• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.112-120
• /
• 2019

Benzene is a class 4 hazardous material according to the Act on the Safety Control of Hazardous Substances. This study qualitatively evaluated the damage size of a "toxic" accident and "pool fire" accidents based on benzene in a virtual scenario of a fire and leakage accident during unloading at a port facility. The KORA program was used as an evaluation method, which is supported as a universal program by the National Institute of Chemical Safety. The range of damage effects of a benzene-induced fire and leakage accident was predicted. In the case of toxic damage range, the accident's damage effect range for the "worst case scenario" was reduced by up to 5.11% with a decrease in the size of the leakage hole. In the case of the leakage time, the damage effect range increased to 145.12% with a 10 min leakage time compared to that of a 5 min leakage time and went up to 20 min (212.29%) with a 20 min leakage time. In the case of pool-fire-induced damage, the damage effect range by radiant heat in the "worst case scenario" was 228.8 m in radius from the center of the handling facility. In the "alternative scenario," the damage effect range by radiant heat was reduced by up to 8.26% compared to that in the "worst case scenario" since the size of the leakage hole was decreased by reducing the cross-sectional area of the pipe.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.1
• /
• pp.45-51
• /
• 2015

PBDEs (polybrominated diphenyl ehters) are rarely dissolved in water due to their strong hydrophobicity and large molecular mass so not many researches were done in aqueous environment compared to other environmental compartments. However, the mass loading from wastewater treatment plant into aquatic environment, re-suspension from bottom sediment and partitioning from floating particles and colloids may not be negligible. It is, therefore, important but also difficult to investigate PBDEs in water environment. Recent overcoming resolution towards this barrier to monitor hydrophobic organic compounds in aquatic environment is using passive sampling technique like semipermeable membrane device. By using passive sampling, it might be possible to obtain long-term reproducible monitoring result and detect the trace amounts of PBDEs, with controlling fluctuation of surrounding environmental factors during the sampling event. So therefore, this study is purposed to confirm the possibility of using SPMD (semi-permeable membrane device) as water monitoring tool. Grab samples, composite samples and SPMDs were applied in river bank to evaluate the concentration difference and temporal fluctuation by various water sampling method, and to assess the water concentration prediction capability of SPMD for the PBDEs.

• Sleep Medicine and Psychophysiology
• /
• v.6 no.1
• /
• pp.46-51
• /
• 1999

Objectives: Patients with premenstrual dysphoric disorder(or PMDD) have impairments of the social, occupational or academic function due to psychological or somatic symptoms, which have the characteristic pattern of symptom exacerbation in the week before menses begin and remission shortly after the onset of menses. In the chronobiological view, many researchers have assumed that the etiology of PMDD is the advanced circadian rhythm. It has been suggested that light has a therapeutic effect on PMDD, because evening light results in phase delay of circadian rhythm through the biochemical changes including melatonin. Methods: The authors investigated the therapeutic effect of light therapy on four patients with prospectively diagnosed PMDD by DSM-IV criteria using clinical psychiatric interview, Premenstrual Assessment Form(PAF) and Daily Rating Form(or DRF). In the evening(6:30pm-8:00pm), the 2,500 lux light administered for seven consecutive days during the symptomatic late luteal phase of menstrual cycle. Beck Depression Inventory(or BDI), Hamilton Rating Scale for Depression(or HAM-D), Spielberg State Anxiety Inventory(or SA), and DRF were evaluated before and after seven days of light therapy. Results: Premenstrual symptoms of PMDD could be effectively treated with the evening bright light therapy, especially in PMDD patients with atypical symptoms. In addition, the light therapy seemed to more effective on the psychologic symptoms than the somatic symptoms of PMDD. There was no significant side-effect of light therapy, except the transient and mild eye-strain in one case. Conclusions: In spite of the results of limited data from our clinical trial, the authors suggest that the potential use of light therapy as an alternative to the pharmacological management of patients with PMDD.

• Resources Recycling
• /
• v.24 no.6
• /
• pp.69-77
• /
• 2015

Heap bioleaching for detoxification of mine tailings is a promising technology; however, long-term studies that aim to understand the potential of this process are scarce. Therefore, this study assesses the feasibility of column bioleaching as an alternative technology for treatment of mine tailings with high concentrations of arsenic during a long-term experiment (436 days). To accomplish this objective, we designed a 350-mm plastic column that was packed with 750 g of mine tailings and inoculated with an acidophilic bacterial culture composed of A. thiooxidans and A. ferrooxidans. Redox potential, pH, ferric ion generation, and arsenic concentration of the off-solution were continuously monitored to determine the efficiency of the technology. After 436 days, we obtained up to 70% arsenic removal. However, several drops in removal rates were observed during the process; this was attributed to the harmful effect of arsenic on the bacteria consortium. We expect that this article will serve as a technical note for further studies on heap bioleaching of mine tailings.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.1
• /
• pp.31-38
• /
• 2013

