars. The comparisons of the predicted values of the heat balance calculation to those of the experiments are made. From the comparisons, it is concluded that the developed program can predict the temperature rise of the bus bar quite well.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.31-38
• /
• 2010

Bus manufacturers have tested and studied the dynamic collapse behavior of a bus body structure in rollover since UN ECE established ECE Regulation 66 to provide the requirement for the strength of bus structure. In spite of the costly cycles of practical tests, however, it is still a hard task to meet the rollover regulation by means of local reinforcements in the bus structure. Therefore it is necessary to develop a well designed strategy for the rollover strength implemented in the early stage of vehicle development. In this study, the suitable development method for each design stage from a component to complete body structure was considered to make a well-established development process of a bus body structure for rollover safety. For the efficient approach of the concept design stage, a numerical model based on the plastic hinge theory was used instead of detailed shell models. After setting up the concept design for the component size and geometry, the shell model was used to confirm and optimize the whole structure composition. The process developed in this study was practically used as an effective method to predict the rollover behavior of a new bus body structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.2009-2014
• /
• 2012

The general bus system architecture consists of masters, slaves, arbiter, decoder and so on in shared bus. As several masters can't use a bus concurrently, arbiter plays an role in bus arbitration. In compliance with the selection of arbitration method, The efficiency of bus usage can be determined. Fixed Priority, Round-Robin, TDMA, Lottery arbitration are studied in conventional arbitration method. In this paper, we draw the performance comparison of TDMA and Lottery bus arbitration policy developed recently due to farious conditions and propose the methods of performance improvement.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.2 s.6
• /
• pp.199-211
• /
• 1995

Bus, Which is together with subway the main part of public transportation modes in the city, is reviewed for the development of an optimal feeder-bus service area. Based on the IDRISI of GIS package, and taking into account of the convenience of downtown-oriented public transportation users at peak time, a model for the development of feeder-bus service area and a solution and introduced. Major result in this study is as follows: Development is given to a model that is designed to overcome the shortage of the existing models, which has limits in simulating the real situation; Variables were used in combination so that bus and subway route, station spacing, and operating frequency can be determined simultaneously, which enables to elucidate the mutual relationship and the structure in public transportation system. A model for feeder-bus area development is also given applied to determination and opening of subway and urban express bus route and new transportation systems. The model developed in this paper is useful in the case of extension and opening of subway and urban express bus route and new transportation Systems.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.55-64
• /
• 2011

This study aims to analyze of the impact of converged information with tourism and Bus Information on recreational bus travel. The research has conducted as the following process : A survey was implemented that the user preference behavior as if they were provided a converged information with tourism and bus information on bus usage. As a result, we found that able to using mobile media, having a experience visiting the tourism site, evaluate willingness to pay of the information highly, the 20s age, increasing income variables are concerned with positive relation, and the factors which are using the main mode by auto and having a auto are negative relation on bus usage actively.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.302-304
• /
• 1998

Self magnetic field in a Bus bar usually degrades the critical current in it. Actually the total critical current of a Bus bar is not the same as the sum of total critical current of each stacked HTS tape. This is due to the self field effects in a bus bar. To reduce the degradations of critical current in a bus bar, we need to analyze the self field distributions in a bus bar. Conceptually, by rearranging the each stacked tapes, the self field effects can be minimized. In this paper, we calculate the self magnetic field distributions across a bus bar analytically, with the variations of the relative angle of the two conductors in a go-and-return pair. As a result, we suggest that the optimum relative angle exist which minimize the self field effect in a bus bar.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1879-1884
• /
• 2013

The general bus system architecture consists of masters, slaves, arbiter, decoder and so on in shared bus. As several masters can't use a bus concurrently, arbiter plays an role in bus arbitration. In compliance with the selection of arbitration method, The efficiency of bus usage can be determined. Fixed Priority, Round-Robin, TDMA, Lottery arbitration are studied in conventional arbitration method. In this paper, we draw the performance analysis of Fixed Priority, Round Robin, TDMA and Lottery bus arbitration policies due to the data traffic concentration and propose the methods of performance improvement.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.12
• /
• pp.680-686
• /
• 2002

In deep-submicron (BSM) design, coupling effects between wires on the bus cause serious problems such as crosstalk delay, noise, and power consumption. Most of the previous works on bus encoding are targeted either to minimize tile power consumption on bus or to minimize the crosstalk delay, but not both. In this paper, we propose a new bus encoding algorithm that minimizes the power consumption on bus and eliminates the crosstalk delay simultaneously. We formulate and solve the problem by minimizing a weighted sum of the self transition and cross-coupled transition activities on bus From experiments using a set of benchmark designs. it is shown that the proposed encoding technique consumes at least 15% less power over the existing techniques, while completely eliminating the crosstalk delay.