• 제목/요약/키워드: B56

Search Result 2,527, Processing Time 0.028 seconds

A Re-configurable 0.8V 10b 60MS/s 19.2mW 0.13um CMOS ADC Operating down to 0.5V (0.5V까지 재구성 가능한 0.8V 10비트 60MS/s 19.2mW 0.13um CMOS A/D 변환기)

  • Lee, Se-Won;Yoo, Si-Wook;Lee, Seung-Hoon
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.45 no.3
    • /
    • pp.60-68
    • /
    • 2008
  • This work describes a re-configurable 10MS/s to 100MS/s, low-power 10b two-step pipeline ADC operating at a power supply from 0.5V to 1.2V. MOS transistors with a low-threshold voltage are employed partially in the input sampling switches and differential pair of the SHA and MDAC for a proper signal swing margin at a 0.5V supply. The integrated adjustable current reference optimizes the static and dynamic performance of amplifiers at 10b accuracy with a wide range of supply voltages. A signal-isolated layout improves the capacitor mismatch of the MDAC while a switched-bias power-reduction technique reduces the power dissipation of comparators in the flash ADCs. The prototype ADC in a 0.13um CMOS process demonstrates the measured DNL and INL within 0.35LSB and 0.49LSB. The ADC with an active die area of $0.98mm^2$ shows a maximum SNDR and SFDR of 56.0dB and 69.6dB, respectively, and a power consumption of 19.2mW at a nominal condition of 0.8V and 60MS/s.

Effects of Tempering Condition on the Microstructure and Mechanical Properties of 30MnB5 Hot-Stamping steel (핫스탬핑용 30MnB5강의 템퍼링 조건에 따른 미세조직 및 기계적 물성 연구)

  • Jeong, Junyeong;Park, Sang-Cheon;Shin, Ga-Young;Lee, Chang Wook;Kim, Tae-Jeong;Choi, Min-Su
    • Korean Journal of Metals and Materials
    • /
    • v.56 no.11
    • /
    • pp.787-795
    • /
    • 2018
  • The effects of tempering condition on the microstructure and mechanical properties of 30MnB5 hot stamping steel were investigated in this study. Before the tempering, hot-stamped 30MnB5 steel was composed of only ${\alpha}^{\prime}$-martensite microstructure without precipitates. After the tempering at $180^{\circ}C$ for 120 min, nano-sized ${\varepsilon}$-carbides were precipitated in the ${\alpha}^{\prime}$-martensite laths. After tempering at $250^{\circ}C$ for 60 min, cementite was precipitated along the ${\alpha}^{\prime}$-martensite lath boundaries. The cementite was also observed in the specimens tempered at $350^{\circ}C$ for 30 min and $450^{\circ}C$ for 6 min, respectively. The globular ${\alpha}$-ferrite appeared at $350^{\circ}C-30min$ tempering, and the volume fraction of ${\alpha}$-ferrite increased when the tempering temperature was increased. The yield strength increased after tempering, and it reached a peak with the tempering condition of $180^{\circ}C-120min$, due to the nano-sized precipitates in the ${\alpha}^{\prime}$-martensite lath. After the tempering, the steel's ultimate tensile strength (UTS) was decreased due to the reduction in dislocation density and C segregation to lath boundaries. The highest elongation was observed at the $180^{\circ}C-120min$ tempering condition, due to the reduction of residual stress, and the lack of precipitates along the lath boundaries. The $180^{\circ}C-120min$ tempering condition was considered to have outstanding crash performance, according to toughness and anti-intrusion calculation results. In drop tower crash tests, the 30MnB5 door impact beam tempered at $180^{\circ}C$ for 120 min showed better crash performance compared to a 22MnB5 door impact beam.

