• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1027-1034
• /
• 2005

IEEE802.15.4a, which is started to realize the PHY layer including high precision ranging/positioning and low data rate communication functions, requires a simple and low power consumable transceiver architecture. To satisfy this requirements, the simple noncoherent on-off keying (OOK) UWB transceiver with the parallel energy window banks (PEWB) giving high precision signal processing interface is proposed. The flexibility of the proposed system in multipath fading channel environments is acquired with the pulse and bit repetition method. To analyze the bit error rate (BER) performance of this proposed system, a noise model in receiver is derived with commonly used random variable distribution, chi-square. BER of $10^{-5}$ under the line-of-sight (LOS) residential channel is achieved with the integration time of 32 ns and signal to noise ratio (SNR) of 15.3 dB. For the non-line-of-sight (NLOS) outdoor channel, the integration time of 72 ns and SNR of 16.2 dB are needed. The integrated energy to total received energy (IRR) for the best BER performance is about $86\%$.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.253-262
• /
• 2006

In this paper, collision analysis is carried out between two FRP fishing boats. A computer simulation with finite element method is used to accomplish this objective. At first, a detailed geometric model of the boat is constructed using 3-D CAD program. The formation of a finite element from a geometric data of the boats is carried out using HYPERMESH that is the commercial software for mesh generation and post processing. Twelve collision configurations are established by combining two kinds of contact angle($90^{\circ},\;135^{\circ}$) and three different speed(5, 10, 15knot) for small and large boats. Collision analysis is accomplished using DYNA3D. Stress distribution and deformation shape are investigated for each collision condition. In general, $90^{\circ}$ collision angle generate larger stress than $135^{\circ}$ case and the collision for two moving boats showed larger maximum stress than the case that one is moving and the other is stationary. When analysis is carried out until 150ms contact parts of two boats are broken for 10 and 15knot collision speed, in which maximum stress is larger than ultimate strength of the material.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2E
• /
• pp.91-97
• /
• 1995

This paper describes the implementation of a multi-channel audio codec for HETV. This codec has the features of the 3/2-stereo plus low frequency enhancement, downward compatibility with the smaller number of channels, backward compatibility with the existing 2/0-stereo system(MPEG-1 audio), and multilingual capability. The encoder of this codec consists of 6-channel analog audio input part with the sampling rate of 48 kHz, 4-channel digital audio input part and three TMS320C40 /DSPs. The encoder implements multi-channel audio compression using a human perceptual psychoacoustic model, and has the bit rate reduction to 384 kbit/s without impairment of subjective quality. The decoder consists of 6-channel analog audio output part, 4-channel digital audio output part, and two TMS320C40 DSPs for a decoding procedure. The decoder analyzes the bit stream received with bit rate of 384 kbit/s from the encoder and reproduces the multi-channel audio signals for analog and digital outputs. The multi-processing of this audio codec using multiple DSPs is ensured by high speed transfer of date between DSPs through coordinating communication port activities with DMA coprocessors. Finally, some technical considerations are suggested to realize the problem of real-time operation, which are found out through the implementation of this codec using the MPEG-2 layer II sudio coding algorithm and the use of the hardware architecture with commercial multiple DSPs.

• Journal of Wetlands Research
• /
• v.16 no.2
• /
• pp.213-220
• /
• 2014

Recently, river maintenance is change due to concern for the environment increases. Thus, the river restoration and river environment is best part of river maintenance. In case of Korea, existing river is improvement straightly for flood control and transportation. When the stream channel is straightly, maintain stability is important. Thus, construction of levees along the river. The various river structures for the purpose of flood control and transportation are inhibit factors of longitudinal and lateral connectivity. Connectivity is defined as the maintenance of lateral, longitudinal, and vertical pathways for biological, hydrological, and physical processes. Long-term point of view, increased connectivity is very important for a healthy ecosystem composition. As the first step of river restoration, this study described theory and concept of river continuum and the numerical model was applied to a real topography to simulate the flow analysis with or without segregated and blocked space in the Mankyung river. The results of this study can be utilized to develop the watershed connectivity assessments methods in order to the river restoration.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.33-42
• /
• 2013

