• 제목/요약/키워드: Asynchronous transition

검색결과 41건 처리시간 0.025초

CTTS의 비동기 절체 시 조속기 제어를 통한 과도 개선에 관한 연구 (Study on Transient Improvement through Governor Control under Asynchronous Transition of CTTS)

  • 강병욱;채희석;한운기;임현성;권승옥;김재철
    • 조명전기설비학회논문지
    • /
    • 제29권11호
    • /
    • pp.47-52
    • /
    • 2015
  • This paper derives the problems that occur when asynchronous transfer in case of phase, frequency, voltage between the emergency generator and the grid and proposed the countermeasure to solve this problem when the transfer switch replace ATS(Automatic Transfer Switch) with CTTS(Closed Transition Transfer Switch) for the non-interrupting switching. In order to simulate above cases, modelling was used the transient analysis program PSCAD/EMTDC. By using this, the customer installed emergency generator and the grid was implemented. We compared three cases of asynchronous transition based on the basic case and proposed improvement by controlling the governor of emergency generator.

신호 전이그래프를 이용한 비동기회로의 상위수준 테스트 생성 (High-Level Test Generation for Asynchronous Circuits Using Signal Transition Graph)

  • 오은정;김수현;최호용;이동익
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
    • /
    • pp.137-140
    • /
    • 2000
  • In this paper, we have proposed an efficient test generation method for asynchronous circuits. The test generation is based on specification level, especially on Signal Transition Graph(STG)〔1〕 which is a kind of specification method for asynchronous circuits. To conduct a high-level test generation, we have defined a high-level fault model, called single State Transition Fault(STF) model on STG and proposed a test generation algorithm for STF model. The effectiveness of the proposed fault model and its test generation algorithm is shown by experimental results on a set of benchmarks given in the form of STG. Experimental results show that the generated test for the proposed fault model achieves high fault coverage over single input stuck-at fault model with low cost. We have also proposed extended STF model with additional gate-level information to achieve higher fault coverage in cost of longer execution time.

  • PDF

다입력변화 천이응동비동기순서논리회로의 내부상태 감소법에 관한 연구 (A Method of Interna State reduction in the Synthesis of Multipul-Input asynchronous Sequential circuits Using Transition-Sensitive Flip-Fops)

  • 임재탁;이근영
    • 대한전자공학회논문지
    • /
    • 제11권2호
    • /
    • pp.22-26
    • /
    • 1974
  • 변이응동 비동기순서회로를 합성하기 위하여 D-형 변이응동 flirt-flop을 사용하였다. 입력조의 상이라는 새로운 개념을 도입하여 내부상태를 감소할 수 있었다. 원시상태표로부터 직접 다입력변화 회로를 합성하는 등차를 마련하였고 실례를 들어 지금까지의 방법보다 더 나은 방법임을 실증하였다.

  • PDF

속도 독립 회로 합성을 위한 비동기 유한 상태기로부터 신호전이 그래프로의 변환 (Transformation from asynchronous finite state machines to signal transition graphs for speed-independent circuit synthesis)

  • 정성태
    • 전자공학회논문지A
    • /
    • 제33A권10호
    • /
    • pp.195-204
    • /
    • 1996
  • We suggest a transform method form asynchronous finite state machines (AFSMs) into signal transition graphs (STGs) for speed-independent circuit synthesis. Existing works synthesize nodes in the state graph increases exponentially as the number of input and output signals increases. To overcome the problem of the exponential data complexity, we transform AFSMs into STGs so that the previous synthesis algorihtm form STGs can be applied.Accoridng to the experimental results, it turns out that our synthesis method produces more efficient circuit than the previous synthesis methods.

  • PDF

상태천이확률을 이용한 비동기회로의 저전력 상태할당 알고리즘 (A low power state assignment algorithm for asynchronous circuits using a state transistion probability)

  • 구경회;조경록
    • 전자공학회논문지C
    • /
    • 제34C권12호
    • /
    • pp.1-8
    • /
    • 1997
  • In this paper, a new method of state code assignment for reduction of switching activities of state transition in asynchronous circuits is proposed. The algorithm is based on a on-hot code and modifies it to reduce switching activities. To estimate switching activities as a cost functions we introduce state transition probability (STP). AS a results, the proposed algorithm has an advantage of 60% over with the conventional code assignment in terms of switching and code length of state assignment.

