• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.559-566
• /
• 2008

In this paper, we propose a voice instruction-based takeoff system for aircraft including unmanned aerial vehicle (UAV). The system consists of voice recognition (VR), flight state checking and instruction (command) execution. Employing VR technology, the proposed takeoff system can provide simplified and more reliable takeoff procedures to pilots. By virtue of the VR-based system it is expected that human errors during takeoff phase can be reduced and further navigation safety can be improved.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.658-665
• /
• 2023

Take-off weight is a key factor for improving accuracy when estimating an aircraft's carbon emissions and fuel consumption. However, the takeoff weight contains sensitive payload information that can infer the airline's management strategy, making it impossible to leak it outside. Although several models for estimating takeoff weight have been presented in previous studies, the researcher points out that there are limitations of the study caused by variables at the pilot's discretion. In this paper, several variables related to takeoff weight are identified to suggest a way to control these limits. Among them, variables that can improve the accuracy of takeoff weight are selected and an estimation equation is presented by applying them to ADS-B information. The proposed estimation does not estimate the average takeoff weight but has the advantage of being able to estimate all ranges of the takeoff weight.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.11
• /
• pp.87-93
• /
• 2020

A key component of aviation safety is to eliminate the errors in commercial aircraft air data systems to ensure stable aviation operation. Although the technical aspects such as the maintenance and inspection play a pertinent role, human errors are expected to have a similar or even larger influence on the aviation safety. Aviation maintenance and inspection tasks are often performed by a complex organization, in which individuals perform a variety of tasks in an environment involving time pressure, sparse feedback, and complex conditions. These situational characteristics, combined with the general tendency of human error, may lead to various types of errors, which may have critical consequences such as accidents and loss of life. For instance, if an amber message "IAS DISAGREE" is displayed on the primary flight display while the aircraft is rolling on the runway to takeoff, the crew immediately performs a rejected takeoff operation and troubleshoots the air data system. This paper proposes alternative approaches to address the occurrence of defects due to the human factors involved in the practical processes of the air data system of commercial aircraft.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.7
• /
• pp.691-698
• /
• 2015

Inertial Navigation Systems (INS) are widely used as the main navigation device for aircraft. To get the initial attitude, the INS requires the initial alignment before navigation starts. An aircraft also needs an engine test procedure that causes some vibrations before flight. An INS can't be aligned in a vibration environment so the initial alignment is performed before the aircraft engine test. Therefore, the initial alignment time of an INS has been a major factor in limiting an aircraft's takeoff response time. In this paper, we designed an initial alignment algorithm that can be executed even in disturbances such as aircraft run-up. We demonstrated verification of the algorithm that is embedded on the real INS and testing methods to evaluate the alignment of the INS. We also analyzed the test results of the proposed initial alignment algorithm that is performed during a real aircraft run-up.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.272-280
• /
• 2022

An aircraft carrier is a combat ship that acts as an aircraft base at sea and performs combat through aircraft mounted as a military ship operating the aircraft. The Navy proposed a 40,000-ton light aircraft carrier operation plan that could be equipped with vertical takeoff and landing fighter jets and helicopters around 2033, and based on this, this study examined the operation of aircraft control equipment among the aviation support systems required for operating light aircraft carriers in Korea. PriFly, TWR's ILARTS, ILM for airspace control, ASR, PAR, LAAS or RNAV, PALS (JPALS) for access control are required as essential equipment, and communication network and SCATT-16 are required along with URN-25 TACAN, ICLS (El/Az), ACLS OLS, MOVAS, IFLOLS, etc. This study consists of two parts, and part 2 will describe a specific control method on an aircraft carrier.

