• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.321-322
• /
• 2008

주파수는 발전기 조속기와 전적거래소 EMS AGC의 협조제어 체계가 적절하여야 안정적인 운영이 가능하며, 과다한 주파수 조정은 경제급전을 저해함은 물론 발전기의 수명단축을 초래하기 때문에 AGC 최적튜닝은 필수적이다. 본 논문에서는 '07년도에 거래소 계통운영처에서 수행한 AGC 제어파라미터 튜닝기법 및 효과에 대해 논하고 있으며, 학계는 물론 동종업계에 AGC 관련 기술개발시 업무추진에 도움이 되었으면 한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.150-157
• /
• 1999

As the customer demands thickness quality stricter, new techniques of automatic thickness control(AGC), is adopted to continuous cold rolling mills. The cold rolling mills of Pohang Works have revamped the existing conventional AGC system that control the thickness at all-stands automatically by the mass flow AGC based on the measurement of strip-speed and thickness between mill stands. The No. 2 Cold Rolling Mill be has adopted the New AGC system since Oct. 1995, and The No.1 Cold Rolling Mill since June. 1999. Thanks to the New AGC system, precise control of thickness is possible not only at constant rolling speed region, but also during line speed up and down. This report describes application techniques of the New AGC system and performance of the system.

• 한국전자파학회논문지
• /
• 제15권6호
• /
• pp.567-572
• /
• 2004

본 논문은 무선통신 시스템에서 사용되는 자동이득조절(AGC) 알고리즘에 관한 것이다. AGC 설계는 적합한 analog-to-digital converter(ADC)의 선정과 analog-to-digital 변환 과정에서 발생되는 양자화 잡음을 최소로 하기 위해 ADC로 입력되는 신호 전력을 일정하게 유지시키는 것을 포함한다. 본 논문은 요구되는 ADC의 정밀도를 결정하는 과정을 설명하고 AGC 설계 parameter들을 결정하는 방법을 제시한다. 또한 모의실험을 통해 제시한 알고리즘의 타당성을 검증한다.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권11호
• /
• pp.540-547
• /
• 2005

One of the roles of AGC is to regulate the frequency of power systems. AGC is also used to control the frequency of Korean Power System. AGC control strategies depend on system characteristics and the requirements of the systems to which those are applied. Korean Power System consists of one control area and does not have tie-lines. In this research, an AGC control strategy is suggested to avoid conflict with governor dynamics and to enhance frequency recovery It shows good performance for regulation and frequency recovery. This control strategy is expected to be applied to New EMS in KPX to get reasonable AGC regulation and frequency recovery performance.

• 한국통신학회논문지
• /
• 제34권7C호
• /
• pp.706-714
• /
• 2009

본 논문에서는 VDL(VHF Digital Link) Mode-2 D8PSK 변조 방식에 적용 가능한 Burst Mode AGC Loop와 Preamble 검출기를 제안하고 구현한 결과를 제시하였다. 일반적으로 AGC 방법은 연속 모드와 버스트 모드로 구분할 수 있다. 연속모드는 아날로그 피드백 방법으로도 우수한 성능을 얻을 수 있다. 그러나 연속모드에서 사용한 AGC 루프를 버스트 모드에 적용하는 것은 곤란하며 응답속도가 빼른 디지털 AGC 루프가 적합하다. 버스트 모드 통신에서 수신기의 AGC 루프는 휴지 구간에서 최대 이득을 갖도록 설계해야 신호 레벨이 작을 때에도 버스트의 존재 여부를 알 수 있다. 만약 버스트 시작 위치에 프리앵블이 있을 경우 버스트 구간에서 AGC 루프가 충분한 응답 속도를 갖지 못하면 프리엠블 시작점에서 수 심벌구간 동안 신호가 포호(saturation) 된다. 이렇게 되면 프리앵블 검출에 실패하거나 검출이 되었다 하더라도 프리앵블을 이용빼 복조 시에 필요한 각종 파라미터 추정에 영향을 미쳐 원하는 성능을 얻기 어려워진다. 본 논문에서는 이런 이유에서 AGC 루프와 프리엠블 검출기와의 연관성을 분석하고 버스트 모드에 적합한 AGC 루프와 프리앵블 검출기에 대해서 기술한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.354-356
• /
• 2002

In this paper a technical consideration is made on the AGC operation under the wholesale market in Korea in view of the signal connection between EMS and power plants for AGC. We review the market rules related AGC operation first. Then we investigate the current AGC connection to measure the level of the satisfaction for the every term in the rules.

• 전자공학회논문지B
• /
• 제31B권10호
• /
• pp.73-81
• /
• 1994

It is AGC(Automatic Gain Control) amplifier to decide characteristics of IF(Intermediate Frequency) processing IC. When demodulated IF signal by PLL type demodulator, the amplitude of input singla should be maintained at a certain amplitude. The AGC amplifier is an important factor to achieve this condition. The AGC amplifier needs the wide dynamic range, the wide AGC range and better noise characteristics. We designed the AGC amplifier to satisfy these characteristics.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.922-930
• /
• 1999

This paper describes a new 14-CPU real-time distributed automatic gauge control (AGC) system for POSCO's No. 2 Hot Strip Mill at Pohang Works. The new AGC system has adopted gaugemeter AGC, Monitor AGC, and roll gap disturbance compensators. The computer system for the new AGC system has been developed based on VMEbus computer systems and a commercial real-time operating system. A VMEbus computer system is also used for the position servo control of hydraulic cylinders. All the application programs and input/output signals have been reasonably distributed over the control computer systems for the maximum reliability and effectiveness of the system. The new AGC system has been successfully used for the No. 2 Hot Strip Mill.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.168-171
• /
• 2003

Generally RF AGC (Roll Force Automatic Gauge Control) controls the roll gap using the variation of rolling force caused by the roll eccentricity and the entry thickness of material, but RE AGC takes the bad effect of the roll eccentricity. The Feed-forward (FF) AGC method, which controls the next stand roll gap by the estimation of the thickness variation due to skid mark is needed to supplement the shortage of RF AGC. In this paper, an adaptive filtering method which takes account of the kind of material, the final objective thickness and the rolling speed is proposed to predict skid mark thickness variation. In addition, an improved estimation method of control point using a speedometer and looper angle is suggested. Via on line test, the performance improvement of the suggested FF AGC method is verified.

• Journal of Electrical Engineering and Technology
• /
• 제6권1호
• /
• pp.42-47
• /
• 2011

Automatic generation control (AGC) is an important function for load frequency control, which is being implemented in Energy Management System (EMS). A key feature of AGC is to back up governors to enhance the performance of frequency control. The governor regulates system frequency in several to ten seconds, while the droop control concept results in steady-state control error. AGC is a supplementary tool for compensation of the steady-state error caused by the droop setting of the governors. As the AGC target is delivered to each generator as an open loop control target, the generator output is not guaranteed to follow the AGC target. In this paper, we introduce generating unit controller (GUC) control block, which has the purpose of enabling the generator output to track the AGC target while maintaining the governor performance. We also address the tuning methods of GUC for better performance of AGC in the Korea Energy Management System (K-EMS).