• 한국표면공학회지
• /
• 제41권1호
• /
• pp.23-27
• /
• 2008

The effect of solution agitation on the copper electroless deposition process of ULSI (ultra large scale integration) interconnections was investigated by using physical, electrochemical and electrical techniques. It was found that proper solution agitation was effective to obtain superconformal copper configuration within the trenches of $130{\sim}80nm$ width. The transition of open potential during electroless deposition process showed that solution agitation induced compact structure of copper deposits by suppressing mass transfer of cuprous ions toward substrate. Also, the specific resistivity of copper layers was lowered by increasing agitation speed, which made the deposited copper particles smaller. Considering both copper deposit configuration and electric property, around 500 rpm of solution agitation was the most suitable for the homogeneous electroless copper filling within the ultra-fine patterns.

• 기본간호학회지
• /
• 제26권2호
• /
• pp.136-143
• /
• 2019

Purpose: The feasibility and differential effects of two music therapy methods (interventions with preferred music vs. classical relaxation music) were done to examine the effects on agitation and anxiety in patients weaning off mechanical ventilation. Methods: This pilot study was conducted using a crossover design. Six patients listened to preferred music choices and classical relaxation music. Anxiety scores were measured using the Richmond Agitation Sedation Scale (RASS), State-Trait Anxiety Inventory (STAI), and visual analog scale (VAS). Results: Patients showed a significant decrease in agitation and anxiety after both the preferred and classical relaxation music interventions. The difference in the effects of preferred music and that of classical relaxation music was not significant. As for feasibility, patients exhibited a change in agitated behaviors after the music interventions by not trying to take off medical devices and quietly listening to the music, and by smiling and moving lips along with the lyrics while listening. Conclusion: Music interventions which centered on either patients' preferences or classical relaxation music to enhance relaxation, helped reduce agitation and anxiety during the mechanical ventilation weaning process.

• 대한간호학회지
• /
• 제54권1호
• /
• pp.32-43
• /
• 2024

Purpose: This study aimed to determine the impact of an intervention using voice recording of family members on pain, anxiety, and agitation in patients undergoing weaning from mechanical ventilation. Methods: A randomized control pre-post experimental design was implemented to 53 participants, with 27 and 26 participants in the experimental and control groups, respectively. A 70-second voice recording of a family member, repeated three times at 10-minute intervals was used as an intervention for the experimental group. Meanwhile, participants in the control group used headset for 30 minutes. Structured instruments were utilized to measure pain, anxiety, agitation, and the weaning process. Wilcoxon Signed Ranks test and the Mann-Whitney U test, or χ² test, were used for data analysis. Results: The experimental group exhibited significant decrease in pain (Z = - 3.53, p < .001), anxiety (t = 5.45, p < .001), and agitation (Z = - 2.99, p = .003) scores compared with those of the control group. However, there was no significant difference between groups in the weaning process' simplification (χ² = 0.63, p = .727). Conclusion: Intervention using family members' voice recording effectively reduces pain, anxiety, and agitation in patients undergoing weaning from mechanical ventilation. This can be actively utilized to provide a more comfortable process for patients.

• Journal of Microbiology and Biotechnology
• /
• 제21권4호
• /
• pp.430-437
• /
• 2011

The effects of the agitation and aeration rates on the production of serratiopeptidase (SRP) in a 5-L fermentor (working volume 2-l) were systematically investigated using Serratia marcescens NRRL B-23112. The dissolved oxygen concentration, pH, biomass, SRP yield, and maltose utilization were all continuously measured during the course of the fermentation runs. The efficiencies of the aeration and agitation were evaluated based on the volumetric mass transfer coefficient ($K_La$). The maximum SRP production of 11,580 EU/ml with a specific SRP productivity of 78.8 EU/g/h was obtained with an agitation of 400 rpm and aeration of 0.075 vvm, which was 58% higher than the shake-flask level. The $K_La$ for the fermentation system supporting the maximum production (400 rpm, 0.075 vvm) was 11.3 $h^{-1}$. Under these fermentor optimized conditions, kinetic modeling was performed to understand the detailed course of the fermentation process. The resulting logistic and Luedeking-Piret models provided an effective description of the SRP fermentation, where the correlation coefficients for cell growth, SRP formation, and substrate consumption were 0.99, 0.94, and 0.84, respectively, revealing a good agreement between the model-predicted and experimental results. The kinetic analysis of the batch fermentation process for the production of SRP demonstrated the SRP production to be mixed growth associated.

