• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.59.1-59.1
• /
• 2009

레독스 흐름 배터리 (Redox Flow Battery)는 외부의 탱크 등에 저장해 둔 활성물질(이온 가수가 변화는 금속) 의 용액을 펌프로 전해셀에 공급하여 충전 방전하는 배터리로 신재생 에너지인 풍력과 태양광 발전, 야간의 잉여 전력 저장 등 대용량 전력 저장 장치로 관심이 높아지고 있다. 대표적인 레독스 흐름 배터리로 알려진 바나듐 레독스 흐름 배터리는 이온 교환막 사용으로 인하여 전기전도도, 기계적 강도, 투과도 및 전해질 내의 화학적 안정성 등 여러 가지 문제점과 함께 비용 문제점을 야기한다. 하지만 새로운 용해 납 레독스 흐름 배터리는 이온 교환막을 사용하지 않아 바나듐 레독스 흐름 배터리의 문제점 및 시설비가 절약되는 장점이 있어 새로이 연구되지고 있다. 본 연구는 레독스 흐름 배터리에 주로 이용되는 카본 전극재료의 따라 형성되는 Pb, $PbO_2$ 박막의 미세 구조를 및 에너지 효율 특성을 분석하였다. 실험은 half-cell로 이루어졌으며 작업전극은 Carbon felt, Ordered Graphite, Disordered Graphite, Glassy Carbon 등을 여러 카본 재료를 사용하였고, 상대전극은 Pt, 기준전극으로 Ag/AgCl를 사용하여 Cyclic Voltammetry특성과 충방전 특성을 연구하였다. 전해질은 Lead Carbonate ($PbCO_3$)+Methanesulfonic acid ($CH_3SO_3H$) 들어간 수용성 전해질을 교반을 통해 이용하였다. 여러 carbon 전극재료와 생성된 Pb, $PbO_2$ 막의 표면구조, 미세구조, 상들의 변화는 XRD, SEM, EDX, Raman등을 통하여 분석하였으며, 전기화학 공정의 변수와 전극에 따른 에너지 효율특성에 대하여 고찰해 보았다.

• Archives of Pharmacal Research
• /
• v.24 no.4
• /
• pp.355-359
• /
• 2001

A novel HPLC method with electrochemical detection has been developed for the determination of recombinant human epidermal growth factor (rhEGF) in pharmaceutical products. rhEGF was separated from other components in formulation on a reversed-phase C18 column with 24% acetonitrile in 0.1 M phosphate buffer (pH 4.75). The optimum electrochemical oxidation of EGF was obtained at 0.85 V vs. Ag/AgCl in a glassy carbon working electrode due to electroactive tyrosine, tryptophan, methionine, and arginine residues. The quantitation range was from 1.0 to 200 ng of rhEGF with the linear correlation coefficient greater than 0.999. The method was successfully applied for the quantitation of rhEGF in a pharmaceutical preparation.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.3
• /
• pp.117-124
• /
• 2005

Electrochemical oxidation of ethanol at nickel electrodes has been studied in 1 M KOH solution containing 0.20M ethanol using electrochemical impedance spectroscopy. Equivalent circuits have been worked out by simulating the impedance data, and the results were used to model the oxidation of ethanol as well as the passivation of the electrode. The maximum rate of oxidation of $Ni(OH)_2$ to NiOOH was observed at about 0.37V vs. Ag/AgCl reference electrode, while the maximum rate of ethanol oxidation at the Ni electrode was observed at about 0.42V, The charge-transfer resistance for oxidation of the electrode itself became smaller in the presence of ethanol than in its absence. These results suggest that the $\beta-Ni(OH)_2/\beta-NiOOH$ redox couple is acting as an effective electron transfer mediator far ethanol oxidation. The kinetic parameters also were obtained by the experimental and simulated results.

• Journal of Environmental Health Sciences
• /
• v.26 no.4
• /
• pp.110-114
• /
• 2000

Determination of mercury(II) using Nafion-EDTA-modified glassy carbon electrodes is proposed. it is based on the chemical reactivity of an immobilized modifier, Nafion-EDTA. Differential pulse voltammetry is employed, and the oxidation of complexes, at +0.43V vs. Ag/AgCl, is observed. For a 5-min preconcentration period, a linear calibration curve is obtained for mercury(II) concentrations ranging from 1.0$\times$ 10$^{-8}$ to 1.0$\times$10$^{-6}$ M. Further, when an approximate amount of copper(II) is added to the test solution, We demonstrate that at a preconcentration time of 5 min the Nafion-EDTA-modified glassy carbon electrode has a dynamic range of 2 orders of magnitude(from 10$^{-10}$ to 10$^{-8}$ M) and the detection limit is as low as 0.5$\times$ 10$^{-10}$ M(0.01 ppb). This method is applied to the determination of mercury(II) in sea water(4.0$\times$10$^{-10}$ M, 0.08ppb). The result agrees satisfactorily with the value(below 0.1 ppb) measured by using ICP/MS.

• Journal of Sensor Science and Technology
• /
• v.22 no.5
• /
• pp.309-314
• /
• 2013

Glass micropipettes are widely used for drug injection in neurological studies. To enable these devices to monitor neural activity simultaneously with drug injection, an electrode such as Ag/AgCl must be located near or inserted into the glass micropipette to detect electrical signals in vivo. Here, we report carbon-nanotube-modified glass micropipettes (CNGs), which have excellent electrochemical properties such as low impedance and large electrochemical surface area suited for neural recording. In addition, using a standard pressure pump, CNGs can deliver drugs to the target region without bending. Because they are based on standard glass micropipettes, CNGs can readily be applied to traditional equipment, creating opportunities to monitor precisely the drug-injected area.

