• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.622-628
• /
• 2016

The prosperity of IT technologies and the removal of restrictions regarding Unmanned Aerial Vehicles (UAVs), also known as drones, have driven growth in their popularity. However, without a proper solution to the problem of accident avoidance for UAVs, this popularity increases the potential for collisions between UAVs and between UAV and terrain features. These collisions can occur because UAVs to date have flown using radio control or image recognition based autonomous navigation. Therefore, we propose efficient UAV routing schemes to tackle the collision problem using vehicular communication systems. Performance evaluation by computer simulation shows that the proposed methods effectively reduce the collision probability and improve the routing efficiency of the UAV. Furthermore, the proposed algorithms are compatible and can be directly applied with small overhead to the commercial vehicular communication system implementation.

• Journal of Software Engineering Society
• /
• v.29 no.1
• /
• pp.13-21
• /
• 2020

As CNN model is applied to various domains such as image classification and object detection, the performance of CNN model which is used to safety critical system like autonomous vehicles should be reliable. To evaluate that CNN model can sustain the performance in various environments, we developed an image data augmentation apparatus which generates images that is changed background. If an image which contains object is entered into the apparatus, it extracts an object image from the entered image and generate s composed images by synthesizing the object image with collected background images. A s a method to evaluate a CNN model, the apparatus generate s new test images from original test images, and we evaluate the CNN model by the new test image. As a case study, we generated new test images from Pascal VOC2007 and evaluated a YOLOv3 model with the new images. As a result, it was detected that mAP of new test images is almost 0.11 lower than mAP of the original test images.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.11
• /
• pp.912-918
• /
• 2016

This paper presents various strategies for humanoid vehicle driving and egress tasks. For driving, a tele-operating system that controls a robot based on a human operator's commands is built. In addition, an autonomous assistant module is developed for the operator. Normal position control can result in severe damage to robots when they egress from vehicles. To prevent this problem, another approach that mixes various joint control techniques is adopted in this study. Additionally, a footplate is newly designed and attached to the vehicle floor for the ground landing phase of the egress task. The attached plate enables the robot to step down onto the ground in a safe manner. For stable locomotion, a balance controller is designed for the humanoid. For the design of the controller, the robot is modeled using an inverted pendulum that consists of a spring and a damper. Then, a state feedback controller (with pole placement and a state observer) is built based on the simplified model. Many approaches that are presented in this paper were successfully applied to a full-sized humanoid, DRC-HUBO+, in the DARPA Robotics Challenge Finals, which were held in the United States in 2015.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.410-415
• /
• 2004

Employing knowledge of adaptive possibilities of agents in multi-agents system, we have explored new aspects of distributed modular systems for building ubiquitous heterogeneous robotic systems using intelligent building blocks (I-BLOCKS) [1] as reconfigurable modules. This paper describes early technological approaches related to technical design, experimental developments and evaluation of adaptive processing and information interaction among I-BLOCKS allowing users to easily develop modular robotic systems. The processing technology presented in this paper is embedded inside each $DUPLO^1$ brick by microprocessor as well as selected sensors and actuators in addition. Behaviors of an I-BLOCKS modular structure are defined by the internal processing functionality of each I-Block in such structure and communication capacities between I-BLOCKS. Users of the I-BLOCKS system can easily do 'programming by building' and thereby create specific functionalities of a modular robotic structure of intelligent artefacts without the need to learn and use traditional programming language. From investigating different effects of modern artificial intelligence, I-BLOCKS we have developed might possibly contain potential possibilities for developing modular robotic system with different types of morphology, functionality and behavior. To assess these potential I-BLOCKS possibilities, the paper presents a limited range of different experimental scenarios in which I-BLOCKS have been used to set-up reconfigurable modular robots. The paper also reports briefly about earlier experiments of I-BLOCKS created on users' natural inspiration by a just defined concept of modular artefacts.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.440-447
• /
• 2017

Spectrum level for the acoustic roughness of wheels and rail surface should be periodically maintained under the limitation of ISO to reduce rolling noise of railway vehicles. Thus, in maintaining railway track, displacement sensor-based measuring devices are broadly used to measure the surface roughness and to perform spectral analysis. However, these measuring devices cause unexpected measuring errors since the displacement sensors are fixed at moving platforms and the main frame produces pitching motion during measurement. To increase the accuracy of the measured values, this paper has investigated the effects of design variables such as wheel base, additional wheels, and elastic deformation of wheels on the surface roughness and acoustic roughness spectrum.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.237-244
• /
• 2020