• Advances in environmental research
• /
• 제5권1호
• /
• pp.37-50
• /
• 2016

The main objective of this study is to evaluate adsorptive removal of Methylene Blue (MB) dye from aqueous solution using pumice powder. The effects of pH, adsorption time, agitation speed, adsorbent dose, and dye concentrations on dye adsorption were investigated. Process kinetics and isotherm model constants were determined accordingly. The results showed that adsorbent dose, dye concentration and agitation speed are the important parameters on dye adsorption and the removal of MB did not significantly change by varying pH. A total adsorption process time of 60 min was observed to be sufficient to effectively remove 50 mg/L MB concentration. The MB adsorption data obeyed both pseudo first order and second order kinetic models. Adsorption of MB by pumice fitted well both Langmiur and Freundlich isotherms ($R^2{\geq}0.9700$), except for 150 rpm agitation speed that system fitted only Langmiur isotherm. The results of this study emphasize that pumice powder can be used as a low cost and effective adsorbent for dye removal.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권6호
• /
• pp.571-575
• /
• 2005

A simple, but effective on-line method for estimating the mycelial cell mass concentration from agitation speed data, a most readily-available process variable, has been developed for DO-stat cultures of Agaricus blazei. The dynamic change of dissolved oxygen concentration (DOC) in the initial transient period and the change in yield were considered in the development of the estimation algorithm or estimator. Parameters in the estimation algorithm were calculated from the agitation speed data at 20% of DOC. The proposed estimator could accurately predict the cell mass concentration regardless of DOC levels in the tested range of $10{\sim}40%$, showing a good extrapolation capability.

• 한국항공우주학회지
• /
• 제34권3호
• /
• pp.51-59
• /
• 2006

교반기 내에서의 교반속도 변화에 따라 제조된 자가치료용 마이크로캡슐의 물리적 특성을 입도분석기와 광학현미경을 통해 실험적으로 관찰하였다. 또한 자가치료용 마이크로캡슐의 제조공정을 이해하기 위해 3차원 수치해석의 수행을 통해 교반기 내에서의 유동 특성을 조사하였다. 연구결과에 따르면, 교반기 내에서의 교반속도는 마이크로캡슐의 크기를 결정하는 주요 인자임을 확인하였다. 액체가 혼합된 교반기 내에서는 회전하는 임펠러에 의해 제트와 끝단 와류 성분이 발생하였으며 임펠러의 블레이드 주위에 형성되는 와도는 교반속도가 높아질 때 증가함을 알 수 있었다. 또한 자가치료용 마이크로캡슐의 크기는 끝단 와류와 같은 작은 크기의 혼합 패턴 유동에 큰 영향을 받았다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.169-172
• /
• 2003

Manufacturing process for autonomic microcapsules was introduced and autonomic microcapsules were manufactured by varying with various manufacturing process variables. Urea-formaldehyde resin was used for the wall of microcapsules and DCPD (dicyclopentadiene) was used for the self-healing agent. The characteristics of these microcapsules was evaluated through a particle size analyaer, an optical microscope, and a TGA. The various manufacturing process variables, such as pH and agitation speed of the emulsified solution, were considered to focus in this study. According to the results, the particle size distributions were affected on the agitation speed of the emulsified solution, and the thermal stability was influenced by pH of the emulsified solution.

• Advances in environmental research
• /
• 제1권2호
• /
• pp.153-166
• /
• 2012

Decolourization potential of white rot fungal organism, coriolus versicolor, was investigated in a batch reactor, for textile dye industry wastewater. The influence of process parameters like pH, temperature, agitation speed and dye wastewater concentration on the decolourization of textile dye wastewater was examined by using Response surface methodology (RSM). The maximum decolourization was attained at: pH- 6.8, temperature - $27.9^{\circ}C$, agitation speed - 160 rpm and dye wastewater concentration - 1:2. From the analysis of variance (ANOVA) results it was found that, the linear effect of agitation speed and dye wastewater concentration were significant for the decolourization of textile dye wastewater. At these optimized condition, the maximum decolourization and chemical oxygen demand (COD) reduction was found to be 64.4% and 79.8% respectively. Various external carbon sources were tried to enhance the decolourization of textile dye wastewater. It was observed that the addition of carbon source enhances the decolourization of textile dye wastewater. Kinetics of textile dye degradation process was studied by first order and diffusional model. From the results it was found that the degradation follows first order model with $R^2$ value of 0.9430.

• 자원리싸이클링
• /
• 제8권4호
• /
• pp.39-44
• /
• 1999

높은 유기성분을 가지고 있으나 주로 매립에 의존하고 있는 맥주폐수 슬러지와 분뇨처리슬러지의 재자원화를 위한 이들 혼합물의 퇴비화에 관한 연구를 수행하였다. 분뇨슬러지와 맥주폐수 슬러지의 적정 혼합비는 1:1로 나타났으며 초기 시료의 pH는 퇴비내 미생물의 활동을 위한 온도상승에 큰 영향을 미치지 않았다. 또한 혼합비가 1:1인 시료의 퇴비화시 C/N 비는 10-15를 유지하여 약간 낮게 나타났으나 pH의 상승없이 퇴비화가 잘 이루어짐을 알 수 있었고 주 1회 뒤집기를 수행하는 것이 가장 효율적인 것으로 나타났다.