• Journal of the Korean Data and Information Science Society
• /
• 제12권1호
• /
• pp.127-133
• /
• 2001

In this article we establish multivariate cumulative sum (CUSUM) control charts based on residual vector with correlated observations. We first find the residual vector and its expectation and variance-covariance matrix and then evaluate the average run length (ARL) of the control charts.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2002년도 춘계학술대회
• /
• pp.141-149
• /
• 2002

In this paper, we propose EWMA control charts using the life time data for the system with the constant failure rate, which were drawn from the fixed sampling interval without replacement (with replacement), and investigate the power of detection of EWMA by comparing ARL of EWMA control charts with one of Shewhart control charts.

• Journal of the Korean Data and Information Science Society
• /
• 제15권4호
• /
• pp.793-801
• /
• 2004

In this paper, we propose control charts for failure rate using the number of failures based on the fixed interval inspection with replacement. And we investigate the power of detection of the proposed control charts by the ARL.

• 품질경영학회지
• /
• 제26권2호
• /
• pp.51-60
• /
• 1998

Exponetially weighted moving average(EWMA) control chart to simultaneously monitor correlation coefficients of several correlated quality variables under multivariate normal process are proposed. Performances of the proposed control charts are measured in terms of average run length(ARL) by simulation. Numerical results show that smaller values of smoothing constant are more efficient in terms of ARL.

• Communications for Statistical Applications and Methods
• /
• 제12권2호
• /
• pp.265-273
• /
• 2005

In this paper, we proposed multivariate EWMA control charts for both combine-accumulate and accumulate-combine approaches to monitor dispersion matrix of multiple quality variables. Numerical performance of the proposed charts are evaluated in terms of average run length(ARL). The performances show that small smoothing constants with accumulate-combine approach is preferred for detecting small shifts of the production process.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 춘계학술대회
• /
• pp.313-318
• /
• 2006

Many control charting methods for both i.i.d and autocorrelated data can be viewed as charting the output of a linear filter applied to the process data. We propose a generalization of this concept, in which the filter parameters are optimally selected to minimize the out-of-control ARL while constraining the in-control ARL to some desired value. A number of interesting characteristics of the optimal fitters are discussed.

• Journal of the Korean Data and Information Science Society
• /
• 제27권6호
• /
• pp.1487-1498
• /
• 2016

관리도를 사용하여 공정을 관리할 때, 일반적으로 공정 모수의 정확한 값은 알 수 없기 때문에 제1국면의 표본을 통하여 이를 추정해서 사용하고 있다. 또한 추정된 공정 모수를 이용하여 관리도를 설계하는 경우 관리한계는 관리상태에서의 런길이의 평균인 ARL (average run length)이 미리 지정한 값을 만족하도록 설정하고 있다. 그러나 런길이의 분포는 일반적으로 치우쳐져 있기 때문에, 런길이의 평균 대신 중위수를 사용하는 것이 바람직할 수 있다. 이 논문에서는 제1국면에서 추정한 모수를 사용하는 경우 부그룹의 크기에 따른 $\bar{X}$ 관리도의 성능에 대해 연구하였고, 이때 공정 평균에 대한 추정량은 전체 표본평균을 사용하고 공정 표준편차에 대해서는 5가지 추정량을 사용하여 이에 대한 영향을 살펴보았다. 기존 연구와 다른 점은 여러 가지의 부그룹 크기에 대해 모수 추정의 영향을 ARL 대신 런길이의 중위수인 MRL (median run length)에 기초하여 살펴보았으며, 두 가지 방법에 대해 그 결과를 비교하였다.

• 품질경영학회지
• /
• 제33권3호
• /
• pp.126-134
• /
• 2005

This paper proposes a selectively cumulative sum(S-CUSUM) control chart for detecting shifts in the process mean. The basic idea of the S-CUSUM chart is to accumulate previous samples selectively in order to increase the sensitivity. The S-CUSUM chart employs a threshold limit to determine whether to accumulate previous samples or not. Consecutive samples with control statistics out of the threshold limit are to be accumulated to calculate a standardized control statistic. If the control statistic falls within the threshold limit, only the next sample is to be used. During the whole sampling process, the S-CUSUM chart produces an 'out-of-control' signal either when any control statistic falls outside the control limit or when L -consecutive control statistics fall outside the threshold limit. The number L is a decision variable and is called a 'control length'. A Markov chain approach is employed to describe the S-CUSUM sampling process. Formulae for the steady state probabilities and the Average Run Length(ARL) during an in-control state are derived in closed forms. Some properties useful for designing statistical parameters are also derived and a statistical design procedure for the S-CUSUM chart is proposed. Comparative studies show that the proposed S-CUSUM chart is uniformly superior to the CUSUM chart or the Exponentially Weighted Moving Average(EWMA) chart with respect to the ARL performance.

• Communications for Statistical Applications and Methods
• /
• 제22권5호
• /
• pp.519-530
• /
• 2015

The geometric chart has proven more effective than Shewhart p or np charts to monitor the proportion nonconforming in high-quality processes. Implementing a geometric chart commonly requires the assumption that the in-control proportion nonconforming is known or accurately estimated. However, accurate parameter estimation is very difficult and may require a larger sample size than that available in practice in high-quality process where the proportion of nonconforming items is very small. Thus, the error in the parameter estimation increases and may lead to deterioration in the performance of the control chart if a sample size is inadequate. We suggest adjusting the control limits in order to improve the performance when a sample size is insufficient to estimate the parameter. We propose a linear function for the adjustment constant, which is a function of the sample size, the number of nonconforming items in a sample, and the false alarm rate. We also compare the performance of the geometric charts without and with adjustment using the expected value of the average run length (ARL) and the standard deviation of the ARL (SDARL).

• 한국컴퓨터정보학회논문지
• /
• 제25권12호
• /
• pp.187-194
• /
• 2020

오늘날 반도체나 석유 화학 공정과 같이 프로세스 중심의 산업에서는 관측된 자료들 사이에 자기 상관이 존재한다. 자기상관이 존재하는 공정에 대한 관리 방법으로는 관측치를 이용하여 뱃치 평균이 독립에 가까워지도록 뱃치를 구성하여 관리하거나, 관측치의 EWMA (지수 가중치 이동 평균) 통계량을 EWMA 관리도에 적용하는 방법등이 주로 사용되고 있다. 본 논문에서는 관찰치에 대한 관리 방법으로 일반적으로 사용되는 UBM 의 뱃치 크기를 결정하는 방법을 소개하고, ARL(평균 실행 길이)을 기반으로 최적 뱃치 크기를 정하는 방법과 그러한 뱃치 구성에서 공정의 표준 편차를 추정하는 방법을 제안 한다. 자기상관이 존재하는 공정에 대한 개선된 관리도를 제안하고자 한다.