The Radiative Characteristics of EUV-B over the Korean Peninsula and Exposure Time for Synthesizing Adequate Vitamin D (한반도 EUV-B 복사의 특성분석 및 적정 비타민D 합성을 위한 노출시간 산출)

  • Kwak, Min Kyoung;Kim, Jae Hwan
    • Atmosphere
    • /
    • v.21 no.1
    • /
    • pp.123-130
    • /
    • 2011
  • In this study, we have analyzed the radiative characteristics of erythemal ultraviolet-B (EUV-B from 1999 to 2005) over the Korean Peninsula. EUV-B measured at Gangneung, Anmyondo, Mokpo, and Gosan represents the measurements from clean areas and that at Seoul represents from a polluted area. The magnitudes of EUV-B increase in proportion to the latitudinal decrease. Monthly mean variation of EUV-B at noon shows the maximum value of $158.5mWm^{-2}$ in August and the minimum value of $36.4mWm^{-2}$ in December in the clean areas. Seasonal mean diurnal variation of EUV-B shows a peak around noon (12:00 ~ 13:00 hr) and its intensity varies along with a season in order of summer > spring > fall > winter. The maximum value of $56.4mWm^{-2}$ in summer is three times higher than that in winter ($14.3mWm^{-2}$). The value of EUV-B in the polluted area is lower than that in the clean areas, resulting from the effects of the blocking, reflection, and scattering of EUV-B due to high concentrations of PM10. UV-B is an essential element to synthesize vitamin D in human body. 200 IU(International Unite) of vitamin D can be formed by an exposure of 6-10% of body surface area to 0.5 MED(Minimal Erythemal Dose). In order to form vitamin D, the calculated exposure times to EUV-B are 15 min. in spring, 12 min. in summer, 18 min. in fall, and 37 min. in winter for the clean areas and 16, 16, 24, and 37 min. for the polluted area.

Influence of Temperature and Salinity on the Growth and Size of the Rotifer Brachionus plicatilis and B. rotundiformis (온도와 염분이 Rotifer Brachionus plicatilis와 B. rotundiformis의 성장과 크기에 미치는 영향)

  • Youn, Joo-Yeon;Hur, Sung-Bum
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.44 no.6
    • /
    • pp.658-664
    • /
    • 2011
  • Rotifers of the genus Brachionus are commonly used as a live food for larval fish, and rotifers of different sizes are preferred according the mouth size of the fish. Rotifer species vary in size, and individual size can depend on the temperature and salinity of the rearing environment. We investigated the effects of temperature and salinity for two species, B. plicatilis (250-300 ${\mu}m$) and B. rotundiformis (100-220 ${\mu}m$). Two strains of B. plicatilis (CCUMP 36 and 48) and two strains of B. rotundiformis (CCUMP 51 and 56) were received from the Culture Collection of Useful Marine Plankton (CCUMP) at Pukyong National University and cultured with the green alga, Nannochloris oculata (KMMCC 16) from the Korea Marine Microalgal Culture Center (KMMCC). The growth and size of rotifers were examined at three water temperatures ($16^{\circ}C$, $24^{\circ}C$, $32^{\circ}C$) and four salinities (20 psu, 25 psu, 30 psu, 35 psu) under continuous light (40 ${\mu}molm^{-2}s^{-1}$). The maximum density and growth rate of B. rotundiformis were greater than those of B. plicatilis. The lorica length of B. plicatilis ranged from 215.4 to 269.7 ${\mu}m$ and from 154.9 to 206.6 ${\mu}m$ for B. rotundiformis, depending on strain, temperature and salinity. Rotifers were smaller when cultured at high temperatures, regardless of salinity. B. rotundiformis preferred higher salinity than B. plicatilis. The results demonstrated that the size of rotifers could be controlled to some extent by temperature and salinity.

