1 |
D.Y. Yang, C.H. Han and M.U. Kim, 1986, "A generalized method for analysis of three dimensional extrusion of arbitrarily shaped sections", Int. J. Mech. Sci., Vol. 28, pp. 517-534.
DOI
ScienceOn
|
2 |
M. Kiuchi, 1984, "Overall Analysis of Non-Axisymmetric Extrusion and Drawing", Proc. of 12th NAMRC, pp. 111-119.
|
3 |
V.Nagpal and T.Altan, 1975, "Analysis of the Three-Dimensional Metal Forming in Extrusion of Shapes with Use of Dual Stream Functions", Proc. 3rd North American Met. Res. Conf. Pittsburgh, Penssylvenia, pp. 26-40.
|
4 |
Les Piegl and Wayne Tiller, 1995, The NURBS Book, Springer.
|
5 |
J.S. Gunasekera and S. Hoshino, 1980, "Analysis of Extrusion of Non-Circular Sections through Shaped Dies", Annals of CIRP, Vol. 29, pp. 141-145.
DOI
ScienceOn
|
6 |
D.Y. Yang and C.H. Lee, 1978, "Analysis of Three-Dimensional Extrusion of Section through Curved Dies by Conformal Transformation", Int. J. Mech. Sci., Vol. 20, pp. 541-552.
DOI
ScienceOn
|
7 |
K.F. Celik and N.R. Chitkara, 2002, "Extrusion of non-symmetric U-and I shaped sections through ruled-surface dies : numerical simulations and some experiments", Int. J. Mech. Sci., Vol. 44, pp. 217-246.
DOI
ScienceOn
|
8 |
K.F. Celik and N.R. Chitkara, 2000, "Application of an upper bound method to off-centric extrusion of square sections, analysis and experiments", Int. J. Mech. Sci., Vol. 42, pp. 321-345.
DOI
ScienceOn
|
9 |
N.R. Chitkara and K.F. Celik, 2001, 'Extrusion of non-symmetric T shaped sections, an analysis and some experiments", Int. J. Mech. Sci., Vol. 43, pp. 2961-2987.
DOI
ScienceOn
|
10 |
J.S. Gunasekera, H.L. Gegel, J.C. Malas and S.M. Doraivelu, 1982, "Computer Aided Process Modeling of Hot Forging and Extrusion of Aluminum Alloys", Annals of CIRP, Vol. 31, No. 1, pp. 131-136.
DOI
ScienceOn
|
11 |
V.Nagpal, 1977, "On the Solution of Three-Dimensional Metal Forming Processes", J. Eng. Ind. Trans. ASME Series B. Vol. 99, pp. 624-629.
DOI
|
12 |
유동진, 윤정환, 2000, "박판 성형 해석을 위한 자동 툴 격자 생성에 관한 연구", 한국소성가공학회지, Vol. 9, No. 2, pp. 140-151.
과학기술학회마을
|