• Clinical and Experimental Pediatrics
• /
• v.49 no.12
• /
• pp.1348-1353
• /
• 2006

Purpose : The reticuloendothelial system is composed of sinusoidal capillaries, through which even large protein molecules are freely movable between plasma and interstitial space, including the lymphatic system. Therefore, high-dose intravenous immunoglobulin (IVIG) would cause a redistribution of proteins between two compartments. To investigate this hypothesis, we measured plasma protein and lipid levels in patients with Kawasaki disease before and after high-dose IVIG treatment. Methods : Thirty four children with Kawasaki disease who had complete responses to high-dose IVIG treatment (1 g/kg/day for two consecutive days), were analyzed. Before and after the administration of IVIG, serum analyses were performed for such parameters as total protein, albumin, ${\gamma}$-globulins (IgG, IgM, IgA), ${\alpha}1-$, ${\alpha}2-$, and ${\beta}-$ globulin fractions, and lipid profiles (total cholesterol, HDL-cholesterol, LDL-cholesterol and triglyceride). Results : The levels of ${\gamma}$-globulins including IgG, IgM, IgA were significantly increased, and IgG was increased by $1,779{\pm}304mg/dL$ after two-dose of IVIG infusion. The levels of albumin, ${\alpha}1-$, ${\alpha}2-$, and ${\beta}$ globulin fractions were significantly decreased by 18 percent, 24 percent, 19 percent and 12 percent, respectively. HDL-cholesterol level was significantly decreased by 20 percent, while LDL-cholesterol and triglyceride levels were significantly increased by 21 percent and 50 percent, respectively. The total cholesterol level was not changed. Conclusion : High-dose IVIG treatment decreased the levels of a variety of proteins except immunoglobulins, and the increase of IgG after IVIG treatment was lower than expected. Our results suggest that a part of infused IVIG and plasma proteins, including etiologic proteins for Kawasaki disease, may be distributed to the extravascular compartments. The rapid improvement of symptoms induced by IVIG in Kawasaki disease might be explained by this mode of action of IVIG.

• Composites Research
• /
• v.15 no.4
• /
• pp.23-31
• /
• 2002

The two dimensional size effect of specimen gauge section ($length{\;}{\times}{\;}width$) was investigated on the compressive behavior of a T300/924 $\textrm{[}45/-45/0/90\textrm{]}_{3s}$, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm{\;}and{\;}90mm{\;}{\times}{\;}90mm$ gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• Microbiology and Biotechnology Letters
• /
• v.39 no.4
• /
• pp.382-386
• /
• 2011

Microbial fuel cells (MFC), devices that use bacteria as a catalyst to generate electricity, can utilize a variety of organic wastes as electron donors. The current generated may differ depending on the organic matter concentrations used, when other conditions, such as oxidant supply, proton transfer, internal resistance and so on, are not limiting factors. In these studies, a single-cathode type MFC (SCMFC) and dual-cathode type MFC (DCMFC) were used to ascertain the current's improvement through an increase in the contact area between the anode and the cathode compartments, because the cathode reaction is one of the most serious limiting factors in an MFC. Also an MFC was conducted to explore whether an improvement in electricity generation resulted from oxidizing the carbon sources and nitrates. About 250 mg $L^{-1}$ sodium acetate was fed to an anode compartment with a flow rate of 0.326 mL $min^{-1}$ by continuous mode. The current generated from the DCMFC was higher than the value produced from MFC with a single cathode. COD removal of dual-cathode MFC was also higher than that of single-cathode MFC. The nitrate didn't affect current generation at 2 mM, but when 4 and 8 mM nitrate was supplied, the current in the single-cathode and dual-cathode MFC was decreased by 98% from $5.97{\pm}0.13$ to $0.23{\pm}0.03$ mA and $8.40{\pm}0.23$ to $0.20{\pm}0.01$ mA, respectively. These results demonstrate that increasing of contact area of the anode and cathode can raise current generation by an improvement in the cathode reaction.

