• Journal of Korean Society of Transportation
• /
• v.32 no.4
• /
• pp.347-356
• /
• 2014

Passenger cars occupy about 74% among registered vehicles in Korea and the ratio of transportation mode sharing is approximately 60% in the passenger transport part. However, there is no statistics related to travel characteristics of passenger cars, and official statistics are estimated from O/D travel data. Thus, National Transportation DataBase Center in KOTI has attempted to construct various statistical data through Korea Vehicle Use Survey. Based on these data, Analysis of Variance (ANOVA) was conducted to investigate the differences in travel characteristics of each analysis group. As a result, all of the explanatory variables(weekday vs. weekend, metropolitan area vs. non-metropolitan area, male vs. female, commute time vs. other time, routine purpose vs. non-routine purpose) were found to be different across households. In addition, travel distances per trip of weekday, metropolitan area, male, commute time, and non-routine purpose are longer than the opposite variables. Also, the trip distances of small size(1 to 2 persons) households are shorter compared to large size(more than 5 persons) households.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.7-17
• /
• 2005

Transportation is from an individual mobility. Various efforts to propose specific values or the individual mobility have been conducted in diverse transportation environment. However, mobility studies for multimodal public transportation are rare especially on not the range of line but area. This study propose a method to calculate transit mobility indices as expanding mobility analysis from point-to-point to area-to-area, considering access time to transit facility, running time and transfer time of passengers. To extract mobility indices, we included walking as a lowest category of mode and set passenger car as a competitive mode to transit mode. This study propose three public transportation mobility indices as 1) how competitive public transportation facility is offered against passenger car 2) how convenient transit mode including walking is provided against passenger car from origin to destination and 3) how many various paths are presented to support passenger's travel between regions. These indices are tested on the Seoul metropolitan area with 10 lines of urban rail and about 420 lines of bus. In addition, we proposed two political applications of proposed mobility indices to increase public transportation mobility between two regions and to maximize the mobility of study area when a line is added in the area.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.18-24
• /
• 2003

Vehicle emission is one of the major sources of air pollution, and provides some undesirable effects on the atmospheric environment and human health. In this study, the driving data were recorded during road tests in Seoul metropolitan wet and analyzed by statistical techniques. The objective of the study is to analyze the driving Patterns of passenger car that influence on emissions in urban driving. The results show that the average speed is around 29.2 km/h, and the average fuel economy is 10.23 km/$\ell$. The vehicle speed of Seoul metropolitan area is slower, and the stop-and-go operation is more frequent than CVS-75 test mode which is used far emission and fuel economy test.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.67-83
• /
• 2018

This research is motivated by the question, "Where, when, and through what mode does an individual passenger moving within a subway station use to travel from starting to final destinations ?" To answer this, the stations passed by the individual passenger, the path taken, and modes used need to be known beforehand. In the metropolitan integrated public transportation fare system, Automated Fare Collection System(AFC) can be a source of information on transit modes, stations, and paths of individual passengers. AFC calculates a fare for the passenger based on travel data such as boarding and alighting stations, time, and mode used. In this research, an Selected Station Analysis(SSA) method, in which AFC data is used to observe passenger movement in the metropolitan public transportation subway station from the perspective of subway transfer stations, is proposed. SSA subdivides individual passenger movement in transfer stations and analyzes initial station/time and final destination station/time information using the trip chain perspective.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.448-454
• /
• 2010

Currently a KTX train of 20-car formation is 388m long and carries 931 passengers including one captain and three crews which is quite a few to cover the lengthy service area and many customers. On the other hand, if a passenger wants to talk to an attendant, he has to wait for an attendant passing by his/her seat or walk to an intercom which is placed at every other car. Any of these choices is inconvenient. So, in this paper, we presented a system design for developing an audio/visual communication system for a passenger and an attendant. The system was analyzed and designed according to the Object-Oriented methodology with UML (Unified Modeling Language). Based on a problem statement, a Use-case Diagram, Sequence Diagrams, Class Diagram, State Charts, collaboration Diagram were generated. The design will be used in system implementation to a HEMU-400X test train and to be tested.