Isolation of Photosynthetic Bacteria and the Cell Growth on Soybean-Curd Whey Wastes (광합성 세균의 분리 동정 및 두부 유청 폐수에서의 배양조건 검토)

  • Ji, Geun-Eog;Lee, Ke-Ho
    • Korean Journal of Food Science and Technology
    • /
    • v.25 no.2
    • /
    • pp.142-147
    • /
    • 1993
  • For the purpose of fixing solar energy and utilizing water wastes from food industries for SCP(single cell protein), 170 strains of photosynthetic bacteria were isolated from 56 samples. Among 170 strains, B-Ps-106 strain was selected as the most suitable strain and identified as a variant or a relation of Rhodopseudomonas sphaeroides and its growth was better under anaerobic light condition than aerobic condition. The optimum conditions of the cell growth of B-Ps-106 were investigated on soybean-curd whey media. The optimum pH for cell growth was $8.5{\sim}9.0$. The optimum temperature was $30^{\circ}C$ and the optimum light density was above $0.72\;cal/cm^2/min$. The most favorable concentration of $K_2HPO_4\;and\;(NH_4)_2SO_4$ was both 0.9 g/l when added to soybean-curd whey media.

  • PDF

Infection status of anisakid larvae in anchovies purchased from local fishery market near southern and eastern sea in Korea (해안지역에서 시판되는 멸치의 anisakid 유충 감염상)

  • 송수복;이상룡
    • Parasites, Hosts and Diseases
    • /
    • v.33 no.2
    • /
    • pp.95-100
    • /
    • 1995
  • A survey was carried out on the larval anilsakids in anchovies (Engrnuyis jnponica) which were caught from April to .lune in 1993 at the southern and eastern sea in Korea. Anisakids in anchovies were morphological classified into Anisakis type I and II and Contracaecum type B and C, after fixation in 70% alcohol and clearing in lactophenol. A examined. The infection rates showed no relation with length of the anchovies. The numbers of anisakids by organs of anchovies were 96 (56.1%) from the muscle, 65 (38.0%) from the omentum, 7 (4.1%) from the intestine, 2 (1.7%) from the stomach and 1 (0.6%) from the testis. Infection rates of anchovies with anisakids by localities were 5.1% at Taebyon, 8.0% at Sokcho and 9.2% at Chungmu. The larval uisikids in anchovies may infect humans who often eat raw anchovies.

  • PDF

800MHz Band Dual-fed ICS Repeater Antenna with High Isolation (800MHz 대역 고격리 이중급전 ICS 중계기 안테나)

  • Ko, Jin-Hyun;Kim, Gun-Kyun;Rhee, Seung-Yeop;Lee, Jong-Ig
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.20 no.5
    • /
    • pp.867-873
    • /
    • 2016
  • Even if ICS(Interference Cancellation System) repeater is used in wireless communication system, it has the disadvantage that it must have enough distance between Donor and Service antenna to be isolated. In this paper, new ICS repeater integrated antenna with high insolation characteristics is designed. The proposed antenna is fabricated for 800MHz and measured. Bandwidth and gain are optimized by changing the stub lengths near main patch and power divider, and also by changing the size of parasitic patch. The fabricated antenna has a return loss less than -13 dB, a gain over 3 dBi, and an isolation between the donor and the server antennas less than -56 dB from 824~894 MHz for CDMA mobile communication. Therefore, the proposed antenna structure can be applied to eliminate the shadow area and to expand the coverage area for any other wireless communication bands.

Survey Study on the Packed-lunch Boxes for Elementary School Children in Daejeon City (도시지역(都市地域)(대전(大田))일부 국민학교(國民學校) 아동(兒童)의 도시락 실태조사연구(實態調査硏究))