To substitute animal test, skin equivalents (SEs) have been developed for skin irritation and corrosion test. Recently, we have developed new SEs containing Cervi cornus Colla (CCC). In the present study, we used the SEs for cutaneous cytotoxicity test. Sodium dodecylsulfate (SDS) or sodium carbonate was applied to the SEs-, and the epidermal damage by H&E and immunohistochemical stains was evaluated. Our results showed that SDS or sodium carbonate affected the epidermal part of SEs containing CCC in a dose-dependent manner and decreased the expression of p63. It is concluded that SEs containing CCC could be used for an alternative model of animal test and would be greatly helpful in the development of in vitro irritation and corrosion test.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.2
• /
• pp.107-116
• /
• 2020

Up to date, the majority research on the major landscape elements in organic farming has been mainly focused on the practice of seeking efficiency. The problem is that this type of study contributes to polluting the agricultural environment and damaging the ecological circulation system. As an alternative, there is a growing body of research on organic farming, but it is not widely applied that research on how to manage the landscape considering the scenic characteristics of farming villages practicing organic farming. Therefore, this study was carried out in the conservative aspects of rural landscapes in order to effectively manage the landscape of organic agriculture and, intended to be used to maintain and preserve natural and ecologically harmonious landscapes by deriving management methods suitable for landscape elements targeting the major landscape elements of the organic farming complex. To carry out, this study performed the experts survey which is composed of 13 major landscape elements, including rice paddies and fields, monoculture and diverse crops, dirt roads, windbreak trees, accent planting, dum-bung(small pond), natural small river, natural waterways, plastic film houses, one-storied houses, and pavilion. As a result, Farm land was formed in a square shape, concentrated in an independent space, planted companion plants around the crop, and covered with plants to manage the borders. As for the surrounding environment, it was analyzed that the aspart road system circulating through the village, the evergreen broad-leaved windbreak forest around the cultivated land, and the accent plant located at the entrance of the village were suitable. The hydrological environment consists of Round small pond made of stone in an open space, natural rivers around the village, and natural channels around the farmland, and The Major facilities are suitable for greenhouses that are shielded by plants in independent regions, and wooden duck houses located inside the cultivation area are suitable and The settlement facilities were analyzed to be suitable for single-story brick houses located in independent residential areas, pavilion located with greenery in the center of the village, and educational spaces shielded with wood from arable land. If supplementary evaluation criteria suitable for the management of organic farming landscape are additionally supplemented based on the results derived from this study, It is expected to enhance the landscape value of ecologically superior organic farming.

• Korean Journal of Remote Sensing
• /
• v.31 no.6
• /
• pp.523-530
• /
• 2015

A Multiple Regression Method (MRM) is used for the first time with Ozone Monitoring Instrument (OMI) and Moderate Resolution Imaging Spectroradiometer (MODIS) data to estimate formaldehyde (HCHO) Vertical Column Density (VCD). For a 3.5-year period from January 2005 through July 2008, HCHO VCD estimation is investigated in cities over Asia in two categorized areas: (1) Major cities in Northeast Asia (Beijing, Seoul, and Tokyo), (2) Major cities in Southeast Asia (New Delhi, Dhaka, and Bangkok). In the Major cities in Northeast Asia, there are good agreements between HCHO estimated by the multiple linear regression method ($HCHO_{MRM}$) and HCHO measured by OMI ($HCHO_{OMI}$) (0.78 < $R^2$ < 0.82). However, in Major cities in Southeast Asia, there were poor agreements between $HCHO_{OMI}$ and $HCHO_{MRM}$ (0.24 < $R^2$ < 0.39). In addition, an unbiased assessment of the MRM performance using modeling and validation groups shows that the performance of the MRM based on separate modeling and validation groups is comparable to that using all the data for deriving Multiple Regression Equations (MREs). This study demonstrates that MRM can be an alternative tool for HCHO estimation in certain areas over Asia.