• Korean Institute of Interior Design Journal
• /
• v.26 no.3
• /
• pp.101-112
• /
• 2017

Based on an analysis of the characteristics of "Ecute" of the East Japan Railway Company (JR East) that planned the world's first large scale commercial facilities inside a ticket gate (paid-area including waiting room and platforms), the present study proposes a brand development of commercial facilities inside aged railway stations, where only basic railway business have been provided focusing on passenger transportation, by renewing the definition of railway commercial facilities and presenting a detailed planning and the direction of the operation system. A list of practical tasks that can be carried out in academia, planning and operation / management to facilitate the revitalization of the use of commercial facilities inside railway stations are as follows: 1) the setting of a wide scope for the revitalization of railway commercial facilities around the railway station focusing on private-funded stations in addition to existing stations; a setup of the direct scope of commercial development in the practical railway operation for passengers and stations in terms of external research, and a corresponding shift in thinking in terms of internal research 2) development of under used spaces such as the transfer area (Gongdeok Seoul Wangsimri Station are first target stations where more than four subway lines intersect) 3) brand establishment through improvement strategies for image and symbolism specialized for railway stations 4) rent of suitable business stores and layout of commercial facilities by analysis of passenger move pattern 5) development of commercial facilities which can attract customers by displaying various products, as well as finding a way to develop them in to a base facility that connects to local infrastructures 6) providing advertisement and management system for continual maintenance, and 7) brand specialization through unique storytelling and design plan that stimulates sensibility. The above study results can be utilized as a starting point for design brand awareness about commercial facilities in railway stations in Korea, which can be developed further to improve station image and passenger convenience, as well as to increase the revenue of railway businesses.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.443-448
• /
• 2014

Recently, car-ferry passenger ships of navigating the coast area in the inside of our country are on an increasing trend of main engine power and the height of upper structure, which is increased to ship's speed and loading of large vehicles. The most ship with high-speed main engine is happened to excessive vibration by propeller induced excitation force on account of connecting the vibration of hull's girder and the upper structure by decreasing the shear stiffness and natural frequency for increasing the height of passenger deck. In this paper, By exchanging the propeller of alteration the number of blades, it could be keep to ship's speed and it's decreased the vibration of hull part that is located passenger deck on the upper deck, which is identified by countermeasure of protection against vibration to procure the safety ship's navigation through measuring the vibration of hull structure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.108-113
• /
• 2005

The damageability and repairability of similar platform type vehicles could be very concerned with design optimization. In all the vehicles crash tested, small size passenger vehicles were weakness in aspect of damageability and repairability. The most critical area appears to be repair cost considering that parts cost is the largest portion of total repair cost segments. Besides repair cost, attaching method of front sidemember and subframe are placed special importance for impact energy absorption and damageability and repairability. So in order to improve damageability and repairability of vehicle structure and body component of the monocoque type passenger vehicles, the end of front side member and front back beam should be designed with optimum level and to supply the end of front side member as a partial condition approx 300mm. The effectiveness of design concept on the 40% offset frontal impact characteristics of the passenger vehicle structure is investigated and summarized.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.4
• /
• pp.76-91
• /
• 2017

The Area of a domestic railway station is designed based on the 4-step traffic demand forecasting model with the average daily passenger count as one of its parameter. However, nowadays, due to increasing rate of railway station's function, the non-passengers are increasing. In order to consider those non-passengers who aren't using trains, assumed volume are added to the average daily passenger count of station to estimate the area, but the criteria being applied has no concrete basis. Therefore, this study aimed to recalculate the increasing non-passenger rate based on actual survey data of station users in any type of railway station to obtain the optimum area. Subsequently, the the design area was performed through pedestrian simulation. According to the result of the simulation, it was found that the total space of the exciting railway stations can be reduced up to 45% and will still satisfy the level of service(LOS) requirement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.105-117
• /
• 2016

Recently the passenger of railway satisfaction levels are lowered. the reason why the railway station was built without considering the increased passenger due to diversification(transfer, shopping, and etc.) of the domestic railway station infrastructure. Especially, in case of KTX Gwangju-Songjeong Station, the number of its passenger has been increased about more than three times since its opening in 2015, so that there are much inconvenience generated in the station congested with passengers. his study aims to excute using Pedestrian simulation and Design Hourly Factor concepts of Highway Engineering, in order to designing the optimum area through the passenger demand forecast for each station. For this analysis was divided into the second stage. Frist, the railway passenger was calculated by using the methodology of Design Hourly Factor that is used during road design in the aspect of traffic engineering. Second, we tried to analyze the level of service in each railway station facility through the pedestrian simulation. Analytical results show that utilizing pedestrian simulation provides verification for calculation of LOS of each railway station facility. Therefore, In the future when designing railway station of facilities will be possible to suggest the facilities area based on LOS.