• 한국광학회지
• /
• 제11권3호
• /
• pp.193-197
• /
• 2000

음향파 장벽 구조와 음향광학효과를 이용한 편광모드 변환형 파장가변 광 필터를 LiNbo3와 Ti 이중 확산 공정 기술을 이용하여 제작하였다. 1552.6nm 파장의 TE, TM 입사 편광모드에 대해서 173.07MHz, 173.05MHz의 Rf 주파수에서 81% 이상의 변환효율과 ∼200kHz(∼1.83nm)의 통과대역폭을 얻어Tdmaum 구동파워는 10.97mW로서 음향파 장벽이 없는 광 필터 파워의 10%에 불과 하였다. 파장 변화율과 부 모드 레벨리 각각 8.2nm/MHz와 -4dB로 측정하였다.

• Mass Spectrometry Letters
• /
• 제2권1호
• /
• pp.8-11
• /
• 2011

Two types of glycerolipids [monoacylglycerols (MAG) and cyclitols] were isolated by reversed phase high-performance liquid chromatography from the methanol extracts of a marine sponge, and analyzed by fast atom bombardment mass spectrometry (FAB-MS) in positive-ion mode. FAB mass spectra of these compounds yielded protonated molecules $[M + H]^+$ and abundant sodiated molecules $[M + Na]^+$ from a mixture of 3-nitrobenzyl alcohol and NaI. The structures of these compounds were elucidated by FAB-collisional-induced dissociation (CID)-tandem mass spectrometry. We carried out collision-indused dissociation (CID) of these lipids in B/E-linked scan mode. The CID B/E-linked scan of $[M + H]^+$ and $[M + Na]^+$ precursor ions resulted in the formation of numerous characteristic product ions through a series of dissociative processes. The product ions formed by charge-remote fragmentation (CRF) provided important information for the identification of the acyl chain structure substituted at the glycerol backbone. Some of the product the ions were diagnostic for the presence of a glycerol backbone or acyl chain structure.

• 한국통신학회논문지
• /
• 제24권10A호
• /
• pp.1597-1602
• /
• 1999

B-ISDN에 쓰이는 ATM 교환기 스위치 링크 및 망동기용 아날로그 / 디지털 혼합형 주파수 체배 분배 ASIC을 설계하였다. 이 ASIC은 46.94 MHz의 외부 입력 클럭을 이용하여 234.7 MHz의 시스템 클럭 및 77.76 MHz, 19.44 MHz의 가입자 클럭을 발생시키는 역학을 하며, 여러 개의 외부 입력 클럭에 대한 체크 및 선택 기능도 동시에 포함한다. 효율적인 ASIC 구성을 위하여 고속의 클럭 발생을 위한 아날로그 PLL 회로는 전주문 방식을, 외부 입력 클럭 체크 및 선택을 위한 디지털 회로는 표준셀 방식을 사용하여 아날로그 / 디지털 혼합 방식으로 설계하였으며, 0.8 $\mu\textrm{m}$ 디지털 CMOS 공정으로 제작 가능하도록 저항 및 커패시터를 특별한 방법으로 레이아웃 하였다.

• 약학회지
• /
• 제49권6호
• /
• pp.484-489
• /
• 2005

Streptococcus pmeumoniae is the leading cause of pneumonia and bacterial meningitis. The current polysaccharide vaccine has been reported ineffective in elderly adults and children less than 2 years of age. Thus, in recent many researchers have been focused on a different approach, DNA vaccine. In our laboratory we developed a Streptococcus pneumoniae DNA (SPDNA) vaccine. This SPDNA vaccine was formulated by inserting the region encoding part of the capsule in the S. pneumoniae into the LAMP-1. In present work, with use of the SPDNA vaccine we attempted to establish a certain methodology useful for evaluation of effectiveness and immunoresponse of a DNA vaccine. Results showed that the subcutaneous route was the most effective for production of antisera specific for S. pneumoniae in mice. By isotyping analyses, IgM, IgGl, IgG2a, and IgG2b were determined. In addition, INF-$\gamma$ and IL-4 were predominantly detected. Combination of those data resulted in a pattern of IgGl < IgG2a=IgG2b and INF$\gamma\>$ >IL-4, which indicates the inmmunity towards the Thl response predominantly; furthermore, the SPDNA vaccination induced resistance of the CD4+T lymphocyte-depleted mice against disseminated pneumococcal infection. These data appear to be possibly due to activation of CDS8+T cell-activation. Taken together, this methodology can be applied for evaluating efficacy and mode of action of a DNA vaccine as minimum critera.

