• Bulletin of the Korean Chemical Society
• /
• 제32권11호
• /
• pp.3991-3995
• /
• 2011

$TiO_2-SiO_2-In_2O_3$ nanocomposite thin film was deposited on the glass substrates using a dip coating technique. The morphology, surface composition, surface hydroxyl groups, photocatalytic activity and hydrophilic properties of the thin film were investigated by AFM, XPS, methyl orange decoloring rate and water contact angle measurements. The hydroxyl content for $TiO_2$, $TiO_2-SiO_2$ and $TiO_2-SiO_2-In_2O_3$ nanocomposite films was calculated to be 11.6, 17.1 and 20.7%, respectively. $TiO_2-SiO_2-In_2O_3$ film turned superhydrophilic after 180-min irradiation with respect to pure $TiO_2$ and $TiO_2-SiO_2$ thin films. The photocatalytic decomposition of methyl orange for $TiO_2$, $TiO_2-SiO_2$ and $TiO_2-SiO_2-In_2O_3$ thin films was measured as 38.19, 58.71 and 68.02%, respectively. The results indicated that $SiO_2$ and $In_2O_3$ had a significant effect on the hydrophilic, photocatalytic and self-cleaning properties of $TiO_2$ thin film.

• Advances in materials Research
• /
• 제3권2호
• /
• pp.105-116
• /
• 2014

The microwave dielectric properties of $CeO_2$ nanoparticles (0.5, 1.0 & 1.5wt%) doped $Mg_2TiO_4$ (MTO) ceramics have been investigated at cryogenic temperatures. The XRD patterns of the samples were refined using the full proof program reveal the inverse spinel structure without any secondary phases. The addition of $CeO_2$ nanoparticles lowered the sintering temperature with enhancement in density and grain size as compared to pure MTO ceramics. This is attributed to the higher sintering velocity of the fine particles. Further, the microwave dielectric properties of the MTO ceramics were measured at cryogenic temperatures in the temperature range of 6.5-295 K. It is observed that the loss tangent ($tan{\delta}$) of all the samples increased with temperature. However, the $CeO_2$ nanoparticles doped MTO ceramics manifested lower loss tangents as compared to the pure MTO ceramics. The loss tangents of the pure and MTO ceramics doped with 1.5 wt% of $CeO_2$ nanoparticles measured at 6.5K are found to be $6.6{\times}10^{-5}$ and $5.4{\times}10^{-5}$, respectively. The addition of $CeO_2$ nanoparticles did not cause any changes on the temperature stability of the MTO ceramics at cryogenic temperatures. On the other hand, the temperature coefficient of the permittivity increased with rise in temperature and with the wt% of $CeO_2$ nanoparticles. The obtained lower loss tangent values at cryogenic temperatures can be attributed to the decrease in both intrinsic and extrinsic losses in the MTO ceramics.

• 생명과학회지
• /
• 제29권12호
• /
• pp.1371-1377
• /
• 2019

뇌에서 과량의 reactive oxygen species (ROS) 생성에 의해 유발되는 산화적 스트레스는 알츠하이머 질환과 같은 신경퇴행성 질환의 원인으로 알려져 있다. 본 연구에서는 kaempferol, kaempferol-3-O-glucoside, quercetin, quercetin-3-β-D-glucoside와 같은 flavonoid와 그 배당체의 H₂O₂ 유도 산화적 스트레스에 대한 C6 신경교세포보호 효과를 확인하였다. H₂O₂만을 처리한 control군은 아무것도 처리하지 않은 normal군에 비해 세포 생존율 감소와 ROS 생성 증가를 통해 C6 신경교세포의 산화적 손상이 유도되었음을 확인하였다. 반면 4가지 flavonoid를 각각 처리한 군의 경우, H₂O₂를 처리한 control군에 비해 세포 생존율 증가와 ROS 생성 감소를 통해 산화적 손상 억제를 통한 신경교세포 보호 효과를 확인하였다. Flavonoid의 신경교세포 보호 작용 메커니즘을 규명하기 위해, inducible nitric oxide synthase (iNOS), cyclooxygenase-2 (COX-2), and interleukine (IL)-1β 등의 염증 관련 단백질 발현을 측정하였다. H₂O₂를 처리한 control군은 normal군에 비해 iNOS, COX-2, IL-1β 단백질 발현 증가와 IκB-α 발현 감소를 통해 신경교세포의 산화적 손상으로 인한 염증 반응을 확인하였다. 반면, 4가지 flavonoid를 각각 처리한 군의 경우 iNOS, COX-2, IL-1β 단백질 발현 감소와 IκB-α 발현 증가를 나타내어, 염증 반응 개선을 통한 신경교세포 보호 효과를 확인하였다. 특히, quercetin과 그 배당체인 quercetin-3-β-D-glucoside를 처리한 군은 kaempferol과 그 배당체인 kaempferol-3-O-glucoside를 처리한 군에 비해 우수한 신경교세포 보호 효과를 나타내었다. 본 연구는 4가지 flavonoid가 신경교세포에서 산화적 스트레스 억제를 통해 신경퇴행성 질환을 예방 및 치료할 수 있을 것으로 사료된다.

