• Journal of Environmental Health Sciences
• /
• v.41 no.1
• /
• pp.17-23
• /
• 2015

Objectives: The cytotoxcities of Au, Ag, SWCNT, $SiO_2$, and ZnO nanomaterials were evaluated in order to assess their potential toxicological effects in in vitro cell models using colony forming efficiency (CFE) assay. Methods: The CFE assay of the test materials was carried out on Hep G2 cells. The size distribution of nanomaterials was studied by transmission electron microscopy (TEM). Changes in cell viability after treatment with a toxicant will result in a decreased number of colonies formed in comparison to solvent. Results: The TEM images show that all the particles except SWCNT and ZnO can be considered approximately spherical. The gold and $SiO_2$ nanoparticles show no response (no toxicity) in concentration response experiments. A statistically significant toxic effect was found in Hep G2 cells treated with Ag, SWCNT and ZnO nanomaterials. Conclusion: In this study, we considered CFE assay to be a promising test for screening studies for cytotoxicity with physicochemical analysis.

• Journal of Information Display
• /
• v.10 no.3
• /
• pp.131-136
• /
• 2009

This is a report on the fabrication of a flexible OTFT backplane for electrophoretic display (EPD) using a printing technology. A practical printing technology for a polycarbonate substrate was developed by combining the conventional screen and inkjet printing technologies with the wet etching and oxygen plasma processes. For the gate electrode, the screen printing technology with Ag ink was developed to define the minimum line width of ${\sim}5{\mu}m$ and the thickness of ${\sim}70nm$ with the resistivity of ${\sim}10^{-6}{\Omega}{\cdot}cm$, which are suitable for displays with SVGA resolution. For the source and drain (S/D) electrodes, PEDOT:PSS, whose conductivity was drastically enhanced to 450 S/cm by adding 10 wt% glycerol, was adopted. In addition, the modified PEDOT:PSS could be neatly confined in the specific S/D electrode area that had been pretreated with oxygen. The OTFTs that made use of the developed printing technology produced a mobility of ${\sim}0.13cm^2/Vs.ec$ and an on/off current ratio of ${\sim}10^6$, which are comparable to those using thermally evaporated Au for the S/D electrode.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.720-725
• /
• 2012

Sodium hypochlorite is used worldwide as a water disinfectant and in bleaching agent. Sodium hypochlorite applied to water initially undergoes hydrolysis to form free chlorine consisting of hypochlorous acid(HOCl) and hypochlorite ion($OCl^-$). For free chlorine determination, an electrochemical method is simple due to the electroactivity of free chlorine; it measures current and is free of most reagents. Amperometric free chlorine sensor has been developed with gold (Au)-based electrode. The 3-electrode free chlorine sensor whose working and counter electrodes were Pt exhibited excellent response to HClO at +400mV vs. Ag/AgCl/sat. KCl. In addition, the use of a pH error correction algorithm provided a reliable measurement of residual free chlorine in water sample without any pretreatment in the normal pH range(pH 6~8) of municipal water supply. The free chlorine sensor installed in on-line monitoring system could be used to continually monitor the level of residual free chlorine in real samples.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.11
• /
• pp.1183-1189
• /
• 2012

Organic light-emitting diodes (OLEDs) using microcavity effect have attracted great attention because they can reduce the width of emission spectra from organic materials, and enhance brightness from the same material. We demonstrate the simulation results of the radiation properties from top-emitting organic light-emitting diodes (TE-OLEDs) with microcavity structures based on the general electromagnetic theory. Organic materials such as N,N'-di (naphthalene-1-yl)-N,N'-diphenylbenzidine (NPB) as a hole transport layer and tris (8-hydroxyquinoline) ($Alq_3$) as emitting and electron transporting layer are used to form the OLEDs. The organic materials were sandwiched between anode such as Ni or Au and cathode such as Al, Ag, or Al:Ag. The devices were characterized with electroluminescence phenomenon. We confirmed that the simulation results are consistent with experimental results.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.105-108
• /
• 2002