  • Rim, Young-Hie
    • Journal of Nutrition and Health
    • /
    • v.11 no.4
    • /
    • pp.39-48
    • /
    • 1978
  • The present study is concerned with nutritional status and palatability of the packed-lunch in elementary school children in Daejeon city. Rice and side dishes in the lunch box were weighed and the contained nutrients were analyzed by the Food Composition Table. The result of survey is as follows; 1) The means of nutritional values of 523 lunch boxes were calorie 562.48 Cal. percentage of the recommended dietary allowances.(79.11%), protein 19.16gr. (88.43%), animal protein 6.03gr. (83.50%), calcium 110.75mg (48.15%), iron 2.20mg. (56.15%), Vitamin A 328.16 I.U.. (49.22%), Vitamin $B_1$ 0.22mg. (59.45%), Vitamin $B_2$ 0.14mg (32.56%), Niacin 3.20mg. (68.08%), Vitamin C 9.79mg. (73.44%). All the nutrients are under the recommended dietary allowances. 2) The correlation between the boys and girls in the intake of protein, calcium, iron, Vitamin A, Vitamin $B_1$, Niacin index revealed statistical significancy at the level of P<0.01. 3) According to the intake of calorie, the ratio of carbohydrates, protein and fat is 78 : 14 : 8, which is excessive meal of carbohydrate. 4) Among the total intake of the protein consists of 30.20% for the boys and 32.90% for the girls. 5) The most favorite food for boys and girls from the packed-lunch is kimchi, egg, ham, sausage, cuttle-fish, laver and beef, and pork and pickles are most undesirable items. 6) The most favorite snack is bread, cake, ice cream, chocolate, fruits and milk. 7) Both boys and girls like Kimchi, fried and saute foods but dislike Namul (seasoned green vegetables) the most. 8. The side dishes of the packed·lunch lack in variety of cooking method.

  • PDF

Iterative Reduction of Blocking Artifact in Block Transform-Coded Images Using Wavelet Transform (웨이브렛 변환을 이용한 블록기반 변환 부호화 영상에서의 반복적 블록화 현상 제거)

  • 장익훈;김남철
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.24 no.12B
    • /
    • pp.2369-2381
    • /
    • 1999
  • In this paper, we propose an iterative algorithm for reducing the blocking artifact in block transform-coded images by using a wavelet transform. In the proposed method, an image is considered as a set of one-dimensional horizontal and vertical signals and one-dimensional wavelet transform is utilized in which the mother wavelet is the first order derivative of a Gaussian like function. The blocking artifact is reduced by removing the blocking component, that causes the variance at the block boundary position in the first scale wavelet domain to be abnormally higher than those at the other positions, using a minimum mean square error (MMSE) filter in the wavelet domain. This filter minimizes the MSE between the ideal blocking component-free signal and the restored signal in the neighborhood of block boundaries in the wavelet domain. It also uses local variance in the wavelet domain for pixel adaptive processing. The filtering and the projection onto a convex set of quantization constraint are iteratively performed in alternating fashion. Experimental results show that the proposed method yields not only a PSNR improvement of about 0.56-1.07 dB, but also subjective quality nearly free of the blocking artifact and edge blur.

  • PDF

A 10-bit 40-MS/s Low-Power CMOS Pipelined A/D Converter Design (10-bit 40-MS/s 저전력 CMOS 파이프라인 A/D 변환기 설계)

  • Lee, Sea-Young;Yu, Sang-Dae
    • Journal of Sensor Science and Technology
    • /
    • v.6 no.2
    • /
    • pp.137-144
    • /
    • 1997
  • In this paper, the design of a 10-bit 40-MS/s pipelined A/D converter is implemented to achieve low static power dissipation of 70 mW at the ${\pm}2.5\;V$ or +5 V power supply environment for high speed applications. A 1.5 b/stage pipeline architecture in the proposed ADC is used to allow large correction range for comparator offset and perform the fast interstage signal processing. According to necessity of high-performance op amps for design of the ADC, the new op amp with gain boosting based on a typical folded-cascode architecture is designed by using SAPICE that is an automatic design tool of op amps based on circuit simulation. A dynamic comparator with a capacitive reference voltage divider that consumes nearly no static power for this low power ADC was adopted. The ADC implemented using a $1.0{\mu}m$ n-well CMOS technology exhibits a DNL of ${\pm}0.6$ LSB, INL of +1/-0.75 LSB and SNDR of 56.3 dB for 9.97 MHz input while sampling at 40 MHz.

  • PDF