• Atmosphere
• /
• v.12 no.4
• /
• pp.20-42
• /
• 2002

Based on the "Mid to Long Term Plan for Space Development", a project to launch COMeS (Communication, Oceanography, and Meteorological Satellite) into the geostationary orbit is undergoing. Accordingly, KMA (Korea Meteorological Administration) has defined the meteorological missions and prepared the user requirements to fulfill the missions. To make a realistic user requirements, we prepared a first draft based on the ideal meteorological products derivable from a geostationary platform and sent the RFI (request for information) to the sensor manufacturers. Based on the responses to the RFI and other considerations, we revised the user requirement to be a realistic plan for the 2008 launch of the satellite. This manuscript introduces the revised user requirements briefly. The major mission defined in the revised user requirement is the augmentation of the detection and prediction ability of the severe weather phenomena, especially around the Korean Peninsula. The required payload is an enhanced Imager, which includes the major observation channels of the current geostationary sounder. To derive the required meteorological products from the Imager, at least 12 channels are required with the optimum of 16 channels. The minimum 12 channels are 6 wavelength bands used for current geostationary satellite, and additional channels in two visible bands, a near infrared band, two water vapor bands and one ozone absorption band. From these enhanced channel observation, we are going to derive and utilize the information of water vapor, stability index, wind field, and analysis of special weather phenomena such as the yellow sand event in addition to the standard derived products from the current geostationary Imager data. For a better temporal coverage, the Imager is required to acquire the full disk data within 15 minutes and to have the rapid scan mode for the limited area coverage. The required thresholds of spatial resolutions are 1 km and 2 km for visible and infrared channels, respectively, while the target resolutions are 0.5 km and 1 km.

• Cartoon and Animation Studies
• /
• s.50
• /
• pp.101-130
• /
• 2018

Since the advent of the Smart Devices, the smartphone has become a popular tool to view Webtoon. This phenomenon has caused the convergence of cutting-edge technologies and Webtoons in diverse forms, creating unique versions of Webtoons including, but not limited to Smart-toon, Effect-toon, Cut-toon, Dubbing-toon, Moving-toon, AR-toon, VR-toon, and Interaction-toon. By comparison to these rich diversities of Webtoons in the online industry, there is a lack of academic research on this topic. There are some papers which talk about the different types of multimedia technology conversion and its case presentation or the effectiveness and problems of visual effect, but the effects of these convergence technologies on comic readers' concentration and reading effectiveness have never been investigated so far. Therefore, this paper will discuss the unique method of immersive storytelling that is often used in comics and analyze each aspects of immersive method in technology-converged Webtoons along with its problems. Furthermore, this paper will analyze different aspects of "immersion" and interaction elements that can be found in the popular Interaction-toon, (Encountered). Through this, this paper discusses the positive influence of the interaction elements on comic readers' immersion level and its limitation. To classify the technology-converged Webtoons in terms of the immersion level, the Effect-toon sometimes interferes viewer's flow by using excessive use of multimedia effect, creating information overload. The Smart-toon which applied motions to each frame under horizontal mode of smartphones was a good try, but it hindered the readers' activeness and made it hard for the readers to be fully absorbed in the story. The VR-toon, which utilizes virtual reality gadgets to allow viewers to explore the world of Webtoon was also a nice try to overcome the limitation of vertical screens. However, it often caused dispersion of user's attention and reduced the users' immersion level. The Moving-toon which only emphasized the reading convenience also invaded readers' activeness and disturb users' concentration. On the other hand, the cartoonist Il-Kwon Ha applied high technologies such as face recognition technology, augmented reality techniques, 360-degree panorama technology, and haptic technology to his cartoon (Encountered). This allowed the readers to form a sense of closeness towards the cartoon characters which let the readers to identify themselves with the characters and interact with them. By this way, the readers can be fully immersed in the story. However, technology abuse, impractical production and hackneyed storylining often showed later in the story remains as its limitations.

