• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.23 no.3
• /
• pp.253-266
• /
• 2019

In this article, a systematic solution based on the sequence of expansion method is planned to solve the time-fractional diffusion equation, time-fractional telegraphic equation and time-fractional wave equation in three dimensions using a current and valid approximate method, namely the ADM, VIM, and the NIM subject to the estimate initial condition. By using these three methods it is likely to find the exact solutions or a nearby approximate solution of fractional partial differential equations. The exactness, efficiency, and convergence of the method are demonstrated through the three numerical examples.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1170-1175
• /
• 2009

When managers estimate exact construction cost at early stage and design phase, they can reduce construction cost in a more efficient way than to predict at construction stage. But, the current of public construction cost estimation and management is concentrated almost after detailed design phase. Therefore, construction cost management in design development phase to generally use approximate estimating is not correct. Also, the existing construction cost used the method that estimated by gross floor area-based cost estimates at design development phase. So, it is difficult to show the specific amount of materials and basis about the estimated cost of the construction. This study derived problems and limits of construction management at design development phase in case of public office building project through review of literature and current survey, and suggested estimating process model process of structural construction cost go improve these matters.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.604-605
• /
• 2015

To secure quality of dam construction needs appropriate construction duration. Tight construction schedule may have negative influence on infrastructure quality, work safety and maintenance cost. It is necessary to reflect proper construction duration in the planning phase. There have been standards for estimating construction duration of building and industrial complex development but dam construction have not. In order to estimate construction duration of CFRD, feasible study reports and design reports were analyzed to acquire available information. After that, considering on construction duration methods such as comparison with similar cases, approximate estimating formula, approximate quantity assumption were adapted to Critical Path items. Hence, this study present framework for construction duration estimating of CFRD in the planning phase. This framework can be applied other types of dam along the same line.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.677-684
• /
• 2008

The paper provides an approximate cost estimating model that can be used for tunnel. Based on the previous study analyzed critical factors that have impact on tunnel construction cost, this paper establishes a cost variance index table that reflects the cost impacts due to the change of the critical cost factors. An estimating procedure is described utilizing the index table. For the verification of the suggested model, the comparison of the estimated construction cost with real project cost is performed. The estimated results range from 95%~111% of the real project costs. As an approximate tunnel cost estimating model, the model can be utilized to quickly estimate tunnel construction costs based on the conceptual information at the planning stage and to efficiently make a decision on design alternatives.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.97-107
• /
• 2015

An analytical model was developed to estimate the viscous and squeeze-film damping ratios of heat exchanger tubes subjected to a two-phase cross-flow. Damping information is required to analyze the flow-induced vibration problem for heat exchange tubes. In heat exchange tubes, the most important energy dissipation mechanisms are related to the dynamic interaction between structures such as the tube and support and the liquid. The present model was formulated considering the added mass coefficient, based on an approximate model by Sim (1997). An approximate analytical method was developed to estimate the hydrodynamic forces acting on an oscillating inner cylinder with a concentric annulus. The forces, including the damping force, were calculated using two models developed for relatively high and low oscillatory Reynolds numbers, respectively. The equivalent diameters for the tube bundles and tube support, and the penetration depth, are important parameters to calculate the viscous damping force acting on tube bundles and the squeeze-film damping forces on the tube support, respectively. To calculate the void fraction of a two-phase flow, a homogeneous model was used. To verify the present model, the analytical results were compared to the results given by existing theories. It was found that the present model was applicable to estimate the viscous damping ratio and squeeze-film damping ratio.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.2
• /
• pp.31-44
• /
• 1997

This paper presents an approximate analytical model to estimate the mean packet walting times at the stations in the IEEE 802, 6 subnetwork of a metropolitan area network. Each station is modeled as a two queue single server system, which serves data packets and requests from downstream stations according to the DQDB protocol. The model estimates the mean waiting time of the requests and in turn, using the discrete time work conservation law, estimates the mean waiting time for packets. Simulation experiments shows that the model accurately works even under very high traffic loads.

• Communications for Statistical Applications and Methods
• /
• v.16 no.3
• /
• pp.541-547
• /
• 2009

We consider distribution, reliability and moment of ratio in two independent beta random variables X and Y, and reliability and $K^{th}$ moment of ratio are represented by a mathematical generalized hypergeometric function. We introduce an approximate maximum likelihood estimate(AML) of reliability and right-tail probability in the beta distribution.

• 한국해양학회지
• /
• v.15 no.1
• /
• pp.1-7
• /
• 1980

The results of measurements of shear current induced in water by wind in wind wave tunnel are presented briefly. The shear current distributions are found to fit reasonably well an exponentiall form. This form was used to estimate surface velocity and boundary layer thickness used in stability analysis. An analysis of hydrodynamic stability of the shear current was carried out, using a broken line as an approximate profile, to see the stability as a possible mechanism of wind wave generation. Comparison between experimental results and theoretical ones shows that there exists a large discrepancy particularly in phase velocity and hydrodynamic instability of the shear current seems not to be the basic mechanism of wind wave generation.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.92-101
• /
• 2006

In this paper a adaptive backstepping control scheme is proposed for control of a do motor driving a one-link manipulator. Fuzzy logic systems are used to approximate the unknown nonlinear function including the parametric uncertainty and disturbance throughout the entire electromechanical system. A compensation controller is also proposed to estimate the bound of approximation error. Thus the asymptotic stability of the closed-loop control system can be obtained. Numerical simulations are included to show the effectiveness of the proposed controller.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.175-176
• /
• 2018

This paper presents a method to estimate the parameter of permanent magnet synchronous motor using a least squares method. The approximate solution of the linear simultaneous equations is obtained by the pseudoinverse least squares method of the input current and output voltage data of the current controller. It is possible to obtain the current response of the same bandwidth to the general control target by using the Pole-zero Cancellation technique. This paper verifies the performance of the proposed method by comparing the results of estimation of parameters of different motors by simulation.