Characterization of SiC nanowire Synthesized by Thermal CVD

One-dimensional cubic phase silicon carbide nanowires (${\beta}$-SiC NWs) were efficiently synthesized by thermal chemical vapor deposition (TCVD) with mixtures containing Si powders and nickel chloride hexahydrate $(NiCl_2{\cdot}6H_2O)$ in an alumina boat with a carbon source of methane $(CH_4)$ gas. SEM images are shown that the growth temperature (T) of $1,300^{\circ}C$ is not enough to synthesize the SiC NWs owing to insufficient thermal energy for melting down a Si powder and decomposing the methane gas. However, the SiC NWs could be synthesized at T>$1,300^{\circ}C$ and the most efficient temperature for growth of SiC NWs is T=$1,400^{\circ}C$. The synthesized SiC NWs have the diameter with an average range between 50~150 nm. Raman spectra clearly revealed that the synthesized SiC NWs are forming of a cubic phase (${\beta}$-SiC). Two distinct peaks at 795 and $970 cm^{-1}$ in Raman spectra of the synthesized SiC NWs at T=$1,400^{\circ}C$ represent the TO and LO mode of the bulk ${\beta}$-SiC, respectively. XRD spectra are also supported to the Raman spectra resulting in the strongest (111) peaks at $2{\Theta}=35.7^{\circ}$, which is the (111) plane peak position of 3C-SiC. Moreover, the gas flow rate of 300 sccm for methane is the optimal condition for synthesis of a large amount of ${\beta}$-SiC NW without producing the amorphous carbon structure shown at a high methane flow rate of 800 sccm. TEM images are shown two kinds of the synthesized ${\beta}$-SiC NWs structures. One is shown the defect-free ${\beta}$-SiC NWs with a (111) interplane distance of 0.25 nm, and the other is the stacking-faulted ${\beta}$-SiC NWs. Also, TEM images exhibited that two distinct SiC NWs are uniformly covered with $SiO_2$ layer with a thickness of less 2 nm.

열 화학기상증착법을 이용한 탄화규소 나노선의 합성 및 특성연구

본 연구에서는 열 화학기상증착법(thermal chemical vapor deposition)을 이용하여 분말 형태의 규소(Si)와 염화니켈 수화물 $(NiCl_2{\cdot}6H_2O)$을 혼합한 후 탄소공급원인 $CH_4$ 가스를 주입하여 탄화규소 나노선(SiC nanowire)을 합성하였다. 합성 온도와 $CH_4$ 가스 유량 변화에 따른 탄화규소 나노선의 구조적 특성을 분석한 결과, 합성온도가 $1,400^{\circ}C$, $CH_4$ 가스의 유량이 300 sccm인 경우가 탄화규소 나노선의 합성에 최적화된 조건임을 라만 분광법(Raman spectroscopy)과 X-선 회절(X-ray diffraction), 주사전자현미경(scanning electron microscopy), 그리고 투과전자현미경(transmission electron microscopy) 분석을 통해 확인하였다. 합성된 탄화규소 나노선의 직경은 약 50~150 nm이며, 곧은 방향성과 높은 결정성을 가지는 입방구조(cubic structure)를 지니고 있었다.