• Advances in aircraft and spacecraft science
• /
• v.8 no.1
• /
• pp.17-30
• /
• 2021

This is an investigation for a more electric regional aircraft, considering the ATR 72 aircraft as an example and the electrification of its four double slotted flaps, which were estimated to require an energy of 540 Wh for takeoff and 1780 Wh for landing, with a maximum power requirement of 35.6 kW during landing. An analysis and evaluation of three energy harvesting systems has been carried out, which led to the recommendation of a combination of a piezoelectric and a thermoelectric harvesting system providing 65% and 17%, respectively, of the required energy for the actuators of the four flaps. The remaining energy may be provided by a solar energy harvesting photovoltaic system, which was calculated to have a maximum capacity of 12.8 kWh at maximum solar irradiance. It was estimated that a supercapacitor of 232 kg could provide the energy storage and power required for the four flaps, which proved to be 59% of the required weight of a lithium iron phosphate (LFP) battery while the supercapacitor also constitutes a safer option.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.1
• /
• pp.74-81
• /
• 2021

UAM(Urban Air Mobility) systems have evolved in the form of helicopters in the 1960~1970s, tiltrotors in the 1980s, small aircraft transportation systems in the 2000s, and electric-powered Vertical Take-Off and Landing (eVTOL) in the 2010s; accordingly, the early heliport has evolved to its current form of a Vertiport. Vertical Takeoff and Landing Sites, Vertiports, are important factors for the successful introduction of UAM, along with the resolution of air traffic control (ATC), air security, and noise problems. However, there are no domestic or international installation standards and guidelines yet. Therefore, in this study, installation standards were prepared by referring to domestic and international case studies, ICAO standards, and MIT research papers. The study proposes to establish standards for Final Approach and Takeoff Area (FATO) as 1.5D, 1D for Touchdown and Lift-Off Area (TLOF), and 1.5D for Safety Area (SA). It also proposes to add "UAM Vertiport Installation Standards" to the 「Act on the Promotion and Foundation of Drone Utilization, Drone Act」.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2182-2184
• /
• 2004

This paper presents a systematic and straightforward fault estimation approach for process fault detection. isolation and accommodation. The approach includes the design of a reduced-order observer and an algebraic-fault estimator. The observer is designed for an unknown input and fault-free system, which is obtained by coordinate transformations of original systems with unknown inputs and faults. The observer information is devoted to- the fault estimation for fault detection and isolation. The fault estimates can be used to form an additional control input to accommodate the fault. The suggested scheme is verified through simulation studies performed on the control of a vertical takeoff and landing (VTOL) aircraft in the vertical plane.

• Advances in aircraft and spacecraft science
• /
• v.4 no.1
• /
• pp.81-91
• /
• 2017

The performances of lifting surfaces are particularly critical in specific flight conditions like takeoff and landing. Different systems can be used to increase the lift and drag coefficients in such conditions like slat, flap or ailerons. Nevertheless they increase the losses and make difficult the mechanical design of wing structures. Morphing surfaces are a compromise between a right increase in lift and a reduction of parts movements involved in the actuation. Furthermore these systems are suitable for more than one flight condition with low inertia problems. So, flap and slats can be easily substituted by the corresponding morphing shapes. This paper deals with a genetic optimization of an airfoil with morphing flap with an already optimized nose. Indeed, two different codes are used to solve the equations, a finite volume code suitable for structured grids named ZEN and the EulerBoundary Layer Drela's code MSES. First a number of different preliminary design tests were done considering a specific set of design variables in order to restrict the design region. Then a RANS optimization with a single design point related to the take-off flight condition has been carried out in order to refine the previous design. Results are shown using the characteristic curves of the best and of the baseline reported to outline the computed performances enhancements. They reveal how the contemporary use of a morphing acting on the nose of the main component and the trailing edge of the flap drive towards a total not negligible increment in lift.

• Journal of Advanced Navigation Technology
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2015

Due to the rapid increase in air traffic worldwide, ICAO has replaced the existing navigation equipment with equipment based on satellite navigation. As a part of that work, ICAO was planning to replace conventional takeoff and landing service using ILS with GBAS. Unlike ILS, GBAS which uses precision approach service inducing aircraft to airport and satellite based augmentation system providing precise position information service surrounding airport is capable of providing a required performance by only a system, regardless of the number of systems, and has an advantage that it is possible curved approach. In this paper, fuel reduction of ILS approach procedures and GBAS curved approach procedures is estimated and determined by flight test in Taean Airport.