This paper describes an implement of Simultaneous Localization and Mapping(SLAM) in two dimensional space. The method uses Invariant Extended Kalman Filter(IEKF), which transforms the state variables and measurement variables so that the transformed variables constitute a linear space when variables called the invariant quantities are kept constant. Therefore, the IEKF guarantees convergence provided in the invariant quantities are kept constant. The proposed IEKF approach uses Lie group matrix for the transformation. The method is tested through simulation, and the results show that the Kalman gain is constant as it is the case for the linear Kalman filter. The coherence between the estimated locations of the vehicle and the detected objects verifies the estimation performance of the method.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.68-72
• /
• 2004

A practical method to investigate the user interface of web based Flexible Manufacturing System(FMS) on the internet environment is established. Because the industrial FMS controller requires a lot of gadget, such as switch, dial, button, etc., for actual work-site flexible operation sufficiently, the user interface of the controller is significantly complex. The support for operational convenience of FMS controller can increase productivity and efficiency of the user, operational personnel of FMS. While most FMS provide their application programming interface(API) and graphical user interface(GUI) with adequate mechanism itself when used in stand alone, there is increasing demand for FMS that can operate with the intuitional user interface find virtual reality(V/R) environment. This thesis considers the intuitional user interface of Web-based FMS first, and from this, goes a step further, improves as virtual reality environment of FMS on the internet environments by using the feature based modeling technique approach and cartoon rendering. The feature-based modeling technique approach is applied to FMS line which is consist of facilities such as machining center, CNC lathe, autonomous guided vehicle, rail guided vehicle, and various controllers. In this study, the FMS established the intuitional user interface is able to obtain not only the operational convenience but also the enough productivity and significant efficiency.

• Journal of the Korean Society of Safety
• /
• v.26 no.6
• /
• pp.130-136
• /
• 2011

Since out of a lot of traffic problems traffic accidents cause damage to life and properties of people, it stands out as one of traffic problems which needs improvement, and the loss due to traffic accident negatively affects not only the parties to the accident but also the national economy. Thus, continual concern of the government toward traffic safety is getting bigger and lately each local government is preparing a basic plan for traffic safety and vitalizing traffic safety policies. As expanding the responsibility and role of local governments for traffic safety, traffic safety measures which are based on the characteristics of each local government should be studied. Most of analytical methods in the existing traffic accidents prediction models with macroscopic vision focus on socioeconomic variables such as local population and the number of registered vehicles, and present a great deal of prediction error when they are applied in practice. In this context, this study proposed a traffic accident prediction model in respect of macroscopic level for autonomous districts (administrative districts) of Seoul City. The model development was not based on the entire city but on the type of local land usage (development density) whose relationship with traffic accident frequency was analyzed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.731-733
• /
• 2016

The primary goal of the line tracer is to accurately and quickly detect the movement up to the target position given by the sensor juhaengseon. It has been used in applications in various fields such as the current unmanned transport vehicles, laser cutting machine, autonomous mobile robots and unmanned driving is possible, and is held annually at various universities in the competition field with the possibility of great progress, depending on the application. However, there arises a large difference in running performance, depending on the hardware design and control. In this paper, improving the characteristics of the tracer line and characters to design a PID controller is to apply the point on ways of improving the properties of the system.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.5
• /
• pp.402-409
• /
• 2018

This paper describes the plan and procedure of a development test and evaluation that will be performed to verify the performance and technology of multi-mission unmanned surface vehicles (MMUSVs). In order to verify the design requirement of MMUSVs, we designed and manufactured the common platform of MMUSVs, which have an overall length of8.4 m, a displacement of 3,100 kg, and a speed of more than35 kts. The platform is equipped with several sub-systems, including radar and an EOTS/IRS. The EOTS/IRS, along with the search radar, is used for effective detection, identification, and targeting. The core technologies of MMUSV for DT&E will be investigated. The common platform design technologies, remote operating and control system technologies, autonomous navigation technologies, and unmanned operational technology of sensors and equipment will be studied for the development of the MMUSV's core technologies. The system will be able to make precise observations and track targets both manually and automatically during day and night conditions. Currently, the verification tests for each of the technologies and for the integrated system are in the pipeline for DT&E, which will be performed next year. Also, software reliability and life tests will be performed.