This study which are recognized that the lack of empirical research about the efficiency of the elements of environmentally friendly housing development planned presented housing design elements and policies to revitalize for the reduction of greenhouse gas emissions by analyzing the effectiveness of reduction of greenhouse gas output. In addition, it used various models of DEA which are accepted until now effective technique to evaluate the performance of the organization. In conclusion, there are effective 5 regionals which are Seoul, Incheon, Ulsan, South Chungcheong Province, South Gyeongsang Province. other regionals was analyzed to be inefficient. The conclusion from this study are as follows: First, in case of 11 regionals which are analyzed to be inefficient, they have to difference plan elements to make up. So each region should establish strategy to complement vulnerability. Second, not only internal architectural factors but institutional, and external environmental factors also affect the reduction of greenhouse gas emissions. And weighted scores also were moderately high. But levels of weighted scores still less than the ratio of Good quality housing. So it can be determined that evaluation of individual architecture still considered important. It need to pay more attention to the operating system and the external environmental factors.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.3
• /
• pp.117-128
• /
• 2003

The purpose of this study is to analyze the characteristics of the landscape type on Chunchon by CG(computer graphics) pictures and visibility analysis. The land use CG picture and the land cover CG picture are created by using Zoning area data and DEM(digital elevation model), and by using data of land cover classification and DEM. According to the analysis result of the land cover from 1989 to 2000, the city area has increased to $7.7km^2$, the green area has diminished to $12.7km^2$. The tendency of the city area increases and the green area decreases which appear in the city area, developmental restriction zone and green area on land use. The landscape is classified into three types by cluster analysis using the area rate of the element which constitutes the land use CG picture. Type 1 is a landscape characteristics of developmental restriction zone. Type 2 is a landscape characteristics of green land and type 3 is a landscape characteristics based on city area and water area. The increase of city area and decrease of green area are shown in all landscape types of land cover CG pictures. The same tendency is seen in the place where the scenery is of high importance as a result of visible analysis. The preservation and management of the scenery to the green area are requird in developmental restriction zone are required.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.54-63
• /
• 2006

This work proposes a 14b 100MS/s 0.18um CMOS ADC with optimized resolution, conversion speed, die area, and power dissipation to obtain the performance required in the fourth-generation mobile communication systems. The 3-stage pipeline ADC, whose optimized architecture is analyzed and verified with behavioral model simulations, employs a wide-band low-noise SHA to achieve a 14b level ENOB at the Nyquist input frequency, 3-D fully symmetric layout techniques to minimize capacitor mismatch in two MDACs, and a back-end 6b flash ADC based on open-loop offset sampling and interpolation to obtain 6b accuracy and small chip area at 100MS/s. The prototype ADC implemented in a 0.18um CMOS process shows the measured DNL and INL of maximum 1.03LSB and 5.47LSB, respectively. The ADC demonstrates a maximum SNDR and SFDR of 59dB and 72dB, respectively, and a power consumption of 145mW at 100MS/s and 1.8V. The occupied active die area is $3.4mm^2$.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.28-34
• /
• 2012

Various feature extraction algorithms are widely applied to real-time image processing applications for extracting significant features from images. Feature extraction algorithms are mostly combined with image processing algorithms mostly for image tracking and recognition. Feature extraction function is used to supply feature information to the other image processing algorithms and it is mainly implemented in a preprocessing stage. Nowadays, image processing applications are faced with embedded system implementation for a real-time processing. In order to satisfy this requirement, it is necessary to reduce execution time so as to improve the performance. Reducing the time for executing a feature extraction function dose not only extend the execution time for the other image processing algorithms, but it also helps satisfy a real-time requirement. This paper explains FAST (Feature from Accelerated Segment Test algorithm) of E. Rosten and presents FPGA-based embedded hardware accelerator architecture. The proposed acceleration scheme can be implemented by using approximately 2,217 Flip Flops, 5,034 LUTs, 2,833 Slices, and 18 Block RAMs in the Xilinx Vertex IV FPGA. In the Modelsim - based simulation result, the proposed hardware accelerator takes 3.06 ms to extract 954 features from a image with $640{\times}480$ pixels and this result shows the cost effectiveness of the propose scheme.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.78-88
• /
• 2016

