• Korean Journal of Construction Engineering and Management
• /
• 제24권2호
• /
• pp.13-23
• /
• 2023

Unlike building construction projects, where the activity is repeatedly carried out in a limited area, civil engineering projects such as roads and railroads are carried out in a linear type in a horizontal working space over several tens of kilometers. Each activity is managed with a station number that has a unit of distance from the starting point to the end point. For this reason, since the work location information of the activity is a major management factor, the Gantt chart system that expresses only schedule information may have limitations. In this study, authors propose a method for constructing a linear schedule chart that can simultaneously express schedule information indicating the start and finish dates and location information indicating the start and end positions of each activity, and develop a system for generating a linear schedule chart. In the study, the coordinate axes of the linear schedule chart consisted of distance and date values on the X and Y axes, respectively, and each activity was expressed as a symbol that can infer the type of work to increase the visibility of the linear schedule chart compared to the simple bar chart method. The linear schedule chart generation system was reviewed for practical applicability by utilizing the actual schedule data of bridge structures in a railroad project.

• Korean Journal of Construction Engineering and Management
• /
• 제5권5호
• /
• pp.135-142
• /
• 2004

This paper proposes the CPM bar chart (CBC), a hybrid of the bar chart and the critical pad method (CPM). The CBC overcomes shortages of the fenced bar chart, while still keeping advantages. The fence with direction is applied instead of the broken fence, which triggers considerable problems to identify and apply in the fenced bar chart. In addition, the notorious task to find dummy activities is no longer required. Upon the benefits of simplicity in the bar chart and logical work sequence in the CPM network. the CBC provides a relatively easy way to create and understand a schedule, thus improving communication quality between project participants. With the advantages, the CBC can also be effectively applied to various scheduling techniques such as resource constrained scheduling, resource leveling, scheduling with activity split, delay impact analysis, etc.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제3권2호
• /
• pp.156-165
• /
• 2000

This paper describes modeling and simulation of automotive forward collision warning and avoidance system using CASE(Computer-Aided Systems Engineering) tool. The system is composed or many sensors, a controller, warning devices, brakes and etc. The system was modeled by one activity chart, fourteen state charts and one module chart. Rear-end collision scenarios was generated by Simulink and used to support Stalemate model. The resulting model was used to evaluate the correctness of function and behavior of the system. A simulator for the system has been designed and used to validate the model under realistic operating conditions in the laboratory. To model and simulate the system's functionality and behavior brings clarity to system design early in the system development.

• Journal of Korean Institute of Industrial Engineers
• /
• 제14권2호
• /
• pp.71-80
• /
• 1988

The primary purpose of this study is to develop an automation tool capable of converting the specification of structured analysis into that of structured design. Structured Analysis and Structured Design Language (SASDL) is a computer-aided description language based on ERA model and particulariged by ISLDM/SEM. The automation tool utilizes the specifications of data flow diagram described in SASDL to produce their corresponding SASDL specification of structure chart. The main idea behind the automatic conversion process is to categorize the bubbles in data flow diagram and to determine the positions of the bubbles in structure chart according to their categories and the relative locations in data flow diagram. To make the problem into manageable size, the whole system is broken down into separate parts called activity units. A great deal of manual jobs, such as checking processes leveling, checking data derivation of processes, deriving structure chart from data flow diagram, checking any inconsistency between data flow diagram and structure chart and so forth, can be automated by using SASDL and conversion tool. The specification of structure chart derived by conversion tool may be used in an initial step of design to be refined by SASDL users.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제17권4호
• /
• pp.587-601
• /
• 1993

In the order to grasp their physical characteristics stemming from activity amount, this paper has divided elderly women into the following group ; those with high activity in the past, those with low activity in the present, those with high activity in the present and those with low activity in the present. The analyses of the body measurements and the pie chart, and the classification of back shapes by taking photographs have led to the following results. 1. The items of depth and girth among the body measurements were significant in the past and the present activity. Those with high activity in the past had smaller sizes in depth and girth than those with low activity. 2. From the pie chart, it was shown that those with high activity in the past had smaller sizes in every index as well as in girth than those with low activity in the past. Both those with low activity in the present and those with medium activity in the present had somewhat large sizes in waist girth, bust girth, hip girth and abdominal girth and in the indices of these items. 3. The classification of back shapes by taking photograpes has shown that those with high activity in the past had the less bent body type-42 percent of Type A and 6.5 percent of Type D. Among those with medium activity in the present, Type A was most outstanding and Type C and Type D were less, This fact shows that those with medium activity in the present keep the most normal body type. This proves that the medium activity of elderly women is desirable for keeping the normal body type.

