• 한국레이저가공학회지
• /
• 제14권4호
• /
• pp.14-20
• /
• 2011

The advantage of using lasers for through silicon via (TSV) drilling is that they allow higher flexibility during manufacturing because vacuums, lithography, and masks are not required; furthermore, the lasers can be applied to metal and dielectric layers other than silicon. However, conventional nanosecond lasers have disadvantages including that they can cause heat affection around the target area. In contrast, the use of a picosecond laser enables the precise generation of TSVs with a smaller heat affected zone. In this study, a comparison of the thermal and crystallographic defect around laser-drilled holes when using a picosecond laser beam with varing a fluence and repetition rate was conducted. Notably, the higher fluence and repetition rate picosecond laser process increased the experimentally recast layer, surface debris, and dislocation around the hole better than the high fluence and repetition rate. These findings suggest that even the picosecond laser has a heat accumulation effect under high fluence and short pulse interval conditions. To eliminate these defects under the high speed process, the CDE (chemical downstream etching) process was employed and it can prove the possibility to applicate to the TSV industry.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.80-91
• /
• 2023

The purpose of this study is to suggest the direction for the development of intelligent agricultural machinery technology in the Republic of Korea. For this purpose, intelligent technology of agricultural machinery was divided into autonomous agricultural machinery and tractor-implement intelligent communication technology. Then, a survey and analysis of a previous study of the Republic of Korea and foreign countries were conducted. GNSS-based autonomous driving technology is still widely used worldwide, and recently, as research on camera and LiDAR-based autonomous driving is actively progressing, autonomous driving technology is becoming more advanced. ISOBUS-based technology is being developed worldwide for intelligent control of tractor-attached implements, and major global agricultural machinery manufacturers are actively applying it to their products. However, although some ISOBUS technologies are being researched in the Republic of Korea, there are no cases of application on agricultural machinery yet. Therefore, to be globally competitive in the agricultural machinery manufacturing industry, there is an urgent need to advance autonomous driving technology and commercialize agricultural machinery using ISOBUS technology.

• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.1-11
• /
• 1997

Austomated visual inspection(AVI) capability has become an important key component in the automated manufacturing system. In such a visual inspection system an intensity(or color) image of a scene is quickly affected by optical property of objects, condition and roughness of surface, lens and filters, image sensor property and lighting system. In particular, the lighting system disign is the most important factor, since it affects overall performance of the visual system. For fast and cheap automated visual inspection system it is important to obtain the good image quality which results from careful attention to the design of the lighting system. In this paper, the lighting subsystem of AVI system is analysed for the inspection of printed circuit board(PCB) patterns. The spectral reflectance of materials, which are composed of PCB, is measured for choosing the light source. The reflection property is theoretically obtained by a reflection model and also obtained by experiments which measure intensity with varying the viewing direction of image sensor and the lighting direction of illuminator. The illumination uniformity of a ring-type illuminator. The lighting system is designed based upon the experimental results and theoretial analysis.

• 수산경영론집
• /
• 제41권1호
• /
• pp.53-72
• /
• 2010

The objects of this study are to consider the current features and the development process of the utilizing system of aquaculture farms in Japan, and to suggest the theoretical basis for improvement of aquaculture system of Korea in the future through the analysis of background of the liberalization theory proposed recently. The aquaculture-fishery system of Japan was begun from the Meiji Era Fishery Act and New Fishery Act of the World war II. A small sum of fishery fee is paid to the fishery cooperative having fishing rights for securing fishing area newly, because the aquaculture of Japan belong to fishery cooperative not individual ownership of union membr of cooperative society, the other words, cultivation fisheries household. In case of Korea, there are several differences with Japan as follows; almost cultivation fisheries household has a individual license, the lisence of fishing rights are recognized as an article, the license of fishing lights are able to do sale. Therefore, it is needed to paid a lots of money for securing fishing area newly. On the other hand, advanced countries in the marine aquaculture such as Norway have reached the stage where the managing abilities of marine aquaculture are similar to those in the manufacturing industry. And the number of large scale aquaculture farms with developed technologies and advanced marketing strategies in those countries is increasing. Considering that the marine aquaculture in Japan under the similar fishery systems of Korea has developed the state-of-the-art management skills or lead to large scale management, it is difficult to expect the decrease in the production costs under the small scale family business in Korea and this will lead to the decreasing competitive advantage over the imported seafood. Therefore marine aquaculture in Korea needs to increase the economy of scale to acquire the competitive advantage.

• 한국화재소방학회논문지
• /
• 제31권1호
• /
• pp.108-115
• /
• 2017

본 연구의 목적은 현행 위험물안전관리법이 위험물에 대한 저장, 취급 및 운반 등에 대한 예방정보전달(information communication)의 주요내용으로만 구성되어 있으므로 사고대응(incident response)에 대한 내용이 아주 미미함으로 초기대응에 문제점이 도출되고 있는 실정이다. 따라서 사고예방과 대응을 동시에 갖는 선진화 방법인 GHS체계로 위험물안전관리법 개선(안)을 제시하고자 한다. 또한 위험물안전관리법과 GHS제도의 위험성 분류체계가 많이 달라 제조소 등의 산업계와 수 출입 업체에 혼란을 야기 시킬 수 있으므로, 주요 선진국의 위험물 분류체계 분석을 통하여 위험물안전관리법과 GHS 분류체계의 조화방안을 제시하였다.

