• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.67-76
• /
• 2007

Although Hi-pass have been operated for alleviating traffic congestion and enhancing mobility in expressways since 2000, there is not any standard for safe operation. For that reason, we investigated about tubular markers, which is a typical facility for safety in Hi-pass. Tubular Markers are installed for separating same or opposite traffic flows spatially, supporting the marks at a place which has not only high possibility of accidents but distinguished carefulness of drivers. In this paper, it is noted two considerings; one is prevention of accident from the speed gap of autos and Hi-pass vehicles; the other is guarantee of necessary distance that Hi-pass vehicles could be changes the lanes for off-ramp. Focusing those considerations, it is proposed not only prefer distance of tubular markers, but also fundamental basic subjects. We anticipate that the results of this study would be useful reference in more safe and efficient tollgate operation of Hi-pass.

• Korean Journal of Occupational Health Nursing
• /
• v.17 no.2
• /
• pp.239-249
• /
• 2008

Purpose: This study intended to investigate how health and safety organization, management, activities and safety culture of healthcare industries are different from other industries (food, lodging, gas, and electricity industries). Method: Data were analyzed using '2005 The National Survey for Occupational Safety and Health Tendency'. Results: For health and safety training, both new training and regular training time of healthcare sector was lower than comparison sectors. For health and safety manager assigning form, there were many case in healthcare sector to assign a safety manager as a deputy and a health manager as an additional job, there were some differences from comparison sectors. It was found that establishment of countermeasures by cause investigation and analysis execution for occupational accidents in the healthcare sector was lower than comparison sectors. For health and safety activities and safety culture awareness, they were estimated in healthcare sector to be lower than comparison sectors. Conclusion: Healthcare sector had relatively lower health and safety activities and safety culture awareness compared with comparison sectors. So, it is required business owner's concerns and efforts to assign exclusively responsible health and safety manager and to activate health and safety training and occupational accident prevention.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.2
• /
• pp.332-338
• /
• 2010

Annually, electrical fires caused by arcing phenomena in power system rapidly increase as the use of more electric appliances, but there is no established method for the prevention of the accidents. With this background, this paper dealt with the experimental results on a series arc detection technique and a device for air conditioners. Series arcing phenomena that is generated in incomplete connection of air conditioners was simulated, and the frequency spectrum was analyzed. The Fast Fourier Transform (FFT) of the arc pulse showed that the dominant frequency components exist in ranges of 190 kHz~250 kHz and 900 kHz~1.6 MHz. An arc detection circuit with low cut off frequency of 170 kHz to attenuate 60 Hz by 170 dB and a signal discriminator were designed. Also, an algorithm which separate series arc signal from unwanted noises produced by switching operation, inverter, and surge was proposed. Application experiment was carried out on several types of air-conditioners by using the arc generator specified in UL1699, and the results showed the over 99 % accuracy.

• Journal of Preventive Medicine and Public Health
• /
• v.50 no.2
• /
• pp.83-90
• /
• 2017

Objectives: The aim of this study was to model the avoidable burden of the risk factors of road traffic crashes in Iran and to prioritize interventions to reduce that burden. Methods: The prevalence and the effect size of the risk factors were obtained from data documented by the traffic police of Iran in 2013. The effect size was estimated using an ordinal regression model. The potential impact fraction index was applied to calculate the avoidable burden in order to prioritize interventions. This index was calculated for theoretical, plausible, and feasible minimum risk level scenarios. The joint effects of the risk factors were then estimated for all the scenarios. Results: The highest avoidable burdens in the theoretical, plausible, and feasible minimum risk level scenarios for the non-use of child restraints on urban roads were 52.25, 28.63, and 46.67, respectively. In contrast, the value of this index for speeding was 76.24, 37.00, and 62.23, respectively, for rural roads. Conclusions: On the basis of the different scenarios considered in this research, we suggest focusing on future interventions to decrease the prevalence of speeding, the non-use of child restraints, the use of cell phones while driving, and helmet disuse, and the laws related to these items should be considered seriously.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.1
• /
• pp.65-72
• /
• 2003

The prevention of marine accidents has been a major topic in marine society and various policies and countermeasures have been developed, applied to the industries. In order to improve the navigational safety level in the coastal waterways, the navigational safety level must be evaluated from the mariner's perception of safety. So far as human beings are concerned, there are many types of fuzziness in the evaluation of navigational safety level. In order to reflect these fuzziness on this evaluation, this paper introduces the fuzzy integral suggested by Choquet to represent the fuzziness in the evaluation process. This paper aims to develop the method for this evaluation from the viewpoint of mariner's operational stress using the fuzzy measure and Choquet integral. In this paper, Korean coastal area is divided into 8 sectors and evaluated the priority for the needs of coastal VTS and navigational aids. The results are found in the order named Mokpo, Yosu, Pohang, Inchon, Busan, Geoje, Gunsan, Donghae coastal area.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.69-75
• /
• 2004

The prevention of marine accidents has been a major topic in marine society and various policies and countermeasures have been developed, applied to the industries. The coastal VIS and navigational aids are considered as one of the effective methods to promote marine safety but they need relatively huge amount of budgets to build Thus prior to establishing these coastal VIS and navigational aids, it should be evaluated the navigational risk level in the coastal waterways from the Environmental Stress. So far as human beings are concerned, there are many types of fuzziness in the evaluation of navigational safety level. In order to reflect these fuzziness on this evaluation, this paper introduces the fuzzy integral suggested by Choquet to represent the fuzziness in the evaluation process. This paper aims to develop the method for this evaluation from the viewpoint of mariner's operational stress using the fuzzy logic and Choquet integral. In this paper, Korean coastal area is divided into 8 sectors and evaluated the priority for the needs of coastal VIS and navigational aids.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.2
• /
• pp.111-115
• /
• 2009

