• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.2 s.10
• /
• pp.44-54
• /
• 2006

The share rate of bus mode has been decreasing continuously. To solve this problem, the local governments implement Bus Management System(BMS) or Bus Impormation System(BIS). In operating the public transportation preferential policy, it is very important to verify the effectiveness of the projects. This study performed the effectiveness of BMS through before and after study based on the field data. Moreover, this study analyzed the factors affecting to BMS. We anticipate that the results of this study would be useful reference in local government's BMS planning.

• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.500-507
• /
• 2008

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.78-88
• /
• 2014

Now, UTIS collects and provides traffic information by building RSE 1,150(unit) and OBE about 51,000(vehicle). it's inevitable to enlarge traffic information sources which use to improve quality of UTIS traffic information for Stabilizing UTIS's service. but there are missing data sections. And, In this study as a way to overcome these problems, based on BIS(Bus information system) installed and operating in the capital area to develop normal vehicle's link transit time estimation model which is used realtime collecting BMS data, we'll utilize the model to provide missing data section's information. For these problem, we selected partial section of suwon-city, anyang-city followed by drive only way or not and conducted model estimating and verification each of BMS data and UTIS traffic information. Consequently, Case2,4,6,8 presented highly credibility between UTIS communication data and estimated value but In the Case 3,5 we determined to replace communication data of UTIS' missing data section too hard for large error. So we need to apply high credibility model formula adjusting road managing condition and the situation of object section.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.1 s.12
• /
• pp.1-12
• /
• 2007

The objective of Bus Information System developed as a part of the ITS, provides the operation information of buses to passengers and managers. The system uses roadside antennas (reading electronic tags on board buses) to enable wireless communication each other and radio data communication to deliver information about buses and their locations. This information is used to estimate the arrival time of the bus which will be shown on the bus stop message board or via internet. Bus Information System or Bus Management System (BMS) is going ahead and set up in many local governments, and recently quality improvement of the BIS is considered as a very important element in expanding of business or management. Therefore this research wished to contribute rationalization of the system by maintaining optimum quality. An gang was chosen to apply overall quality control process and will be evaluated in terns of its propriety and performance. This study has led the improvement of service and promote the use of public transits, which is the best way to solve the city traffic problem by effective management of public transits.

• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.467-472
• /
• 2008

• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.149-159
• /
• 2012

The evaluation of public transit service quality is more complicated than evaluating other aspects of transportation service. Although various measures of effectiveness [MOEs] for transit service have been studied and applied, a more comprehensive and accurate MOE is still required. In the past, either data from user surveys or the experience of bus agency administrators and/or engineers used to measure the quality of service. However, recently, with reliable and accurate real time data from BMS(Bus Management System) and BIS(Bus Information System), more reliable and accurate MOEs are available. This study develops a service evaluation model from users' perspectives, which is based on user' cost models that consider passenger access time, riding time, waiting time, and discomfort due to in-vehicle overcrowding, violation of traffic laws, and accident rate. For validating proposed model, data from the BMS and transit-fare cards (T-Money Card) for Seoul's No. 472 main bus line were used. Models developed in this study provided reliable results.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.633-637
• /
• 2007

Bimodal Tram is the newly developed vehicle for both the tracked way and the public road. Its operation system has some characteristics including BIS(bus information system)/BMS(bus management system) based on ITS(intelligent Transportation system) which is used presently in public transportation operation system. One of them is more accurate vehicle fleet control based on both magnetic maker position reference system and GPS(global positioning system) and the other is automatic vehicle control for emergency situations by the Bimodal Tram operation system which will be performed by the unified control and operation center. This paper has investigated the requirements and functional definitions necessary to construct the unified control and operation center for Bimodal Tram operation system which will be more efficient and secure public transportation system than the conventional ones.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2463-2466
• /
• 2008

The public transportation in operation or to be planned domestically includes subway, LRT, bimodal tram and bus, which are independently characterized in their passenger capacity and cost. High quality service is generally accompanied by high cost of construction and operation. Thus, ITS, BIS/BMS and BRT system are recently introduced to provide high quality service to the passengers with the cost as low as possible. The bimodal tram is under development to achieve such goals in public transportation. The passenger capacity is approximately expected to be 10,000$\sim$17,000 persons/hour and the construction cost to be 10$\sim$30 million dollars/km. It is possible to construct the infrastructure gradually depending on the demand of transportation in the planned route, which can effectively reduce the initial cost to launch the service. The bimodal tram is developed to provide the advantages of subway and bus to the passengers with respect to the scheduled operation and flexibility of the lines.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.20-26
• /
• 2009

One way to increase public revenue from public parking spaces is by improving the way parking meters gather data. Improved parking meters have evolved that increase car park revenue as well as efficiency in service and operations. It provides parking meters with the capacity to provide real-time information. This information consist primarily of the status of parking spaces (it indicates which expired metered spaces have parked vehicles.) The technology consists of sensors located at meters that report on their condition (i.e. whether it is working or if it is expired). This information is processed by a microprocessor and then sent via an internal wireless modem to the server. This server then processes the information from all the parking meters and sends it to the public institution in charge of them. This system also provides verification of parking permits. For example, disabled people with special license plates can be automatically approved for parking in designated places.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.1-14
• /
• 2008

Mass transit information should contribute many benefits to users. Especially transportation information technology is developing highly with information technology in Korea recently. Hereafter it is expected to provide customized transportation information to users individually with the advent of ubiquitous age in earnest. This public transportation information service can be realized by path finding algorithms in public transportation networks including travel and transfer attributes. In this research, multi objectives such as travel time, transfer time, and number of transfer and so on are constructed with the primary facts influencing users. Moreover, the method reducing user's path finding alternatives arbitrarily is proposed by selecting the best alternative which provides maximum utility to users among non dominated paths. Therefore, the ultimate goal of this study proposes a multi objective shortest paths finding algorithm which can take into account multiple user classes in a transit network with multiple travel modes. The proposed algorithm is demonstrated based on the two case studies - a small toy network and the large-scaled Seoul Metropolitan subway network.