• Journal of Korean Society for Quality Management
• /
• v.47 no.1
• /
• pp.151-162
• /
• 2019

Purpose: This study is in order to secure high quality of military supplies, it is important to secure design quality in the development phase. I will review how to establish a quality assurance system in the development phase based on the author's seminar presentation contents and application example of Hanwha Systems Co., Ltd. Methods: To guarantee design quality in the development phase, in 2002, quality assurance system that is adequate for SQA(Software Quality Assurance)'s requirements of CMM(Capability Maturity Model) was conduct. In 2009, based on the CMMI(Capability Maturity Model Integration) Level 5, there has been continuous and reenforced quality assurance activities. Results: By suggesting the construction and a case study on application of R&D quality assurance, it would be helpful for companies aiming to construct or enhance quality assurance system. Conclusion: To secure high quality for military supplies, a development QA system should be established to secure quality in the development phase. In addition, Total life cycle QA system for development, mass production and operation phase should be reestablished.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.39
• /
• pp.3-26
• /
• 2008

CISG provides the Convention's default provisions on anticipatory breach. Article 71 permits the aggrieved party to suspend the performance of his obligations if it becomes apparent that the other party will not perform a substantial part of his obligations after the conclusion of the contract. The aggrieved party must give notice of the suspension to the other party and if he provides adequate assurance of his performance, the party must continue with performance. Article 72 authorizes the aggrieved party to avoid the contract to the date of performance when it is clear that the other party will commit a fundamental breach. The aggrieved party is also required to give the other party notice of his intent to avoid the contract if time allows. The requirements for avoidance under Article 72 are more stringent than those for suspension under Article 71. Article 72 requires reasonable prior notice only if time allows, while article 71 requires immediate notice with no exceptions.

• Journal of Aerospace System Engineering
• /
• v.11 no.2
• /
• pp.30-34
• /
• 2017

This paper is concerned with product assurance for the secondary payload, which is used for technology and science research, in the satellite system, which consists primarily of the spacecraft and the primary payload (a high-resolution optical camera). The Korean satellite development program has successfully insured the safety of the spacecraft and primary payload. However, given the limits of budget and schedule, it is very important to establish adequate product assurance for the secondary payload, which has a lower priority than the spacecraft or primary payload. This paper studies the concept of product assurance for the secondary payload of technological and scientific equipment.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.19-22
• /
• 2002

The importance of accurate dose delivery in radiotherapy is well documented. Studies have shown that a mere 5% deviation of the prescribed dose can produce an undesirable treatment outcome. Uncertainties in the dose delivery can arise at different stages of the radiotherapy process. Therefore, a good quality assurance programme will ensure the best possible results and consistency of the radiotherapeutic treatment. Quality assurance in any radiotherapy department involves the responsibility of a multi-disciplinary team of radiation oncologists, medical physicists and radiation technologists. This paper will focus on the physical and technical aspects of QA. The organizational structure and responsibility of the physics QA team is outlined and also included the types and frequencies of QA checks. For a QA program to be effective, action levels should be clearly defined and understood by all staff concerned. Data of the Singapore National Cancer Centre's participation over the last ten years with the IAEA / WHO Postal TLD Dose Inter-comparison programme is presented. The data obtained were within the international criteria. For a QA program to be successfully implemented, there must be a commitment by management to provide adequate staff, test equipment, machine time as well as continual training and education. This is in addition to the positive attitudes of all the staff. A quality audit is also necessary to serve as a check and balance to ensure that the QA is in order.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.148-152
• /
• 2000

The experimental study was performed to investigate the effects of centrifugal condition on the segregated layers of materials and the compressive strength of concrete for pretensioned spun high strength concrete (PHC) pile. The considering factors in the test were the centrifugal time and the magnitude of centrifugal force. These factors have been found to have found to have the great influence on the segregation and the concrete strength. The moderate centrifugal condition has to be fitted for the quality assurance in the production of PHC pile, especially to provide the adequate concrete cover over the tendons.

• The Journal of the Korean dental association
• /
• v.52 no.3
• /
• pp.153-163
• /
• 2014

3-dimensional information for anatomic stucture plays a role as integral part in clinical aspect of dental practice. CBCT(cone beam computed tomography) has been accepted as useful diagnostic tool offering Volume data and images for evaluating teeth and jaws in lower radiation dose than conventional CT. CBCT equipment is essential for the quality assurance of it to ensure continued satisfactory performance and result of adequate images. Dental practitioner and oral and maxillofacial radiologist should have a responsibility and critical thinking to deliver this technology to patients in a responsible way, so that diaganostic value is maximised and radiation doses kept as low as resonably achievable. CBCT imaging modality should be used only after a review of the patient's health and imaging history and the completion of a thorough clinical examination. Clinical guidelines are systematically developed statements to assist practitioner and patient decisions about appropriate health care for specific clinical circumstances Dental practitioners should prescribe CBCT imaging only when they expect that the diagnostic yield will benefit patient care, enhance patient safety or improve clinical outcomes significantly. Knowledge of patient dose is essential for clinicians who are making the decision regarding the justification of the exposure. There are some limitation in the measurement of patient dose in CBCT for the approval and adaptation of conventinal methodolgy in CT. It is also important to ensure that doses are optimised and in line with any national and international guidelines. The higher radiation doses of CBCT compared with conventional radiography, mean that high standards must be maintained. The Quality Assurance(QA) programme should entail surveys and checks that are performed according to a regular timetable. QA programme should be maintained by staff to ensure adherence to the programme and to raise its importance among staff.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.2 s.53
• /
• pp.279-294
• /
• 1996