• 전기화학회지
• /
• 제23권1호
• /
• pp.1-10
• /
• 2020

불용성 산화 전극(Dimensionally Stable Anode, DSA)은 물리적, 열적, 전기화학적으로 안정적인 산화 전극이며, 주로 Ru, Ir, Ta 등의 금속 산화물이 Ti 기판에 코팅되어 사용된다. DSA 전극의 우수한 물성을 바탕으로 chlor-alkali, 전기화학적 수처리, 수전해 등의 여러 분야에 활용되고 있다. 이에 본 총설은 DSA 전극의 여러 분야의 적용과 관련된 최근 5년 자료를 정리 요약한 것이다. 이를 통해 DSA 전극의 다양한 적용을 위해서 전극 물질의 스크리닝, 구조 설계 및 경제적인 제조법에 대한 연구가 필요하다는 것을 알 수 있었다. 이러한 연구를 통하여 다양한 분야에 적용할 수 있는 DSA 전극 개발에 기여할 수 있을 것으로 기대된다. 또한, DSA 전극 개발을 통하여 전기화학적 공정을 적용할 수 있는 응용 분야를 넓힐 수 있을 것으로 예상한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.757-759
• /
• 2013

수 년 전까지만 해도 Verilog나 VHDL과 같은 하드웨어 기술언어 (HDL)를 사용한 레지스터 전송수준의 설계 기법은 기존의 회로도에 의존했던 방법에 비해 최첨단의 기술로 인식되었고 현재까지도 디지털 회로를 설계하는 방법으로 가장 널리 사용되고 있다. 하지만 공정 기술의 발전으로 반도체 칩의 트랜지스터 집적도가 십억 개 단위를 훌쩍 넘어서는 시대가 열림에 따라, 레지스터 전송 수준에서 회로를 설계하는 것은 너무도 복잡한 일이 되어버려, 더 이상 시대의 요구에 부응하지 못하여 설계 패러다임이 상위수준에서 설계와 합성이 이루어지는 쪽으로 변화하여야 한다. 블루스펙 HDL은 현재까지 개발된 HDL 중 유일하게 시스템 레벨에서 회로를 설계하는 것을 가능하게 함과 동시에 합성이 가능한 코드를 생성해주는 언어이다. 본 고에서는, 아직 많이 알려지지는 않았지만, 진화한 설계 패러다임을 지향하는 블루스펙 HDL에 대해 소개하고 분석하도록 한다.

• 수산경영론집
• /
• 제36권1호
• /
• pp.139-153
• /
• 2005

Marine fish aquaculture has been introduced on the East sea since 1964. The production volume of the marine aquaculture has been increasing drastically since 1990 with the technological improvements and the introduction of new species. However, the increasing costs of feed, seedlings and medical supplies and the decreasing prices due to the increase in the imports and domestic production have decreased the profits in the aquaculture business. Futhermore, the damage from the natural disasters such as red tides and typhoons has accelerated the exit from the business. Even though managing abilities to overcome the business crisis caused by the above factors are required, business managers based on the small scale family businesses do not have enough managing abilities to deal with the difficulties in the business. On the other hand, advanced countries in the marine aquaculture such as Norway have reached the stage where the managing abilities of marine aquaculture are similar to those in the manufacturing industry. And the number of large scale aquaculture farms with developed technologies and advanced marketing strategies in those countries is increasing. Considering that the marine aquaculture in Japan under the similar fishery systems of Korea has developed the state-of-the-art management skills or lead to large scale management, it is difficult to expect the decrease in the production costs under the small scale family business in Korea and this will lead to the decreasing competitive advantage over the imported seafood. Therefore marine aquaculture in Korea needs to increase the economy of scale to acquire the competitive advantage. This study addresses the possibility of introducing the large scale aquaculture system in Korea by analysing the factors and process of leading to large scale businesses in the aquaculture in Japan.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.405-430
• /
• 2021

Production planning is a key part of production management of manufacturing enterprises. Since computerization began, modern production planning has been developed starting with Material Requirement Planning (MRP), and today Enterprise Resource Planning (ERP), Advanced Planning and Scheduling (APS), Supply Chain Management (SCM) has been spreading and advanced. However, in the shipbuilding field, rather than applying these general-purpose production planning methodologies, in most cases, each shipyard has developed its own production planning system. This is because the applications of general-purpose production planning methods are limited due to the order-taking industry such as shipbuilding with highly complicated construction process consisting of millions of parts per ship. This study introduces the design and development of the production planning system reflecting the production environment of heavy shipyards in Korea. Since Korean shipyards such as Hyundai, Daewoo and Samsung build more than 10 ships per year (50-70 ships in the case of large shipyards), a planning system for the mixed production with complex construction processes is required. This study draws requirements using PI/BPR (process innovation and business process reengineering) methodology to develop a production planning system for shipyards that simultaneously build several ships. Then, CBD software development methodology was applied for the design and implementation of planning system with drawn requirements. It is expected that the systematic development procedure as well as the requirements and functional elements for the development of the shipyard production planning system introduced in this study will be able to present important guidelines in the related research field of shipbuilding management.

• 한국전기전자재료학회논문지
• /
• 제36권2호
• /
• pp.99-108
• /
• 2023

Currently, semiconductor manufacturing industry heavily relies on a wide range of high global warming potential (GWP) gases, particularly during etching and cleaning processes, and their use and relevant carbon emissions are subject to global rules and regulations for achieving carbon neutrality by 2050. To replace high GWP gases in near future, dry etching using alternative low GWP gases is thus being under intense investigations. In this review, we report a current status and recent progress of the relevant research activities on dry etching processes using a low GWP gas. First, we review the concept of GWP itself and then introduce the difference between high and low GWP gases. Although most of the studies have concentrated on potentially replaceable additive gases such as C₄F₈, an ultimate solution with a lower GWP for main etching gases including CF₄ should be developed; therefore, we provide our own perspective in this regard. Finally, we summarize the advanced dry etch process research with low GWP gases and list up several issues to be considered in future research.