• The Journal of Advanced Prosthodontics
• /
• 제14권1호
• /
• pp.12-21
• /
• 2022

PURPOSE. The purpose of this study was to investigate changes in retention and wear pattern of Locator^® and ADD-TOC attachments on a digital milled bar by performing chewing simulation and repeated insertion/removal of prostheses in fully edentulous models. MATERIALS AND METHODS. Locator (Locator^®; Zest Anchors Inc., Escondido, CA, USA) was selected as the control group and ADD-TOC (ADD-TOC; PNUAdd Co., Ltd., Busan, Republic of Korea) as the experimental group. A CAD-CAM milled bar was mounted on a master model and 3 threaded holes for connecting a bar attachment was formed using a tap. Locator and ADD-TOC attachments were then attached to the milled bar. Simulated mastication and repeated insertion/removal were performed over 400,000 cyclic loadings and 1,080 insertions/removals, respectively. Wear patterns on deformed attachment were investigated by field emission scanning electron microscopy. RESULTS. For the ADD-TOC attachments, chewing simulation and repeated insertion/removal resulted in a mean initial retentive force of 24.43 ± 4.89 N, which were significantly lower than that of the Locator attachment, 34.33 ± 8.25 N (P < .05). Amounts of retention loss relative to baseline for the Locator and ADD-TOC attachments were 21.74 ± 7.07 and 8.98 ± 5.76 N (P < .05). CONCLUSION. CAD-CAM milled bar with the ADD-TOC attachment had a lower initial retentive force than the Locator attachment. However, the ADD-TOC attachment might be suitable for long-term use as it showed less deformation and had a higher retentive force after simulated mastication and insertion/removal repetitions.

• 대한전자공학회논문지SD
• /
• 제37권10호
• /
• pp.51-56
• /
• 2000

본 논문에서는 용융-인장형 광섬유커플러 내부에 격자를 새겨 넣음으로써 광섬유커플러형 add/drop 필터를 구현해 보았다. 결합비가 99.8%인 광섬유커플러와 길이가 10mm인 광섬유격자로 구성된 add/drop 필터의 투과스펙트럼상의 최대 반사효율과 drop 효율은 각각 99%와 83%를 보여주었다.

• 한국안광학회지
• /
• 제5권2호
• /
• pp.115-118
• /
• 2000

본 연구에서 근용가입도의 굴절력은 평균 +0.50Dptr에서 +4.00Dptr까지의 굴절력을 나타났으며 그 결과는 다음과 같다. 44세 이하에서는 +1.00 Dptr의 가입도를 나타냈고 50세 이하에서는 +2.00 Dptr 이하의 굴절력을 나타냈다. 55세 이하에서는 +1.50 Dptr에서 +3.00 Dptr의 범위를 나타냈고 56세부터 65세까지는 +2.50 Dptr에서 +4.00 Dptr의 근용가입도를 나타냈다. 근용 안경 착용자는 평균 60%로 나타났다.

• 생명과학회지
• /
• 제25권1호
• /
• pp.21-28
• /
• 2015

한우와 제주흑우실용화축군(JBC-DC) 집단에서 ADD1 유전자의 유전적 다형성을 조사하였다. ADD1 유전자형은 intron 7 영역에서 84-bp 절편의 유무에 따라 결정하고, 두 집단에서 ADD1 유전자형과 경제형질의 상관관계를 시험하였다. 한우 거세우집단에서는 ADD1 D/- 도체들이 WW 개체들보다 유의적으로 더 두꺼운 등지방두께를 보여주었다(p<0.05). 하지만, JBC-DC 집단에서는 이형접합인 WD에서 가장 두꺼운 등지방두께를 나타냄을 볼 수 있었고(p<0.05), 이는 W와 D 대립인자의 상승효과에 의해 등지방 축적이 증가하는 것으로 추정된다. 반면 육질등급지수나 근내지방도으로 측정된 근육조직에서 근내지방의 축적과 ADD1 유전자형과은 상관없는 것으로 조사되었다. 이상의 결과들로부터, ADD1 유전자는 근육조직의 근내지방보다는 피하조직에서 등지방에 영향을 주는 것으로 보인다. 또한 DD 유전자형에서 W/-인 동물들에 비해 더 높은 수준의 육색을 나타내었다(p<0.05). 흥미로운 것은 JBC-DC 집단에서만 도체중과 유전자형 사이에 고도의 유의적인 차이를 나타내었는데, D/-인 동물들이 WW인 동물들에 비해 38 kg 이상 더 무거웠다(p<0.001). 연구결과는 ADD1 유전자형에 따라 빠른 성장률과 거세우의 생산성에 차이들을 나타내는 것을 보여주고 있다. 이러한 발견들은 ADD1 유전자형이 유전적 분자 마커로써 한우와 제주흑우-유래 축군의 개량을 위한 교배육종에서 효과적인 역할을 수행할 수 있음을 보여주는 결과이다.