• Journal of electromagnetic engineering and science
• /
• 제17권1호
• /
• pp.1-8
• /
• 2017

This paper introduces a technique to obtain the broadband characteristics of circularly polarized antennas using an L-shaped probe. A waveguide antenna is suitable for obtaining high gain and handling convenience in some applications; however, the asymmetrical structure of the L-shaped probe results in cross-polarization and frequency dependence on the field distribution of higher-order modes (HOM). In addition to the basic characteristics of a waveguide antenna with an L-shaped probe, the author discusses some techniques to reduce the HOM and cross-polarization. As a result, the 3-dB axial ratio (AR) is obtained with the fundamental mode even when the frequency is expanded to the region for HOM of TM. This reduction is mainly due to the cutoff structure to the TM mode around the short wall of the waveguide. Furthermore, some aperture modification techniques can reduce the cross-polarization in a wide range of angles in the radiation pattern. Such techniques and their mechanisms are discussed in this paper. The obtained performance shows that the proposed antennas have a wide range of angles of 3-dB AR in the radiation pattern, broadband characteristics in impedance and AR, and low variation in group velocity.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권10호
• /
• pp.587-594
• /
• 2002

A low frequency square wave electronic ballast for the high intensity discharge(HID) lamps using fuzzy logic controller is developed. This electronic ballast consists a buck converter, a low frequency square wave full bridge inverter, a high voltage pulse generator for the HID lamp ignition, an over current protection circuit and an 8-bit microcontroller. The ballast system is operated on the constant current mode during the HID lamp start-up process and the system is operated on the constant power mode during steady state. Experimental results show that the fuzzy logic control operation is carried out successfully by the 8-bit microcontroller PIC16F877 In this electronic ballast system, in spite of the limited control bandwidth caused by low operating speed of the microcontroller, the good performance in the constant lamp current characteristic is obtained. Acoustic resonance of the HID lamps can be effectively avoided because the instantaneous In lamp power is fully constant due to the low frequency square wave drive.

• 대한기계학회논문집B
• /
• 제33권8호
• /
• pp.573-579
• /
• 2009

A thermal mass air flow sensor, which consists of a micro-heater and thermal sensors on the silicon-nitride thin membrane structure, is micro-fabricated by MEMS processes. Three thermo-resistive sensors, one for the measurement of microheater temperature, the others for the measurement of membrane temperature upstream and downstream of the micro-heater respectively, are used. The micro-heater is operated under the constant temperature difference mode via a real time controller, based on inlet air temperature. Two design models for microfabricated flow sensor are compared with experimental results and confirmed their applicabilities and limitations. The thermal characteristics are measured to find the best flow indicator. It is found that two normalized temperature indicators can be adopted with some advantages in practice. The flow sensor with this control mode can be adopted for wide capability of high speed and sensitivity in the very low and medium velocity ranges.

• ETRI Journal
• /
• 제33권5호
• /
• pp.689-694
• /
• 2011

In this paper, we study scheduling schemes for two-user two-way wireless relaying systems. Two transmission modes are considered: point-to-point direct transmission and two-way amplify-and-forward relaying. An optimal scheduling scheme that opportunistically selects the best transmission mode for each user is proposed to minimize the sum bit error rate (BER). The performance lower bound of the optimal scheduling scheme is analyzed, and closed-form expression of the lower-bound BER is derived. However, for optimal scheduling, the scheduler requires the knowledge of channel state information (CSI) of all links. To reduce the feedback information of CSI, we also propose a suboptimal scheduling scheme that selects the transmission mode using only the CSI of two direct links. Simulation results show that there are 4 dB to 8 dB gains for the proposed optimal and suboptimal schemes over the fixed direct transmission and fixed two-way relayed transmission scheme. The performance gap between the optimal and suboptimal scheduling schemes is small, which implies a good trade-off between implementation complexity and system performance.

• Bulletin of the Korean Chemical Society
• /
• 제28권6호
• /
• pp.959-964
• /
• 2007

The benzene complexes with dimethyl sulfur (DMS) and fluorinated DMS (FDMS) have been investigated using ab initio calculations. The natural bond orbital (NBO) charge population on S atom varies remarkably for different conformations of DMS and FDMS, which determines the possible binding modes for their benzene complexes. The electronegative substituent at the methyl group of DMS causes a significant change in the molecular electrostatic potential around the sulfur atom and changes the interaction mode with aromatic ring. It was found that the sulfur…π interaction mode does not occur in the DMS-benzene complex, while it does in the FDMS-benzene complex. Both B3LYP and MP2 methods provide reliable structures, while the interaction energy obtained by B3LYP is unreliable.

• 한국광학회지
• /
• 제11권5호
• /
• pp.340-346
• /
• 2000

최근 모드변환기가 집적된 진행파형 반도체 광증폭기(SSC-TW-SOA)가 광섬유와의 광결합 효율 향상 및 저가격화를 위해 활발히 연구되고 있다. 본 연구에서는 모드변환기의 구조가 단면 반사율에 미치는 영향을 실험 및 이론적으로 조사하였다. SSC-TW-SOA의 유효단면반사율을 낮추기 위해서는 수직 및 수평방향으로 충분히 모드변환을 행하고 동시에 기운단면 구조를 채용하는 것이 매우 효과적임을 이론적 및 실험적으로 확인하였다. 수직 및 수평방향의 모드변환기가 집적된 TW-SOA에 $20\mu\textrm{m}$ 길이의 창구조, $7^{\circ}$기운단면, 1% 무반사 코팅을 도입함으로써 0.1dB 이하의 작은 ASE ripple를 얻을 수 있었다.