• 환경생물
• /
• 제40권3호
• /
• pp.267-274
• /
• 2022

양돈 폐수로부터 NH₃를 제거하기 위해서 양돈 폐수의 무게 대비 MgO(wt. %)의 양을 변화시키면서 양돈 폐수에 주입하였다. 24시간 동안 폭기시키면서 MgO (0.8 wt. %)로 처리한 양돈 폐수는 미처리 양돈 폐수에 비하여 NH₃ 가스 발생량이 75.5% 감소하였으며, 1개월 동안 밀폐된 상태에서도 NH₃ 가스가 거의 발생하지 않았다. 본 연구에서 사용한 MgO는 양돈 폐수의 pH를 상승시켜 NH₃가 가스 형태로 탈기될 수 있는 조건을 제공해 주었으며, 과량 주입할 경우에도 호기성 미생물 활동에 악영향을 줄 수 있는 pH 10.5를 초과하지 않았다. 양돈 폐수에서 제거되지 않고 남아 있는 NH₄⁺는 인산과 MgO를 첨가하여 스트루바이트의 형태로 침전시켜 제거하였다. 스트루바이트를 합성하기 위해서 NH₄⁺의 몰비와 동일하게 인산과 MgO를 주입하고 황산을 첨가하여 양돈 폐수의 초기 pH를 5로 조정한 후 점진적으로 폐수의 pH를 상승시켰다. pH 6에서 흰 침전물 소위 스트루바이트가 생성되기 시작하여 pH 10까지 지속적으로 합성이 이루어졌다. 총 86.1%의 NH₄⁺ 제거 중에서 62.4%가 약산성인 pH 6에서 제거되었다. 침전물 중에 스트루바이트의 존재를 XRD로 조사하였고 그 결과 pH 6에서 침전물이 스트루바이트의 결정성을 갖는다고 확인되었다. pH 7~10인 조건에서는 스트루바이트가 비결정질 형태로 존재하며, pH가 11인 이상에서는 생성된 스트루바이트가 완전히 붕괴되었다. 침전물 내에서 스트루바이트의 수득률은 에너지 분산형 X-ray, 열중량분석기, 원소분석기의 결과치를 바탕으로 하여 68%~84%임을 확인할 수 있었다. 만약 NH₃가 제거된 양돈 폐수를 건조 퇴비에 뿌려 부숙하게 된다면 퇴비의 부숙 기간 동안 NH₃로 인한 악취를 상당히 감소시킬 수 있을 것이다. 이와 더불어, MgO로 처리한 양돈 폐수는 가축 퇴비에 인과 질소를 보충하는 역할을 담당할 수 있을 것이다. 앞으로도 본 연구를 계속적으로 진행하여 국내에서 친환경퇴비를 생산할 수 있는 기틀을 마련하고자 한다.

• Journal of Electrochemical Science and Technology
• /
• 제6권4호
• /
• pp.121-130
• /
• 2015

The micro emulsion method has been successfully used for preparing perovskite LaCoO₃ with uniform, fine-shaped nanoparticles showing high activity as electro catalysts in oxygen reduction reactions (ORRs). They are, therefore, promising candidates for the air-cathode in metal-air rechargeable batteries. Since the activity of a catalyst is highly dependent on its specific surface area, nanoparticles of the perovskite catalyst are desirable for catalyzing both oxygen reduction and evolution reactions. Herein, LaCoO₃ powder was also prepared by sol-gel method for comparison, with a broad particle distribution and high agglomeration. The electro catalytic properties of LaCoO₃ and LaCoO₃-carbon Super P mixture layers toward the ORR were studied comparatively using the rotating disk electrode technique in 0.1 M KOH electrolyte to elucidate the effect of carbon Super P. Koutecky-Levich theory was applied to acquire the overall electron transfer number (n) during the ORR, calculated to be ~3.74 for the LaCoO₃-Super P mixture, quite close to the theoretical value (4.0), and ~2.7 for carbon-free LaCoO₃. A synergistic effect toward the ORR is observed when carbon is present in the LaCoO₃ layer. Carbon is assumed to be more than an additive, enhancing the electronic conductivity of the oxide catalyst. It is suggested that ORRs, catalyzed by the LaCoO₃-Super P mixture, are dominated by a 2+2-electron transfer pathway to form the final, hydroxyl ion product.