• 한국군사과학기술학회지
• /
• 제15권3호
• /
• pp.288-297
• /
• 2012

This paper describes the verification test on Electromagnetic Environmental Effects(E3), which conducted on ground as a final step to confirm the normal operation of ELINT pod and Safety-of-Flight of KF-16C/D mounted with ELINT pod prior to the initial flight. Based on MIL-STD-464A, indispensable 7 requirements among 14 detailed requirements total were carried out in the test. Considering the Safety-of-Flight(SOF), we invest a great deal of time and effort on Hazards of Electromagnetic Radiation to Ordnance(HERO) and Intra-system EMC test. E3 test and evaluation were performed on 62 equipments of KF-16C/D, respectively. As a result, we verify that KF-16C/D mounted with ELINT pod(hereafter "system") are electromagnetically compatible among all subsystems and equipment within the system and with environments caused by electromagnetic effects external to the system.

• Communications for Statistical Applications and Methods
• /
• 제17권1호
• /
• pp.107-115
• /
• 2010

제제간의 생물학적 동등성을 입증하는데 실패했을 때 추가시험을 허용하는 새로운 생물학적 동등성 시험 기준이 2008년 7월부터 시행하게 되었다. 추가시험의 의미나 시험 기준에서 제시하는 절차를 살펴보고 추가시험의 통계학적 의미를 고찰한다. 또한 사례를 통해 추가시험을 고려할 경우 어떤 점에 유의하여야 성공 할 수 있을 것인가 논의한다.

• 한국염색가공학회지
• /
• 제12권1호
• /
• pp.68-75
• /
• 2000

In this study, polyester DTY faille(yoryu) and N/NP microfiber fabrics were pretreated (desizing, scouring and shrinking) by Continuous Scouring and Shringking Equipment with rota-drum and conveyor type in which types were different with retaining method. The results were as follows. The shrinkage ratio of wp/wf direction of DTY fabrics scoured by conveyor type was 1.5/23% higher than those by rota-drum type at $97^\circ{C}$ with 10min. treatment. In this case, The shrinkage ratio of wp/wf direction by those types was about 15/27%, respectively. The shrinkage ratio of wp/wf direction of N/NP microfiber fabrics scoured by conveyor type was 1.5/23% higher than that by rota-drum type at $97^\circ{C}$ with 10min. treatment. The size add-on of DTY fabrics scoured at $97^\circ{C}$ with 10min. treatment by conveyor type and by rota-drum type were 0.15% and 0.42%, respectively. The size add-on of DTY fabric treated by rota-drum type decreased until 9min. of treated time, but increased after 9min. The size add-on of N/NP microfiber fabrics treated by conveyor type was decreased by increasing temperature and treated time, while the size add-on of that treated by rota-drum type was decreased until 6min. treated time and increased after 6min. The size add-on of N/NP microfiber fabrics treated by conveyor type at $97^\circ{C}$ for 10min. was 0.3% lower than that by rota-drum type.

• 한국염색가공학회지
• /
• 제14권1호
• /
• pp.43-50
• /
• 2002

Silk/Cotton fabrics were treated with butanetetracarboxylic acid(BTCA) to improve crease recovery and anti-shrinking properties at various curing temperatures and pH values. We investigated the effects of finishing conditions on add-on of BTCA, bending property(E, 2HB), wrinkle recovery angle, shrinkage, and dyeing properties. The Add-on of BTCA increased with increasing curing temperature and concentration. Crease recovery was improved with decreasing shrinkage. Maximum add-on of BTCA was showed at pH 2.5. In case of dyeing and mercerization, silk side treated with BTCA was more flexible than untreated, whereas cotton side was more stiff. In dyeing after mercerization, B and 2HB values were higher and K/S values were doubled nearly. The hand of fabric improved with decreasing B and 2HB by the BTCA treatment. BTCA treatment after reactive dyeing improved crease recovery, and caused no change of color difference. However, BTCA treatment after reactive dyeing didn't improve crease recovery, whereas B and 2HB were decreased considerably by the treatment.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.353-358
• /
• 2011

In this paper, we have introduced a Missile In the Loop Simulation(MILS) Software developed for the missile ground test, which is based on a commercial hard real-time operating system(OS) on Windows platform called as Real-Time eXtension(RTX). MILS software makes it possible to test overall system functions of a integrated missile on the ground in the flight conditions by real-time imitating its inertial data. By means of MILS, we have performed missiles ground tests, which result in successful real flight tests.

• Journal of Ceramic Processing Research
• /
• 제20권1호
• /
• pp.59-62
• /
• 2019

Y2O3-MgO nanocomposites are promising materials for hypersonic infrared windows and domes due to their excellent midIR transmittance and mechanical properties. In this work, influence of SPS heating rate on the microstructure, IR transmittance, and mechanical properties of Y2O3-MgO nanocomposites was investigated. It was found that the average grain size decreases with a decreasing heating rate, which can be attributed to high defect concentration by rapid heating and deformation during densification. Also, the residual porosity decreases with a decreasing heating rate, which is ascribed to the enhancement of grain boundary diffusion by a large grain-boundary area (a small grain size). Consequently, high transmittance and hardness were attained by the low heating rate. On the other hand, the mechanical strength showed little difference with the heating rate change, which is somewhat different from the general knowledge on ceramics and will be discussed in this letter.