• Journal of agricultural medicine and community health
• /
• v.34 no.1
• /
• pp.24-33
• /
• 2009

Objectives: In September 2008, an outbreak of diarrhea occurred among students attending Y school in Yeongcheon-si. Shigella sonnei was cultured from some of the rectal swabs. An epidemiological investigation was carried out to determine the source of the infection and the mode of transmission of the shigellosis outbreak. Methods: The index case lived in the D rehabilitation facility in Gyeongsan-si and an additional epidemiological investigation was carried out there. The cases could not be questioned due to their mental handicaps. The teachers were interviewed instead. A patient case was defined as a resident with diarrhea more than one time a day from September 18 to September 26, 2008 or a resident with confirmed Shigella sonnei at the Y school or the D rehabilitation facility. Results: The attack rate was 1.2% (8 persons) among 659 persons in the Y school and D rehabilitation facility. Five persons were microbiologically confirmed to have the infection and three persons were diagnosed on the basis of symptoms. Shigella sonnei was cultured from five of the 659 rectal swabs. However, 80 environmental specimens including drinking water, preserved foods, and cooking utensils were negative. All eight patients were Y school students and had been living in group boarding and lodging. Six of them lived in the D rehabilitation facility and two lived in the dormitory at the Y school. Five cases showed pulsed-field gel electrophoresis patterns that were identical for Shigella sonnei. Conclusions: The results of this study showed that the infection source of the shigellosis outbreak, in the two places, were identical. It is likely that the infections initially spread from a teacher or volunteer and then among the students.

• Journal of Food Hygiene and Safety
• /
• v.35 no.4
• /
• pp.382-390
• /
• 2020

This study was carried out to evaluate the antimicrobial effect of red ginseng (Panax ginseng C.A. Meyer) against several foodborne pathogens including Staphylococcus aureus, Escherichia coli, Candida albicans and Aspergillus niger. The antimicrobial effect was determined by agar diffusion method using red ginseng extract, crude saponin and non-water-soluble fractions. Red ginseng extract showed antimicrobial effect against S. aureus, but not C. albicans or A. niger. The extract showed anti-bacterial activity at concentration above 30% against S. aureus, which cause both food poisoning and atophic dermatitis. Crude saponin showed antibacterial activity above 7.5% against the bacterium. However, the ginsenosides purified from crude saponin showed no antimicrobial activities at 100-200 ㎍/mL. To investigate the mode of growth inhibition, red ginseng extract and crude saponin were added to 0.85% NaCl solution containing S. aureus and then incubated at 35℃ for 12 h. The results showed that viable cells were rapidly reduced in above 10% concentration of red ginseng extract and above 2% of crude saponin, respectively. However, the crude saponin and red ginseng extract did not inhibit the bacterial cells completely at those same concentrations. On the other hand, whereas all non-water-soluble fractions showed inhibition zones above 10 mm against S. aureus, they showed no inhibition effects against E. coli, C. albicans or A. niger. The methanol fraction-1 (MF-1) showed the highest antibacterial activity against S. aureus, and the MIC (minimal inhibitory concentration) was 0.625 mg/mL. These results suggest that red ginseng extract, crude saponin and non-water-soluble fractions show selective antibacterial activity against S. aureus, and non-water-soluble fractions might be used as natural antibacterial agents.

• Journal of the Korean Geographical Society
• /
• v.31 no.4
• /
• pp.662-671
• /
• 1996

Since the world's economic and political structures have changed, the term 'globlization' has shown up as a dominant power and as a necessity for regional and national development. Each nation is responding to the globalization process economically and politically in various ways. In general, however, the economic response to the globalization is economic restructuring from the Fordist industries to 'flexible specialization'. And the political response to the globalization is 'global localization' as a new type of local politics(i.e., local policy activism or growth-enhancing local development policies). The crisis of Fordism shifted the role of local governments towards more involovement with local economic development. Local governments are mobilizing for loca economic development, they are taken into a process of institutional change that tends to redefine their responsibilities inside the state. Local governments thus tend to act as an entrepreneur in order to restructure theiir local economies and to compete with other national and international regions. State restructuring towards enerepreneurialism and efficient regional policy pursuing a pro-growth coalition trategy is chosen as a new mode of regulation for the post-Fordism at the local level. The flexible specialization as the post-Fordist economy and the local government as an entrepreneur are the global choice for globalization and a post-Fordist society. The paper focuses on the regulation theory which comprises the political economic perspective on resturcturing. Economic restructuring and state restructuring will be discussed in detail. And the paper tries to combine the economic globalization and the global localization as economic and political responses to globalization.