• Journal of Sensor Science and Technology
• /
• v.18 no.5
• /
• pp.359-364
• /
• 2009

This paper presents flexible electrocardiography(ECG) sensors using micro electro mechanical systems(MEMS) and flexible printed circuit(FPC) technology. By using FPC technology, ECG sensors which consisted of an outer hook-shaped electrode and an inner circular-shaped electrode were fabricated on the polyimide substrate. Thereafter, the bipolar ECG sensor was miniaturized using MEMS technology. The ECG measurement capability was examined by attaching the sensor to the human chest and wrist. Performance of the proposed sensors was then compared with ECG measured by commercial Ag/AgCl electrodes. It was verified that ECG could be measured using proposed sensors at only single body.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.10
• /
• pp.1448-1454
• /
• 2014

In this study, a new type of electrode device is implemented to measure the capacitance energy and interpret it as the ECG (Electrocardiogram) data. The main idea of this new electrode system is to estimate the capacitance on the skin by assembling a capacitive-coupled circuits and translate into the ECG signal. To measure the coupling energy and estimate the aquired data in terms of heart activity, the capacitive-coupled electrode is garmented with fabrics in the form of a chest band or a vest jacket. To compare the ECG data from the capacitive-coupled electrode with the conventional electrode(Ag-AgCl) system, the corelation coefficient between two signals is computed as 0.9517. Thus, we can conclude the fact that capacitive-coupled electrode system can measure a person's heart activity without any contact to his or her skin and can the interpreted as the ECG data.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.187-187
• /
• 2010

ZnO의 나노 구조는 화학적으로 안정하고 큰 결합에너지를 가지는 성질 때문에 청색 영역에서 작동하는 광전소자의 제작에 대단히 유용하다. ZnO 나노 구조들은 화학 기상 성장법, 기상 에피텍시 성장법, 화학적 용액 성장법과 같은 여러 가지 방법으로 성장하고 있다. 여러 가지 성장방법 중에서도 전기 화학 증착법으로 성장된 ZnO의 나노 구조는 가격이 저렴하고 낮은 온도에서 성장이 가능하며 대면적화를 할 수 있는 장점이 있다. 전기 화학 증착법으로 ZnO을 성장할 때 3개의 전극을 사용하여 성장하였다. ITO 기판을 음극으로 백금 전극을 양극으로 사용하였고 기준 전극은 Ag/AgCl을 사용하였다. Zinc Nitrate의 몰 농도를 변화하면서 ZnO 나노구조를 성장 하였다. 성장한 ZnO 나노구조를 $400^{\circ}C$에서 2 분정도 열처리를 하였다. 성장된 ZnO을 X-선회절장치를 분석하게 되면 (0002) 피크가 $34.35^{\circ}$에서 주되게 나타났다. 주사 전자 현미경상은 Zinc Nitrate의 몰 농도가 낮을 때 성장한 ZnO 는 나노세선 형태로 형성되었음을 보여주었다. Zinc Nitrate의 농도가 높아지게 되면 ZnO 나노구조가 나노 막대 또는 나노 접시 모양으로 변화되었다. 300 K에서 광루미네선스 스펙트럼은 형성된 나노구조가 엑시톤과 관련된 주된 피크가 Zinc Nitrate 농도에 따라 변화하게 되는 것을 알 수 있었다. 이 실험결과는 ZnO 나노구조의 미세구조와 광학적 성질이 Zinc Nitrate의 농도에 영향을 많이 받는 것을 알 수 있었다.

• Korean Journal of Materials Research
• /
• v.19 no.6
• /
• pp.344-348
• /
• 2009

The electrolyte effects of the electroplating solution in Cu films grown by ElectroPlating Deposition(EPD) were investigated. The electroplated Cu films were deposited on the Cu(20 nm)/Ti (20 nm)/p-type Si(100) substrate. Potentiostatic electrodeposition was carried out using three terminal methods: 1) an Ag/AgCl reference electrode, 2) a platinum plate as a counter electrode, and 3) a seed layer as a working electrode. In this study, we changed the concentration of a plating electrolyte that was composed of $CuSO_4$, $H_2SO_4$ and HCl. The resistivity was measured with a four-point probe and the material properties were investigated by using XRD(X-ray Diffraction), an AFM(Atomic Force Microscope), a FE-SEM(Field Emission Scanning Electron Microscope) and an XPS(X-ray Photoelectron Spectroscopy). From the results, we concluded that the increase of the concentration of electrolytes led to the increase of the film density and the decrease of the electrical resistivity of the electroplated Cu film.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.5
• /
• pp.567-574
• /
• 1993

Mordant Red 19(MR19) is reduced at mercury electrode at -0.67 V vs. Ag/AgCl with two electrons per molecule in pH 9.2 buffer by differential pulse polarography and linear sweep voltammetry. The peak potential is dependent on the pH of solution. The exhaustive electrolysis, however, gives 4 electrons per molecule because of the disproportionation of the unstable hydrazo intermediate. The electrochemical reduction of lanthanide-MR19 complexes is observed at more cathodic potential than that of free ligand. The difference in peak potentials between complex and free ligand varies from 75 mV for $La^{3+}$ to 165 mV for $Tb^{3+}$ and increases with increasing the atomic number of lanthanide. The electrochemical reduction of lanthanide complexes with MR19 is due to the reduction of ligand itself, and it can be potentially useful as an indirect method for the determination of lanthanides. The shape of i-E curves and the scan rate dependence indicates the presence of adsorption and the adsorption was confirmed by potential double-step chronocoulometry and the effect of standing time. Also the surface excess of the adsorbed species and diffusion coefficients are determined. The composition of the complex is determined to be 1 : 2 by spectrophotometric and electrochemical methods.