• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.21-27
• /
• 1991

This paper outlines the method of formulating the bi-cubic B-spline surface of ship hull, employing the open uniform knot vector as well as the periodic uniform knot vector. An appropriate set of B-spline control vertices to generate the B-spline surface is determined by obtaining the pseudoinverse matrix of basis functions. The comparison between the given offsets and the resulting coordinates from the generated ship hull surface shows a good agreement. To check the fairness of the surface Gaussian curvature is calculated on many small subpatches and displayed on the black-and-white plot of the isoparametric net of the surface.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.1-14
• /
• 1992

Using form parameters representing geometric characteristics of the form, this paper attempts the generation of 3-D free surface given in terms of B-spline surface equation. This is achieved by coupling the form parameter decision, Coons surface of the form parameters, and B-spline. To check the validing of the present method, a analogous surface to the bulbous bow was generated.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10b
• /
• pp.544-546
• /
• 2000

이 논문에서는 CAGD 및 기하모델링 분야에서 최근 발표된 Universal Parametrization의 계산적 또는 응용적 특성을 고찰하고자 한다. Universal Parametrization을 이용하여 구한 B-spline의 곡선이나 곡면에 아주 자연스러운 특성을 가지고 있다. 뿐만 아니라, 다른 매개변수(Parametrization)을 이용하는 경우, 점들의 기하학적 분포나 곡선/곡면의 차수에 따라 결과의 차이가 심한 경우가 있으나 새로운 방법은 B-spline이라는 기초함수의 특성을 고려한 매개변수법이므로 이러한 결과의 차이를 최대한 줄이는 특성이 있다. 또한 점 데이터에 관해서 Affine Invariant하고 Semi-localness의 특성을 보인다. 이외에도, 계산적인 관점에서 강인성을 보유하고 있고, 많은 응용분야에서 쉽게 자유곡선이나 자유곡면 모델링을 할 수 있도록 한다. 한 예로, 3D 다각형 메쉬로부터 B-spline을 이용한 자유곡면 모델을 구하는 소프트웨어 툴을 설명한다.

• Transactions of Materials Processing
• /
• v.12 no.2
• /
• pp.142-150
• /
• 2003

To construct the extrusion die surface, a B-Spline surface scheme based on the cubic B-Spline curve interpolation method is proposed in the present work. The inlet and outlet profiles are described with B-Spline curves by using the centripetal method for uniform parameterization. The interior control points of surface are generated using the derivative characteristics of B-Spline curve. A complete B-Spline surface is constructed by using appropriate coordinate transformation and knot deletion. In the present study, a quantitative measure for the control of surface is suggested by introducing the tangential vector and inclination angles at the inlet and outlet sections. To verify the validity of the proposed method, automatic surface generation is carried out for the various types of extrusion die surface.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.937-945
• /
• 2000

The assessment of machined surface is difficult because the freeform surface must be evaluated by surface fairness as well as dimensional accuracy. In this study, the machined freeform surface is modeled by interpolating the data measured on the machine tool into the mathematical continuous surface, and then the surface model is improved with the parameterization to minimize surface fairness. The accuracy reliability of the measured data is confirmed through compensation of volumetric errors of the machine tool and of probing errors. Non-uniform B-spline surface interpolation method is adopted to guarantee the continuity of surface model. Surface fairness is evaluated with the consideration of normal curvature on the interpolated surface. The validity and usefulness of the proposed method is examined through computer simulation and experiment on the machine tool.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.31-37
• /
• 1994

When a lot of input data are not distributed uniformly n a chord-span direction or when the given shape is complicated, it is very difficult to obtain an inverse matrix which represents the smooth Bi-cubic B-spline surface of the initial shape. To overcome this problem, we suggest image Surface Expansion Method(ISE Method) which is suggested for vertex creation of B-spline curves and surfaces. Its basic concept, convergency and verification are shown. Also B-spline curves and Surfaces represented by ISE Method were compared with those represented by the existing method which is based on the inverse matrix method, the pseudoinverse matrix method and the chord length approximation method for vertex yielding. Ship Hull Forms which have Knuckle, Bulbous Bow, Transom and Stern frame were represented by the ISE Method.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.4
• /
• pp.19-24
• /
• 2002

항만공사같은 대규모의 매립공사에서 토공작업은 총공사비의 상당한 비중을 차지하므로 경제적인 시공을 위하여 절.성토량은 정확하게 계산되어야 한다. 따라서 본 연구는 주어진 3차원 표고데이터를 지나는 스플라인 곡면을 구하는 알고리즘을 제시함으로써 좀더 정확한 토공량 계산식의 결정을 목표로 한다. 스플라인에 대한 흥미로운 수학적 결과는 무척 많지만 본 연구에서는 스플라인 곡면을 기술하고 또, 그것을 이용하여 토공량 계산을 위한 알고리즘개발을 목표로 하기 때문에 알고리즘과 프로그래밍에 필요한 수학적 내용을 기술하며 그 수치적 계산결과는 Maple 프로그램을 이용하였다. 그리고 정확도를 비교하기 위하여 기존의 방법인 선형점고법, Chamber법, Chen과 Lin의 이론을 컴퓨터프로그램하여 본 연구에서 제시된 방법과 정확도를 비교, 분석한다. 아울러 각 이론식의 결과에 대한 보다 정확한 검사를 위하여 x, y 함수식을 이용한 실험지형을 인위적으로 만들었으며 그 때의 값을 기준값으로 하였다. 따라서 실험수치지형에 대한 기준값이 절대값에 가까우므로 각 토공량식들의 오차규명을 보다 명확하고 확실하게 비교할 수 있도록 하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.957-960
• /
• 1995

A new method is introduced for the parametrization in B-spline surface interpolation. THis method uses the basis function to assign the parameter values to the arbitrary set of geometric data. This method gives us several important advantages in geometric modeling.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.35-44
• /
• 2005

The degree reduction of B-splines is necessary in exchanging parametric curves and surfaces of the different geometric modeling systems because some systems limit the supported maximal degree. In this paper, We provide an our experimental results in approximate conversion for B-splines apply to degree reduction. We utilize the existing Bezier degree reduction methods, and analyze the methods. Also, knot removal algorithm is used to reduce data in the degree reduction Process.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.127-138
• /
• 1997

In this study, a new technique is presented, by which one can define ship hull form with full fairness from the input data of lines. For curve modeling, the de Casteljau Algorithm and Bezier control points are used to express free curves and to establish the unified curve modeling technique which enables one to convert non-uniform B-spline (NUB) curve or cubic spline curve into composite Bezier curves. For surface modeling, the mesh curve net which is required to define surface of ship hull form is interpolated by the method of the unified curve modeling, and the boundary curve segments of Gregory surface patches are generated by remeshing(rearranging) the given mesh curve net. From these boundary information, composite Gregory surfaces of good quality in fairness can be formulated.