• Radiation Oncology Journal
• /
• v.26 no.4
• /
• pp.280-288
• /
• 2008

Purpose: To identify the inter-fractional shift pattern and to assess an adequate treatment margin in the radiotherapy of a liver tumor using mega-voltage computed tomography (MVCT) of a tomotherapy unit. Materials and Methods: Twenty-six patients were treated for liver tumors by tomotherapy from April 2006 to August 2007. The MVCT images of each patient were analyzed from the $1^{st}$ to the $10^{th}$ fraction for the assessment of the daily liver shift by four groups based on Couinard's proposal. Daily setup errors were corrected by bony landmarks as a prerequisite. Subsequently, the anterior-, posterior-, right-, and left shifts of the liver edges were measured by maximum linear discrepancies between the kilo-voltage computed tomography (KVCT) image and MVCT image. All data were set in the 2-dimensional right angle coordinate system of the transverse section of each patient's body. Results: The liver boundary shift had different patterns for each group. In group II (segment 2, 3, and 4), the anterior mean shift was $2.80{\pm}1.73\;mm$ outwards, while the left mean shift was $2.23{\pm}1.37\;mm$ inwards. In group IV (segment 7 and 8), the anterior-, posterior-, right-, and left mean shifts were $0.15{\pm}3.93\;mm$ inwards, $3.15{\pm}6.58\;mm$ inwards, $0.60{\pm}3.58\;mm$ inwards, and $4.50{\pm}5.35\;mm$ inwards, respectively. The reduced volume in group II after MVCT reassessment might be a consequence of stomach toxicity. Conclusion: Inter-fractional liver shifts of each group based on Couinard's proposal were somewhat systematic despite certain variations observed in each patient. The geometrical deformation of the liver by respiratory movement can cause shrinkage in the left margins of liver. We recommend a more sophisticated approach in free-breathing mode when irradiating the left lobe of liver in order to avoid stomach toxicity.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.307-313
• /
• 2010

One-dimensional cubic phase silicon carbide nanowires (${\beta}$-SiC NWs) were efficiently synthesized by thermal chemical vapor deposition (TCVD) with mixtures containing Si powders and nickel chloride hexahydrate $(NiCl_2{\cdot}6H_2O)$ in an alumina boat with a carbon source of methane $(CH_4)$ gas. SEM images are shown that the growth temperature (T) of $1,300^{\circ}C$ is not enough to synthesize the SiC NWs owing to insufficient thermal energy for melting down a Si powder and decomposing the methane gas. However, the SiC NWs could be synthesized at T>$1,300^{\circ}C$ and the most efficient temperature for growth of SiC NWs is T=$1,400^{\circ}C$. The synthesized SiC NWs have the diameter with an average range between 50~150 nm. Raman spectra clearly revealed that the synthesized SiC NWs are forming of a cubic phase (${\beta}$-SiC). Two distinct peaks at 795 and $970 cm^{-1}$ in Raman spectra of the synthesized SiC NWs at T=$1,400^{\circ}C$ represent the TO and LO mode of the bulk ${\beta}$-SiC, respectively. XRD spectra are also supported to the Raman spectra resulting in the strongest (111) peaks at $2{\Theta}=35.7^{\circ}$, which is the (111) plane peak position of 3C-SiC. Moreover, the gas flow rate of 300 sccm for methane is the optimal condition for synthesis of a large amount of ${\beta}$-SiC NW without producing the amorphous carbon structure shown at a high methane flow rate of 800 sccm. TEM images are shown two kinds of the synthesized ${\beta}$-SiC NWs structures. One is shown the defect-free ${\beta}$-SiC NWs with a (111) interplane distance of 0.25 nm, and the other is the stacking-faulted ${\beta}$-SiC NWs. Also, TEM images exhibited that two distinct SiC NWs are uniformly covered with $SiO_2$ layer with a thickness of less 2 nm.