This study was to evaluate hospital characteristics as composition of manpower and facilities to the death rate of patient; and to earmark the factors affecting the overall hospital mortality rates. The data utilized were derived from survey material conducted by the Korean Hospital Association on 32 tertiary referral hospitals in Korea between 1986 and 1994. The findings are : 1. Those hospitals having the most capacity per bed had little difference to the mortality rates than the others. 2. Those hospitals having the most daily patients per specialist had significantly higher mortality rates than the others, but the number of daily patients per nurse had little effect on the mortality rates. 3. Those hospitals which had a relatively sufficient number of quality assurance activities revealed a lower mortality, and particularly in case where such effort was directed to the clinicians, the outcome was remarkable. We concluded that the major factor affecting the hospital mortality rates seems to be the number of specialists per number of beds, the degree of quality assurance assessment of the clinicians, the quality assurance activities of each hospital as a whole, and the number of daily patient per specialist. According to the findings of this study, the composition and quality of specialist and adequate quality assurance activities seemed to be the essential for the improvement of hospital care. Therefore, in this regard e proper implementation of policy and support is highly recommended. Due to lack of available research material, the personal characteristics of specialists haven't been considered in this study. However, this longitudinal observation of 32 tertiary referral hospitals over a nine year period has significant merit alone.

• Journal of Korean Society for Quality Management
• /
• v.30 no.3
• /
• pp.66-78
• /
• 2002

Process capability indices are being used as indicators for measurements of process capability for SPC of quality assurance system in industries. In view of the enhancement of customer satisfaction, process capability indices in which loss functions are used to deal with the economic loss In the processes deviated from the target, are in an adequate representation of the customer's perception of quality In this connection, the loss function has become increasingly important in quality assurance. Taguchi uses a modified form of the quadratic loss function to demonstrate the need to consider the proximity to the target while assessing its quality. But this traditional quadratic loss function is inadequate to assessing the quality and quality improvement since different processes have different sets of economic consequences on the manufacturing, Thereby, a flexible approach to the development of the loss function needs to be desired. In this paper, we introduce an easily understood loss function, based on reflection of probability density function of the normal distribution. That is, the Reflected Normal Loss function can be adapted to an asymmetric loss as well as to a symmetric loss around the target. We propose that, instead of the process variation, a new capability index, CpI using the Reflected Normal Loss Function that can accurately reflect the losses associated with the process and a new capability index CpI Is compared with the classical indices as $C_{p}$ , $C_{pk}$, $C_{pm}$ and $C_{pm}$ $^{+}$.>.+/./.

• Journal of the military operations research society of Korea
• /
• v.25 no.1
• /
• pp.142-159
• /
• 1999

To assign the soldiers in the adequate positions I military is almost as important as managing officers because they compose the main part of military structure and equipment operators. The current Military Occupational Specialty(MOS) assignment system lacks the capability to optimize the use of recruit's potential. We suggest an MOS assignment method for enlisted recruits using the Analytic Hierarchy Process(AHP) method, this method systematically provides a method of calculation of composite relative weights of decision elements to be considered during MOS assignment and a method of quantification for personal quality of new recruits. The quantified value of personal quality, Mission Performance Capability(MPC), in this study means the mission performance capability when a personnel is assigned to a certain MOS. This paper develops a multiple objectives MOS assignment model for enlisted recruits. It uses MPC of personnels, calculated with AHP method and consensus method, as parameters. The goal constraints are assurance of filling requirement, minimization of the number of unassigned personnel to MOS, capability satisfaction of education facility and support facility, assurance of desired MPC value level for MOS assignment, and maximization of total MPC. The objective function is to terminalization of the negative or positive deviation for the above goal constraints.

• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.319-324
• /
• 2000

This paper shows hot to model the submerged elastic structures and adequate analysis tools for modal behavior when using finite element and boundary element method. Four different cases are reviewed depending on the location of the water and air. First case is that structures are filled with air and water is located outside. Second case is opposite to case one. These cases are solved by direct approach using collocation procedure. Third case is that water is located both sides of structures. Last case is that air is located both sides. These cases are solved by indirect approach using variational procedure. As analysis tools harmonic frequency sweep analysis and eigenvalue iteration method are selected to obtain the natural frequencies of vibrating submerged structures depending on the cases. Results are compared with closed form solutions of submerged spherical shell.