• 한국수소및신에너지학회논문집
• /
• 제33권1호
• /
• pp.19-27
• /
• 2022

A series of QPAE/TiO₂-x (x = 1, 4, 7 and 10 wt%) organic/inorganic composite membranes were prepared as electrolyte membranes for alkaline anion exchange membrane fuel cells by controlling the content of inorganic filler with quaternized poly(arylene ether) (QPAE) random copolymer. Among the prepared QPAE/TiO₂-x organic/inorganic composite membranes, the highest ionic conductivity was 26.6 mS cm^-1 at 30℃ in QPAE/TiO₂-7 composite membrane, which was improvement over the ionic conductivity value of 6.4 mS cm^-1 (at 30℃) of the pristine QPAE membrane. Furthermore, the water uptake, swelling ratio, ionic exchange capacity, and thermal property of QPAE/TiO₂-x composite membranes were improved compared to the pristine QPAE membrane. The results of these studies suggest that the fabricated QPAE/TiO₂-x composite membranes have good prospects for alkaline anion exchange membrane fuel cell applications.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1222-1230
• /
• 2020

The corrosion rates of the reactor pressure vessel materials of SA508 Grade 3 were measured using a weight loss method in aerated boric acid solutions to simulate the evaporation of leaked PWR primary water in an ambient environment. The corrosion behavior and products were examined using X-ray diffraction and electron microscopy. SA508 showed typical general corrosion characteristics. The corrosion rate increased steadily as the boron concentration was increased. As the immersion time elapsed, the corrosion rate slowly or rapidly decreased according to the oxidation reaction of iron. The corrosion rate showed a complicated pattern depending on the temperature; it increased gradually and then rapidly decreased again when reaching a certain transition temperature. The corrosion products of SA508 were found to be FeO(OH), Fe₂O₃, and Fe₃O₄. As the boron concentration decreased and the temperature was increased, the formation of Fe₃O₄ was more favorable as compared to the formation of FeO(OH) and Fe₂O₃. Consequently, the changes of the corrosion rate and behavior were closely related to the oxidation reaction of iron on the surface. The corrosive damage to SA508 appears to be most severe when the oxidation reaction is such that Fe₂O₃ forms as a corrosion product.

• 전기학회논문지
• /
• 제67권6호
• /
• pp.789-793
• /
• 2018

All transparent metal oxide photoelectric device based on $V_2O_5$ was fabricated with structure of $V_2O_5/ZnO/ITO$ by magnetron sputtering system. $V_2O_5$ was deposited by reactive sputtering system with 4 inch vanadium target (purity 99.99%). In order to achieve p-n junction, p-type $V_2O_5$ was deposited onto the n-type ZnO layer. The ITO (indium tin oxide) was applied as the electron transporting layer for effective collection of the photo-induced electrons. Electrical and optical properties were analyzed. The Mott-Schottky analysis was applied to investigate the energy band diagram through the metal oxide layers. The $V_2O_5/ZnO/ITO$ photoelectric device has a rectifying ratio of 99.25 and photoresponse ratios of 1.6, 4.88 and 2.68 under different wavelength light illumination of 455 nm, 560 nm and 740 nm. Superior optical properties were realized with the high transmittance of average 70 % for visible light range. Transparent $V_2O_5$ layer absorbs the short wavelength light efficiently while passing the visible light. This research may provide a route for all-transparent photoelectric devices based on the adoption of the emerging p-type $V_2O_5$ metal oxide layer.

• 열처리공학회지
• /
• 제29권5호
• /
• pp.216-219
• /
• 2016

$SnO_2$ single layer films (100 nm thick) and 2 nm thick Ni intermediated $SnO_2$ films were deposited on glass substrate by RF and DC magnetron sputtering without intentional substrate heating and then the influence of the Ni interlayer on the electrical and optical properties of the films were investigated. As deposited $SnO_2$ single layer films show the optical transmittance of 82.6% in the visible wavelength region and a resistivity of $6.6{ \times}10^{-3}{\Omega}cm$, while $SnO_2/Ni/SnO_2$ trilayer films show a lower resistivity of $2.7{ \times}10^{-3}{\Omega}cm$ and an optical transmittance of 76.3% in this study. Based on the figure of merit, it can be concluded that the intermediate Ni thin film effectively enhances the opto-electrical performance of $SnO_2$ films for use as transparent conducting oxides in flexible display applications.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.979-986
• /
• 2003

Sintering behavior and electrical properties of CeO$_2$ system were investigated as a function of the amount of Gd:$_2$O$_3$, and Sm$_2$O$_3$, addition. Doped CeO$_2$ consisted of a homogeneous solid solution of the cubic fluorite structure within the amount of addition from 0 mol% to 15 mol%. Grain growth rate of Gd$_2$O$_3$-doped CeO$_2$ was much smaller than that of pure CeO$_2$, while densification rate was considerably larger. Thus doped CeO$_2$ showed a higher density than pure CeO$_2$. The electrical conductivity of Ce$_1$-$_{x}$Sm$_{x}$O$_1$-$_{x}$/2 was increased up to x = 0.2. However, with further increasing dopant concentrations, the magnitude of the conductivity was found to decrease remarkably. The ionic conductivity value obtained at $700^{\circ}C$ for 10 mol% Sm$_2$O$_3$-doped CeO$_2$ electrolyte was 4.6${\times}$10$^{-2}$ S$.$$cm^{-1}$ /.EX> /.