• Journal of Biomedical Engineering Research
• /
• v.27 no.5
• /
• pp.210-217
• /
• 2006

Many types of interspinous distraction devices (IDDs) have been recently developed as an alternative surgical treatment to laminectomy and fusion with pedicle screws for the treatment of the lumbar spinal stenosis (LSS). They are intended to keep the lumbar spine in a slightly flexed posture to relieve pain caused by narrowing of the spinal canal and vertebral foramen. However, their biomechanical efficacies are not well known. In this study, we evaluated the kinematic behaviors and changes in intradiscal pressure (IDP) of the porcine lumbar spine implanted with IDD. For kinematics analysis, five porcine lumbar spines (L2-L6) were used and the IDD was inserted at L4-L5. Three markers (${\phi}{\le}0.8mm$) were attached on each vertebra to define a rigid body motion for stereophotogrammetric assessment of the spinal motion in 3-D. A moment of 7.5Nm in flexion-extension, lateral bending, and axial rotation were imparted with a compressive force of 700N. Then, IDD was implanted at L3-L4. IDPs were measured using pressure transducer under compression (700N) and additional extension moment (700N+7.5Nm). In kinematic behaviors, insertion of IDD resulted in statistically significant decrease 42.8% at the implanted level in extension. There were considerable changes in ROM at the adjacent levels, but statistically insignificant. In other motions, there were no significant changes in ROM as well regardless of levels. IDPs at the surgical level (L3-L4) under compression and extension moment decreased by 12.9% and 18.8% respectively after surgery (p<0.05). At the superiorly adjacent levels, IDPs increased by 19.4% and 12.9% under compression and extension, respectively (p<0.05). Corresponding changes at the inferiorly adjacent levels were 29.4% and 6.9%, but they were statistically insignificant (p>0.05). The magnitude of pressure changes due to IDD, both at the operated and adjacent levels, were far less than the previously reported values with conventional fusion techniques. Our experimental results demonstrated the IDDs can be very effective in limiting the extension motion that may cause narrowing of the spinal canal and vertebral foramens while maintaining kinematic behaviors and disc pressures at the adjacent levels.

• Journal of Legislation Research
• /
• no.44
• /
• pp.63-101
• /
• 2013

This article firstly explores into the concepts, components, and pictures of institutional realization of competition and diversity respectively on the premise that competition and diversity comprise the primary objectives to be pursued by the broadcasting-related laws which provide the concrete measures of media policy, and argues that while the competition objective has differentiation factors, there are also particularities in the diversity value in the broadcasting-related laws as sector-specific competition laws. Then assuming that special competition rules including structural regulatory measures particularly in the broadcasting market are required in order to realize values of competition and diversity harmoniously, this article suggests the following improvement directions for regulations aimed at protection of competition and diversity in the broadcasting-related laws. The first one is with the improvement method for regulations aimed at protection of competition. Regulation on share of audience as an ex ante regulation of status and regulation on prohibited activities as an ex post regulation of conduct may play important roles in substituting the causative regulation while seeking for diversity value. For this purpose, it is needed to develop a concrete method that incorporates diversity-related factors as consideration factors in the standard for determining illegality of prohibited activities by inference to methods of determining illegality in the competition law. The second one is with the improvement method for regulations aimed at protection of diversity. This could be considered from three viewpoints that are the setting of regulatory objectives, the identification of alternative regulatory measures, and the choice of regulatory measures and levels suitable for regulatory objectives. From these viewpoints, the regulatory framework should be improved mainly with institutional measures in which diversity value is used for tools of assessment and analysis, not just remaining as mere rhetorical devices, and whether or to what extent to maintain regulations seemingly unreasonable in terms of harmonization with economic objectives such as competition should be discreetly reviewed.

• Structural Engineering and Mechanics
• /
• v.50 no.5
• /
• pp.589-603
• /
• 2014

Expressions for determining the value of the impact force as reported in the literature and incorporated into code provisions are essentially quasi-static forces for emulating deflection. Quasi-static forces are not to be confused with contact force which is generated in the vicinity of the point of contact between the impactor and target, and contact force is responsible for damage featuring perforation and denting. The distinction between the two types of forces in the context of impact actions is not widely understood and few guidelines have been developed for their estimation. The value of the contact force can be many times higher than that of the quasi-static force and lasts for a matter of a few milli-seconds whereas the deflection of the target can evolve over a much longer time span. The stiffer the impactor the shorter the period of time to deliver the impulsive action onto the target and consequently the higher the peak value of the contact force. This phenomenon is not taken into account by any contemporary codified method of modelling impact actions which are mostly based on the considerations of momentum and energy principles. Computer software such as LS-DYNA has the capability of predicting contact force but the dynamic stiffness parameters of the impactor material which is required for input into the program has not been documented for debris materials. The alternative, direct, approach for an accurate evaluation of the damage potential of an impact scenario is by physical experimentation. However, it can be difficult to extrapolate observations from laboratory testings to behaviour in real scenarios when the underlying principles have not been established. Contact force is also difficult to measure. Thus, the amount of useful information that can be retrieved from isolated impact experiments to guide design and to quantify risk is very limited. In this paper, practical methods for estimating the amount of contact force that can be generated by the impact of a fallen debris object are introduced along with the governing principles. An experimental-calibration procedure forming part of the assessment procedure has also been verified.