As shown in the accident analysis from 2007, it has been found that causes of accidents on large-scale projects are different from those found in general construction projects. A 300-question survey regarding systematic and practical aspects of safety problems at construction sites was distributed to ten (10) different companies. Participants were to respond subjectively, so that the results could be used to assemble the first formal questionnaire survey. They were collected and compiled by an advisory committee for this study. The resulting surveys were then sent to the division chiefs of the top 100 construction companies in Korea, in order to improve the response rate. The Department of Safety & Health Direction, and the :Ministry of Labor, ROK sent the same sheets to medium and small construction companies that placed within 101-200th of all Korea construction companies. The above safety engineers were classified into four (4) levels, from 1st to 4th, followed by the project dollar amount and risk level. Formulae were developed to assign safety engineers to construction sites by engineer level, the project dollar amount, and the project risk level. Conclusions are summarized as follows: 1) Reviewing the assignment system of experienced safety engineers to large scaled projects - The more experienced the engineers assigned to a project, the higher the level of accident prevention. 2) Enforcing the assignment of advanced level safety engineers to large-scaled sites - At least one advanced-level safety engineer should be assigned to construction sites with projects valued at $15million USD (15,000,000,000). 3) For assigning safety engineers by risk level - Twenty models have been developed to calculate the number of safety engineers to be assigned by risk level. In the future, risk level for each job should be established by the government (as is now the practice in Germany).

• Korean Journal of Human Ecology
• /
• v.7 no.3
• /
• pp.59-71
• /
• 2004

The purpose of this study is to emboss the importance of safety education by recognizing the instructor's thoughts on safety and the prevention of safety accidents of early-childhood through the examination, analysis of the education site of safety at early-childhood education facilities. The subject of this were 120 early-childhood teachers in the Jeonbuk areas. The data were collected using questionaries and analyzed by the statistical methods of frequencies. ANOVA with SPSS pc program. The research questions were as follows; 1. What is the understanding of early-childhood teachers on safety recognition? 2. Is there a difference in the understanding of the teacher on safety and the management of the education curriculum on safety education that is being taught at early-childhood education facilities? The main results and solutions of this study were as follows: 1. In order for early-childhood teachers to teach safety education in early-childhood education facilities, they must join a safety mutual aid association or join an insurance policy to furnish an appropriate compensation system. Also, safety education must be systematically taught at a $social{\cdot}national$ level so that teachers and young children can have an understanding on safety under the support and concern of early-childhood education facilities and administration authorities. 2. Results on the comparison of the understanding of safety education and management of actual education of teachers on the actual conditions of the education curriculum of safety education show that although teachers are aware of most items of safety education but the actual education was not being taught. This means that although the teachers are aware of the importance of safety education, the actual education is not being taught.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.1
• /
• pp.137-147
• /
• 2017

An accident during pilotage may cause several problems such as crippling the harbour function, environmental disruption, loss of life. Since the pilot plays an important role in the safe operation of the port, securing their safety is directly connected to the vessel's safety coming into port in Korea. Pilotage service is offered on request without distinction of day and night. And traveling by helicopter and boarding/disembarking using a pilot ladder from and to a pilot boat have a high risk of falling into the sea. So, pilots can fall into the sea while boarding/disembarking from ship which can lead to serious injury by cardiac arrest. A number of pilots have died or severely injured due to fall from the pilot ladder during embarkation and disembarkation up to now. Current safety measures at embarkation and disembarkation required by pilotage act and IMO resolutions could not prevent all the pilot related accidents. Therefore, to prevent pilot accident during boarding/disembarking from ship, it is necessary to include safety training requirement for new pilots under the requirements for licensing of pilotage act. It is also necessary to compel pilots to take necessary personal protective equipment when they use a pilot ladder. In addition, the placement of emergency kit on pilot boats and first-aid training are required in order to deal with emergency situation promptly.

• Nuclear Engineering and Technology
• /
• v.45 no.6
• /
• pp.721-730
• /
• 2013

Within the framework of the ASTRID project, core design studies are being conducted by the CEA with support from AREVA and EDF. The pre-conceptual design studies are being conducted in accordance with the GEN IV reactor objectives, particularly in terms of improving safety. This involves limiting the consequences of 1) a hypothetical control rod withdrawal accident (by minimizing the core reactivity loss during the irradiation cycle), and 2) an hypothetical loss-of-flow accident (by reducing the sodium void worth). Two types of cores are being studied for the ASTRID project. The first is based on a 'large pin/small spacing wire' concept derived from the SFR V2b, while the other is based on an innovative CFV design. A distinctive feature of the CFV core is its negative sodium void worth. In 2011, the evaluation of a preliminary version (v1) of this CFV core for ASTRID underlined its potential capacity to improve the prevention of severe accidents. An improved version of the ASTRID CFV core (v2) was proposed in 2012 to comply with all the control rod withdrawal criteria, while increasing safety margins for all unprotected-loss-of-flow (ULOF) transients and improving the general design. This paper describes the CFV v2 design options and reports on the progress of the studies at the end of pre-conceptual design phase 1 concerning: - Core performance, - Intrinsic behavior during unprotected transients, - Simulation of severe accident scenarios, - Qualification requirements. The paper also specifies the open options for the materials, sub-assemblies, absorbers, and core monitoring that will continue to be studied during the conceptual design phase.