1 |
Chang, T. C. and Gan, F. F. (2001). Cumulative sum charts for high yield processes, Statistica Sinica, 11, 791-805.
|
2 |
Goh, T. N. (1987). A control chart for very high yield processes, Quality of Assurance, 13, 18-22.
|
3 |
Goh, T. N. and Xie, M. (1994). New approach to quality in a near-zero defect environment, Total Quality Management, 5, 3-10.
|
4 |
Jensen, W. A., Jones-Farmer, L. A., Champ, C. W. and Woodall, W. H. (2006). Effects of parameter estimation on control chart properties: A literature review, Journal of Quality Technology, 38, 349-364.
|
5 |
Jones, M. A. and Steiner, S. H. (2012). Assessing the effect of estimation error on the risk-adjusted CUSUM chart performance, International Journal for Quality in Health Case, 24, 176-181.
DOI
ScienceOn
|
6 |
Jones-Farmer, L. A.,Woodall,W. H., Steiner, S. H. and Champ, C.W. (2014). An overview of phase I analysis for process improvement and monitoring, Journal of Quality Technology, 46, 265-280.
DOI
|
7 |
Lee, J., Wang, N., Xu, L., Schuh, A. and Woodall, W. H. (2013). The effect of parameter estimation on upper-sided Bernoulli CUSUM charts, Quality and Reliability Engineering International, 29, 209-223.
DOI
ScienceOn
|
8 |
McCool, J. and Joyner-Motley, T. (1998). Control charts applicable when the fraction nonconforming is small, Journal of Quality Technology, 30, 240-247.
|
9 |
Nelson, L. S. (1994). A control chart for parts-per-million nonconforming items, Journal of Quality Technology, 26, 239-240.
|
10 |
Steiner, S. H. and MacKay, R. J. (2004). Effective monitoring of processes with parts per million defective: A hard problem!, In H. J. Lenz and P. Wilrich (Eds.), Frontiers in Statistical Quality Control 7, Physica-Verlag, Heidelberg, 140-149.
|
11 |
Szarka, J. L. and Woodall, W. H. (2011). A review and perspective on surveillance of Bernoulli processes, Quality and Reliability Engineering International, 27, 735-752.
DOI
ScienceOn
|
12 |
Yang, Z., Xie, M., Kuralmani, V. and Tsui, K.-L. (2002). On the performance of geometric charts with estimated control limits, Journal of Quality Technology, 34, 448-458.
|
13 |
Tang, L. C. and Cheong,W. T. (2004). Cumulative conformance count chart with sequentially updated parameters, IIE Transactions, 36, 841-853.
DOI
ScienceOn
|
14 |
Woodall, W. H. (1997). Control charts based on attribute data: bibliography and review, Journal of Quality Technology, 29, 172-183.
|
15 |
Xie, M. and Goh, T. N. (1997). The use of probability limits for process control based on geometric distribution, International Journal of Quality & Reliability Management, 14, 64-73.
DOI
ScienceOn
|
16 |
Zhang, M., Peng, Y., Schuh A., Megahed F. M. and Woodall, W. H. (2013). Geometric charts with estimated control limits, Quality and Reliability Engineering International, 29, 209-223.
DOI
ScienceOn
|