  • PDF

신호전이그래프에 기반한 비동기식 논리합성의 고유한 특성을 고려한 신호전이그래프의 자동생성 (Automatic STG Derivation with Consideration of Special Properties of STG-Based Asynchronous Logic Synthesis)

  • 김의석;이정근;이동익
    • 정보처리학회논문지A
    • /
    • 제9A권3호
    • /
    • pp.351-362
    • /
    • 2002
  • 신호전이그래프는 비동기식 유한상태기와 더불어 신호수준에서 비동기식 제어회로의 사양을 기술하기 위하여 사용되는 가장 대표적인 사양 기술언어이다. 그러나 신호전이그래프는 설계자에게 친숙한 사양기술언어가 아니며, 결과적으로 비동기식 시스템의 설계자가 목적시스템의 비동기식 제어부를 구성하는 수∼수십개의 비동기식 제어회로에 대한 신호전이그래프를 일일이 고안하고 기술하는 것은 매우 힘들고 시간소모적인 일이다. 본 논문에서는 최근에 제안된 프로세스 중심방식을 이용하여 신호전이그래프를 자동으로 생성하는 방법을 제안하고자 한다. 특히, 제안된 방법은 신호전이그래프의 자동생성 과정에서 신호전이그래프에 기반한 비동기식 논리합성의 고유한 특성들을 주의 깊게 고려하여 준다. 결과적으로 자동 생성된 신호전이그래프로부터 합성된 비동기식 제어회로는 면적, 합성시간, 성능, 구현성의 측면에서 매우 우수하다.

Transition-Sensitive Flip-Flops에 의한 비동기 순서논리회로의 합성에 관한 연구 (Synthesis of Asynchronous Sequential Circuits using Transition-Sensitive Flip-Flops)

  • 임제석;이근영
    • 대한전자공학회논문지
    • /
    • 제12권2호
    • /
    • pp.24-27
    • /
    • 1975
  • Transition-Sensitive Flip-Flops(TSFF)에 의하여 원시흐름표로 부터 다입력변화 비동기순서논리회로를 합성하는 하나의 방법을 제안하였다. 목 방법에 의해시 실현한 회로는 Chuang의 그것보다 속도가 빠르다. Chuang의 출력상태를 실현하는 방법은 오진를 범하고 있음을 지적하고 원시흐름표로 부터 출력상태를 제어 여거법에 의해서 간편하게 실현할 수 있음을 보였다.

  • PDF

시간 제한 조건을 가진 자유 선택 신호 전이 그래프로부터 비동기 회로의 합성 (Synthesis of Asynchronous Circuits from Free-Choice Signal Transition Graphs with Timing Constraints)

  • 정성태;정석태
    • 정보처리학회논문지A
    • /
    • 제9A권1호
    • /
    • pp.61-74
    • /
    • 2002
  • 본 논문에서는 시간 제한 조건을 가진 자유 선택 신호 전이 그래프로부터 비동기 회로를 합성하는 방법을 기술한다. 이 방법에서는 상태 그래프를 생성하지 않고 신호 전이 그래프로부터 직접 신호 전이들간의 관계를 구하여 비동기 회로를 합성한다. 본 논문의 합성 방법에서는 자유 선택 신호 전이 그래프를 선택 행위가 없는 결정성 신호 전이 그래프에 대하여 타이밍 분석을 수행하여 임의의 두 신호 전이 사이의 시간 제약 병렬 관계와 시간 제약 인과 관계를 구한다. 다음에는 이 관계들을 이용하여 각 결정성 신호 전이 그래프에 대한 합성을 수행하고 그 결과를 합병함으로써 전체 회로를 합성한다. 실험 결과에 의하면 본 논문에서 제안한 합성 방법은 상태 공간이 큰 회로에 대하여 현저하게 합성시간을 단축시킬 수 있을 뿐 만 아니라 기존의 상태 그래프 기반 합성 방법과 비교하여 거의 같은 면적의 회로를 합성한다.

총이온화선량에 의한 고장이 존재하는 비동기 순차 회로의 교정 제어 (Corrective Control of Asynchronous Sequential Circuits with Faults from Total Ionizing Dose Effects in Space)

  • 양정민;곽성우
    • 제어로봇시스템학회논문지
    • /
    • 제17권11호
    • /
    • pp.1125-1131
    • /
    • 2011
  • This paper presents a control theoretic approach to realizing fault tolerance in asynchronous sequential circuits. The considered asynchronous circuit is assumed to work in space environment and is subject to faults caused by total ionizing dose (TID) effects. In our setting, TID effects cause permanent changes in state transition characteristics of the asynchronous circuit. Under a certain condition of reachability redundancy, it is possible to design a corrective controller so that the closed-loop system can maintain the normal behavior despite occurrences of TID faults. As a case study, the proposed control scheme is applied to an asynchronous arbiter implemented in FPGA.

비동기 상태 피드백 제어를 이용한 TMR 메모리 SEU 극복 (Asynchronous State Feedback Control for SEU Mitigation of TMR Memory)

  • 양정민;곽성우
    • 전기학회논문지
    • /
    • 제57권8호
    • /
    • pp.1440-1446
    • /
    • 2008
  • In this paper, a novel TMR (Triple Modular Redundancy) memory structure is proposed using state feedback control of asynchronous sequential machines. The main ability of the proposed structure is to correct the fault of SEU (Single Event Upset) asynchronously without resorting to the global synchronous clock. A state-feedback controller is combined with the TMR realized as a closed-loop asynchronous machine and corrective behavior is operated whenever an unauthorized state transition is observed so as to recover the failed state of the asynchronous machine to the original one. As a case study, an asynchronous machine modelling of TMR and the detailed procedure of controller construction are presented. A simulation results using VHDL shows the validity of the proposed scheme.