• 한국레이저가공학회지
• /
• 제3권3호
• /
• pp.13-19
• /
• 2000

The stencil is a thin stainless sheet in which a pattern is formed, which is placed on a surface of plate to reproduce the pattern of electric circuit. Conventionally the stencil has been produced by etching process. This process has many anti-environmental factors. In this study, Nd : YAG laser cutting process has been applied for stencil manufacturing. The study is focused on estimating kerf width of laser cut stencil by E.B.P.(Error Back-Propagation). This algorithm is good for estimating target value from input value. In this paper, target value was kerf width, and input values were frequency, pulse width, cutting speed and laser power. E.B.P. after teaming input and target could estimate kerf width from some variables precisely.

• Journal of Magnetics
• /
• 제2권3호
• /
• pp.67-71
• /
• 1997

A new hot-forming process has been studied to produce anisotropic Nd-Fe-B based magnets from melt-spun ribbons. The ribbon fragments were inserted in a Cu tube and hot-deformed together with one-stroke. At a height reduction ratio of 0.44, the melt-spun ribbons were densified into a magnet with a density of 7.14 g/cm3, and showed a (BH)max of 14.6 MGOe. With further deformation, the magnets were plastically deformed with Cu tubes in the lateral direction, and crystallographic anisotropy was introduced. The magnets with a height reduction ratio of 0.75 exhibited magnetic properties of (BH)max = 32.1 MGOe, Br = 11.7 kG, and iHc = 10.6 kOe. This process shows the possibility that the conventional hot-pressing and subsequent die-upsetting for anisotropic magnets can be simplified into a one-step process.

• 한국추진공학회지
• /
• 제18권3호
• /
• pp.17-25
• /
• 2014

본 논문은 장약포의 저장기간에 따른 파단하중 저하에 관하여 감마과정 모델을 이용하여 저장수명을 예측하는 방법에 대한 연구결과이다. 추진제의 자연분해로 발생하는 질소화합물과 장약포의 화학반응은 파단하중을 저하시킨다. 장약포의 가속수명시험 결과에 감마과정 모델을 적용하여 시간의 경과에 따른 상태와 수명을 확률분포로 표현하였다. 저장수명은 중위수로 표현하고 품질보증을 위한 정책결정기준으로 $B_1$ 또는 $B_5$ 수명을 활용하는 것이 적절하다.

• Bulletin of the Korean Chemical Society
• /
• 제17권12호
• /
• pp.1147-1149
• /
• 1996

The trans (2a)-cis (2b) isomerization of [Me2Al(μ-NHtBu)]2 (2) has been studied by 1H NMR spectroscopy. The equilibrium has been observed to follow reversible first order kinetics with ΔH0=2.22±0.07 kJmol-1 and ΔS0=2.85±0.07 JK-1mol-1. The activation parameters for the conversion 2a→2b are ΔH1=49.7±2.3 kJmol-1 and ΔS1=-126.3±0.2 JK-1mo1-1 and for the reverse reaction 2b→2a are ΔH-1=47.5±2.3 kJmol-1 and ΔS-1=-129.1±0.5 JK-1mol-1. The isomerization is markedly accelerated in the presence of Lewis bases. A crossover experiment indicates that the isomer interconversion is a unimolecular process. The large negative entropies of activation suggest either the existence of a sterically congested intermediate or the participation of solvent in the isomerization process.

• Journal of Magnetics
• /
• 제3권1호
• /
• pp.9-14
• /
• 1998

A non-coercive cast Nd-Fe-B-type material can be easily converted into a coercive one by employing HDDR process. Applying the conventional HDDR process to the Nd-Fe-B-type material generally leads to a powder-like material. HDDR treated material in a solid form can, however, be realised if the process is properly modified (solid-HDDR). In the present study, the change of rigidity (compressive strength) of the Nd-Fe-B-type material during the solid-HDDR has been investigated using a homogeneous sintered magnet with composition $Nd_{13.8}Dy_{0.7}Fe_{78.25}Si_{0.15}Mn_{0.6}B_{6.5}.$ It has been found that the low strength of the hydrided material was improved by the subsequent disproportionation. The restoration of the strength was explained by the eutectoid-like disproportionation structure containing fine neodymium hydride rod embedded in tough iron matrix. The high strength of disproportionated material was reduced radically in earlier stage of recombination, and this wes explained by the reduction of the disproportionated phase. The reduced strength was, however, recovered by further recombination, and this was explained by the fact that as the recombination continues the recombined grains adhere together. The optimally HDDR processed material has a comparable or even higher strength with respect to the initial sintered material prior to the solid-HDDR. The present study suggested that the rigidity of Nd-Fe-B-type material could be retained even after the solid-HDDR.

• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.455-462
• /
• 2019

ZrB₂ ceramic and ZrB₂ ceramic composites with the addition of SiC, WC, and SiC/WC are successfully synthesized by a spark plasma sintering method. During high-temperature oxidation, SiC additive form a SiO₂ amorphous outer scale layer and SiC-deplete ZrO₂ scale layer, which decrease the oxidation rate. WC addition forms WO₃ during the oxidation process to result in a ZrO₂/WO₃ liquid sintering layer, which is known to improve the anti-oxidation effect. The addition of SiC and WC to ZrB₂ reduces the oxygen effective diffusivity by one-fifth of that of ZrB₂. The addition of both SiC and WC shows the formation of a SiO₂ outer dense glass layer and ZrO₂/WO₃ layer so that the anti-oxidation effect is improved three times as much as that of ZrB₂. Therefore, SiC- and WC-added ZrB₂ has a lower two-order oxygen effective diffusivity than ZrB₂; it improves the anti-oxidation performance 3 times as much as that of ZrB₂.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권4호
• /
• pp.289-294
• /
• 2008

A 77 GHz 3-stage low noise amplifier (LNA) employing one common source and two cascode stages is developed using $0.13{\mu}m$ CMOS process. To compensate for the low gain which is caused by lossy silicon substrate and parasitic element of CMOS transistor, positive feedback technique using parasitic inductance of bypass capacitor is adopted to cascode stages. The developed LNA shows gain of 7.2 dB, Sl1 of -16.5 dB and S22 of -19.8 dB at 77 GHz. The return loss bandwidth of LNA is 71.6 to 80.9 GHz (12%). The die size is as small as $0.7mm\times0.8mm$ by using bias line as inter-stage matching networks. This LNA shows possibility of 77 GHz automotive RADAR system using $0.13{\mu}m$ CMOS process, which has advantage in cost compared to sub-100 nm CMOS process.

• 대한전자공학회논문지SD
• /
• 제48권7호
• /
• pp.23-29
• /
• 2011

본 논문에서는 GPS 수신기를 위한 dB-선형 특성이 개선된 가변 이득 증폭기 회로를 제안한다. 제안된 dB-선형 전류 발생기는 dB-선형성 오차가 ${\pm}0.15$dB 이내로 개선되었다. 개선된 dB-선형 전류 발생기를 사용하여 GPS 수신기를 위한 가변 이득 증폭기를 설계였다. GPS 수신기의 IF 주파수는 4MHz를 가정하였고, 선형성 요구조건을 도출하여 만족하기 위해 최소 이득일때 24dBm의 IIP3를 만족하도록 하였다. 가변이득 증폭기는 3단으로 구성되어 있으며 DC-오프셋 제거 루프를 통하여 회로의 오프셋 전압을 보상하였다. 설계된 가변 이득 증폭기의 이득은 -8dB~52dB의 범위를 가지며 이득의 dB-선형성은 ${\pm}0.2$dB 이내를 충족한다. 3-dB 주파수 대역폭은 이득에 따라 35MHz~106MHz를 보인다. 가변 이득 증폭기는 CMOS 0.18${\mu}m$ 공정을 이용하여 설계되었으며 전력은 1.8V 전원 전압에서 3mW를 소비한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1994년도 제7회 학술발표회 및 한·일 CVD 심포지움 논문개요집
• /
• pp.23-23
• /
• 1994

• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.560-568
• /
• 2004

We performed the numerical study on the characteristics of the 3-D airflow and dynamic cross contamination in the photolithography process cleanroom. The nonunifurmity, the deflection angle and the global cross contamination were used for analyzing the characteristics and performances of cleanroom. From the numerical results, we knew that the airflow characteristics of the cleanrooms are largely affected by the porosity of panel and the adjustment of dampers and the global cross contamination varies with the location of source and the passage of time through the concentration ratio.