환경에 관한 관심이 증대되면서 Sn37Pb 솔더를 대체하기 위한 새로운 무연솔더의 개발이 진행되고 있다1). 또한 연구의 초점이 되고 있는 것이 플럭스의 사용에 관한 것이다. 플럭스는 솔더의 산화막을 제거하는데 필수적이지만, 플럭스 세정제의 독성 문제로 무플럭스 솔더링에 대한 관심이 크게 증대되고 있다2),3). 무플럭스 솔더링의 방법에는 여러 가지가 있으며, 그 중 한가지가 플라즈마를 이용한 방법이다4). 본 연구에서는 솔더표면의 이물질과 산화막을 제거하기 위한 플라즈마 처리가 접합 후, 접합부에 미치는 영향에 대해서 알아보았다. 기판은 Evaporator를 이용하여 Au/Cu/Ni/Al UBM을 증착한 Si-wafer를 사용하였다. 사용된 솔더는 Sn37Pb, Sn3.5Ag와 Sn3.5Ag0.7Cu 솔더볼이며, 열중 및 적외선 겸용 리플로 머신과 Ar＋H$_2$를 이용한 플라즈마 에쳐를 사용하여 범프를 형성하였다. 플라즈마 처리가 계면의 미세조직과 기계적 강도에 끼치는 영향을 알아보기 위하여 플라즈마 처리된 시편과 리플로 한 후의 시편을 비교 분석하였다. 전단시험기로 계면의 강도를 측정하였으며, 주사전자현미경으로 범프의 표면과 계면 및 전단파면을 관찰하고 이에 대하여 고찰하였다. 산화막제거를 위한 플라즈마 처리가 저음점인 솔더의 미세조직을 기존의 솔더링 접합부와는 다르게 변화시킴으로써 솔더부의 전체적인 특성에 영향을 끼치는 것을 알 수 있었다.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.537-549
• /
• 2007

The characteristics of the mineralization and geology in the northern Mt. Taebaek mining district are found to be similar with those reported from Nevada district where the Carlin-type gold deposit occurs characteristically as repeated metallic ore deposits in space and time. Though two spots of hs and several spots of Sb anomalies were recognized in the Yeongweol area, they have no relationship with any metalliferous mineralization. On the other hand, two spots of As anomaly in the Jeongseon area have shown to be related with metalliferous ore deposits (mainly Ag-Au), and they are closely associated with Sb anomaly. Some elements of altered limestones in the study such as Au, Ag, As, Sb, Cu, Pb, Zn, and Mo area are closely associated together, and are more enriched in the Jeongseon area than in the Yeongweol area. In particular, Sb and As which may reflect the occurrence of the Carlin-type gold deposit are highly enriched. However, the base metals such af Zn and Pb are highly variable according to samples. The patterns of the enrichment factor for Sb and As, as well as those for Ag and Au, are very similar with those reported from the Carlin-type gold deposits in Nevada. These similarities in elemental distribution may imply that hydrothermal ore mineralization in the study areas was possibly originated from a fluid with the characteristics of the Carlin-type gold mineralization found in Nevada, China, and Indonesia. However, the pattern of base metals and Mo are different. This may result from different chemistry and/or mineralogy of host rock in the study areas.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.469-484
• /
• 2022

The Janggun Pb-Zn deposit has been known one of the four largest deposits (Yeonhwa, Shinyemi, Uljin) in South Korea. The geology of this deposit consists of Precambrian Weonnam formation, Yulri group, Paleozoic Jangsan formation, Dueumri formation, Janggum limestone formation, Dongsugok formation, Jaesan formation and Mesozoic Dongwhachi formation and Chungyang granite. This Pb-Zn deposit is hydrothermal replacement deposit in Paleozoic Janggum limestone formation. The wallrock alteration that is remarkably recognized with Pb-Zn mineralization at this deposit consists of mainly rhodochrositization and dolomitization with minor of pyritization, sericitization and chloritization. Wallrock alteration is divided into the five zones (Pb-Zn orebody -> rhodochrosite zone -> dolomite zone -> dolomitic limestone zone -> limestone or dolomitic marble) from orebody to wallrock. The white mica from wallrock alteration occurs as fine or medium aggregate associated with Ca-dolomite, Ferroan ankerite, sideroplesite, rutile, apatite, arsenopyrite, pyrite, sphalerite, galena, quartz, chlorite and calcite. The structural formular of white mica from wallrock alteration is (K_0.77-0.62Na_0.03-0.00Ca_0.03-0.00Ba_0.00Sr_0.01)_0.82-0.64(Al_1.72-1.48Mg_0.48-0.20Fe_0.04-0.01Mn_0.03-0.00Ti_0.01-0.00Cr_{0.00As0.01-0.00}Co_0.03-0.00Zn_0.03-0.00Pb_0.05-0.00Ni_0.01-0.00)_2.07-1.92 (Si_3.43-3.33Al_0.67-0.57)_4.00O₁₀(OH_1.94-1.80F_0.20-0.06)_2.00. It indicated that white mica from wallrock alteration has less K, Na and Ca, and more Si than theoretical dioctahedral micas. The white micas from wallrock alteration of Janggun Pb-Zn deposit, Yeonhwa 1 Pb-Zn deposit and Baekjeon Au-Ag deposit, and limestone of Gumoonso area correspond to muscovite and phengite and white mica from wallrock alteration of Dunjeon Au-Ag deposit corresponds to muscovite. Compositional variations in white mica from wallrock alteration of these deposits and limeston of Gumoonso area are caused by mainly phengitic or Tschermark substitution mechanism (Janggun Pb-Zn deposit), mainly phengitic or Tschermark substitution and partly illitic substitution mechanism (Yeonhwa 1 Pb-Zn deposit, Dunjeon Au-Ag deposit and Baekjeon Au-Ag deposit), and mainly phengitic or Tschermark substitution and partly illitic substitution or Na⁺ <-> K⁺ substitution mechanism (Gumoonso area).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.257-258
• /
• 2012