Recently BIM technology has been expanded for using in construction project. However its spread has been delayed than the initial expectations, due to the high-cost of BIM infrastructure development, the lack of regulations, the lack of process and so forth. In design phase, especially, collaboration based on BIM system has being a key factor for successful next generation building project. Through the analysis of current research trend about IT technologies, virtualization and BIM service, data exchange such as drawing, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. In various industrial fields, cloud computing technology is utilized as a promising solution which can reduce time and cost of hardware infrastructure. Among the cloud computing technology, VDI is receiving a great deal of attention from it market as an essential part cloud computing. VDI enables to host multiple individual virtual machines by using hypervisor. It has an advantage to easy main device management. Therefore, this study implements a step-by-step user's DaaS by analyzing the desktop resource data of the workers from Pre-design phase to Schematic design, Design develop and Construction design phase. It also develops BIM environment based on test of BIM modeler and designers in architectural design firm. The goal of the study is to enable the cloud computing BIM server. It provides cost saving, high-performance quality of working environment and cooperation's convenience and high security when doing BIM work in small and medium sized architectural design firm.

• Proceedings of the CALSEC Conference
• /
• 1999.07a
• /
• pp.41-50
• /
• 1999

최근의 CALS 시스템 구축 가속화 및 전자상거래 활성화 분위기는 정보기술의 전략적 활용의 초점을 개별기업 위주에서 기업간 협력체제 구축과 이를 바탕으로 하는 기업간 전자적 결합(Electronic Integration)으로 옮기고 있다. 우리는 정보기술의 공유를 기반으로 새로운 기업간의 관계를 구축할 수 있으며, 이러한 관계를 전략적으로 활용함으로써 기존 사업에서의 경쟁우위 뿐만 아니라, 새로운 사업기회를 창출할 수 있다. 관련기업간의 데이터 표준화를 통한 정보의 공유는 CALS 시스템 구축의 바탕이 된다고 할 수 있는데, 정보공유의 범위는 산업별 특성과 제품별 특성에 따라 달라질 수밖에 없으며, 관련기업간의 교섭력(Bargaining Power)에 의해서도 영향을 받게된다. CALS 환경에서는 개별기업의 정보전략에 따라 수직적 협력관계에 있는 기업들간의 정보공유 정도와 수평적 협력관계에 있는 기업들간의 정보공유 정도가 결정된다고 할 수 있다. 정보공유의 범위를 설정하는 데에는 기업간에 이루어지는 업무의 성격, 공급-제조-유통으로 연결되는 관련기업간의 구조 등도 크게 영향을 미치는 것으로 파악되고 있다. 이 연구에서는 CALS 시스템 구축과정에서 우리가 고려할 수 있는 정보공유의 범위를 관련업무공유, 시스템공유, 부품 설비공유, 시설공유 등의 관점에서 분석하여 봄으로써, 각 산업별로 진행되고 있는 시범사업들의 시스템 영역의 범위를 재조명해보고자 한다. 이 연구에서 집중적으로 다루게 될 정보공유의 범위에 대한 내용은 CALS 시스템을 개발하려는 기업들의 응용서비스 개발 및 정보전략 구축에 중요한 공헌을 할 수 있을 것으로 기대된다.진" 사업에 대한 표준 설정을 위하여 노스캐롤라이나주 지방보건소의 "보건교육/건강증진" 표준체제를 예로 들었다. 다음으로, 경제적인 효율면에서 볼 때 "보건교육/건강증진" 사업에는 단기 혹은 장기 투자가치가 있는가 하는 것이다. 새로 태어나는 미국 지방 보건소의 "보건교육/건강증진" 활동은 지역 시민 및 그 단체가 광범위하고도 자연 다발적으로 참여할 때만 성공할 수 있다고 결론 지울 수 있다.한 분야별 전문가시스템 개발을 지양하고 MCRDR이론을 기반으로 한 범용성 있는 전문가시스템 개발 툴의 개발에 관한 연구를 소개한다. 후 새로운 지식을 얻는 반복적인 Explanation-based Data Mining Architecture를 제시하였다. 본 연구의 의의로는 데이타 마이닝을 통한 귀납적 지식생성에 있어 귀납적 오류의 발생을 고메인 지식을 통해 설명가능 함을 보임으로 검증하고 아울러 이러한 설명을 통해 연역적으로 새로운 가설지식을 생성시켜 이를 가설검증방식으로 검증함으로써 귀납적 접근과 연역적 접근의 통합 데이타 마이닝 접근을 제시하였다는데 있다.gical learning to give information necessary to improve the making. program and policy decision making, The objectives of the study are to develop the methodology of modeling the socioeconomic evaluation, and build up the practical socioeconomic evaluation model of the HAN projec