• Ocean and Polar Research
• /
• 제25권2호
• /
• pp.133-145
• /
• 2003

Deep-sea surface sediments were collected using a multiple corer at 20 stations of Clarion-Clipperton fracture zone in the northeast equatorial Pacific to understand latitudinal and longitudinal variations of geotechnical properties. There was a distinct latitudinal variation of geotechnical properties in the study area. The northern sediments showed finer grain size, lower water content and porosity, higher bulk density and specific grain density, lower liquid limits and plastic limits than their southern counterparts. The northern sediments are classified into inorganic clays of low plasticity (fat clays) on plasticity charts and normal to active clay on activity chart, whereas, the southern sediments are classified into fine-grained, highly-plastic, inorganic and biogenic silt or organic clays on plasticity chart and normal to very active clay on activity chart. When shear strength are considered, the northern sediments were found to be in unconsolidated states, while the southern ones to be normal to over-consolidated states. These latitudinal variations in sediment characteristics are likely caused by differences in productivity of surface water that controls sediment compositions, sedimentation rates, and grain solubility.

• Journal of The Korean Association of Information Education
• /
• 제16권4호
• /
• pp.489-502
• /
• 2012

Today computer education puts an emphasis on algorithm education. There are little researches about how to express the given problem in algorithm and how to interpret the expressed algorithm. In this study play-based learning methods dealing with flow chart which is one of the expressing tools of algorithm are developed for lower graders of elementary school. Then we diagnosed the learning possibility of the tool after applying the methods in a classroom environment. There are four types of learning game activities; sequential play, selective play, repetitive play and puzzle play. Puzzle play is a game that students need to reconstruct the learned content to a real flow chart by using flow chart cards. The result of an achievement test after teaching students flow chart showed that the group who took the play-based lesson got their average score with about 7.5% higher than the group who took the ICT-based lesson. Both the groups got their average scroe of more than 9 out of 10 after the lesson. This result shows that flow chart lessons are adaptable for the lower graders of elementary school. It also shows that play-based education can be exceptionally effective.

• Journal of Fisheries and Marine Sciences Education
• /
• 제16권2호
• /
• pp.227-237
• /
• 2004

Recently development trends in information technology expand the activity boundaries for human living beyond coastal zones. These rapid changes of paradigm are stimulating scientists and strategists to be encouraged in making adequate model for marine geographic information system (MGIS) and their applications. Coastal zones are places which are affected by many factors, such as water quality, tide, wave, atmosphere, population, industry, etc. Therefore information related to the coast has to be integrated and analyzed for managing it efficiently. GIS-based Ocean Informatics is suited for those purposes and used in the study for establishing and managing coastal geographic and environmental information system. This paper reviews the properties of ocean and coastal spaces, then defines some MGIS related terminologies for clarifying the scope of MGIS boundaries. In this study, coastal geographic information is established by digital geographic information and digital terrain information. Digital coast chart having information on digital chart and map can merge and analyze various coastal information and can be a useful tool for the coastal integrated management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제38권4호
• /
• pp.601-610
• /
• 2018

Since the building construction works are repeated vertically in a limited space, there is not a great need for the location information of each activity in the schedule management. On the other hand, civil engineering works such as road and railway projects consist of a large number of earthworks, long bridges, and long tunnels. These types of work should be controlled in a horizontal space according to the linear axis of several tens of kilometers. In other words, since most of the activities are managed in the unit of distance from the start point to the end point, it is possible to improve the efficiency of the schedule management by linking the location information of the activity with the schedule data in the schedule management system. This study presents a methodology for creating a linear schedule chart specific to a project with horizontal work space and compares the convenience with the existing Gantt chart. In addition, the methodology of linking linear schedule chart to the 4D CAD system, which is a typical BIM technology in the construction phase, is presented to improve the usability of BIM. The practical applicability of the proposed methodology was verified statistically.

• Korean Journal of Social Welfare
• /
• 제40권
• /
• pp.97-130
• /
• 2000

The purpose of this paper is a case study on welfare QC circle which is considered as one of the management techniques to improve service quality among recently changing welfare environment. Futhermore this paper is also to suggest a new introduction of the welfare QC circle in korean social welfare agency. To accomplish these purpose, this study theoretically examines activity process and techniques of welfare QC circle. In practice, three social workers and one supervisor working at 'D' community welfare center in pusan are participated during six months. As a result, we founded the specific problems that is aroused from youth volunteer group within by fish bone chart, and proposed the alternative choices by 5W1H check sheet, and also certified to decrease turnover ratio in youth volunteering by pareto chart. This study, however, has its limitation in selection only one case study on welfare QC circle of youth volunteering. Welfare QC circle could be much contributed as one of the management techniques to enhance the quality of social welfare service from the viewpoint of the customer, If it is well developed korean welfare QC model which is suitable to social welfare organization and service. Therefore, in order to introduce welfare QC circle in korean social welfare organizations, I would like to suggest to find out a useful text of welfare QC and organize some welfare QC study groups including other suggestions.