The SERS spectra of 4-aminobenzenethiol (ABT) have served as the "probe" molecule, which have helped spectroscopists to build up the electromagnetic (EM) and chemical (CHEM) enhancement mechanisms. In particular, the b2-peaks (9b, 3, and 19b) of the SERS spectra of ABT have been attributed to arise from the vibronic charge-transfer (CT) between Au or Ag surface and the ABT. Quite recently, however, Tian and co-workers [1] claimed that the b2-peaks are not the CT-enhanced spectra of ABT. Instead, these peaks arise from the 4,4'-dimercaptoazobenzenes (DMABs) that are produced by the oxidative coupling of two ABTs. Their claim is under intense debate currently. Herein, we studied spatially and temporally resolved SERS spectra of ABTs on Ag thin film (thickness of 10 nm), to investigate such claim. Herein, we present a series of additional evidences that strongly support that the b2 intensities of ABTs do not arise from the CT-enhancement: (1) the b2-peaks can be locally "activated" (i. e. turned on) irreversibly with focused laser radiation; (2) the TOF-SIM spectrometry on the activated region show depletion of ABT-Ag+ ions; and finally (3) the spatially resolved FT-IR spectra of the activated region show two pronounced peaks at 1377 cm-1 and 1460 cm-1, both of which can be assigned to the stretching mode of N=N bond. While the result does not disprove the existence of CT or CHEM enhancement in general, the results do show that previous interpretations of the spectra of ABTs should be re-interpreted.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.1
• /
• pp.143-179
• /
• 1989

To observe the bonding behavior of palladium-based alloys to porcelain; 1. Pd-Co binary alloy with the higher cobalt content, 2. Pd-Co binary alloy with the lower cobalt content, 3. Pd-Ag-Sn ternary alloy, 4. Pd-Ag binary alloy, 5. Pd-Cu-Au ternary alloy and 6. Pd-Cu binary alloy were made as 6 groups of experimental alloys. Each group of alloy was divided into 4 sub-groups such as one sub-group that was not degassed and three sub-groups that degassed for 5 minutes, 10 minutes and 15 minutes. On each specimen, weight changes after degassing, morphological changes of oxide layer by changing the degassing time, compositional changes at metal-ceramic interface and bond strength of metal-ceramic measured with planar shear test were observed and compared. The results of the present study allow the following conclusions to be drawn: 1. The alloy showing the greatest bond strength was Pd-Cu alloy without gold and bond strength was decreased by alloying gold to them. 2. Although Pd-Co alloy showed the most prominent oxidation behavior, bond strength of them to porcelain was not greatly high by the formation of porosities at metal-ceramic interfaces. 3. Likewise tin, cobalt formed the peaks on line profiles at metal-ceramic interface, however copper did not exhibit such peaks on line profiles. 4. Mainly, oxide layer on Pd-Co alloy was composed with cobalt, and for Pd-Co alloy with higher cobalt content the rise of bond strength was not significant by increased degassing time. 5. On Pd-Ag alloy not containing tin, during degassing for 15 minutes silver content was increased at metal-ceramic interface. 6. As an oxidized element, tin formed the oxide layers that widen their area by increasing the degassing time, while cobalt and copper showed the morphological changes of particle or crystal on oxide layer.

• Korean Journal of Metals and Materials
• /
• v.47 no.9
• /
• pp.580-585
• /
• 2009

The effects of shear speed and tip height on the high speed shear test of Sn-3.0wt.%Ag-0.5wt.%Cu ball joints were investigated. Solder balls of $450{\mu}m$ in diameter were reflowed at $245^{\circ}C$ on a FR4 PCB (Printed Circuit Board) in order to obtain a sample for the high-speed shear test. The UBM was comprised of Cu/Ni/Au, and the shear speed and tip height varied from 0.5 to 3.0 m/s, and from 10 to $135{\mu}m$, respectively. According to the experimental results, faster shear speed enhanced the shear strength of the solder joints, regardless of the tip height. The fraction of ductile (solder) fracture decreased when the shearing speed was raised from 0.5 to 3.0 m/s. With an increasing tip height from 10 to 50 and $135{\mu}m$, the fracture mode changed from pad lift to mixed (ductile and brittle) and ductile fracture, respectively, while the shearing energy also increased in the same order. The shear energy had a proportional relationship with the fraction of the solder fracture.