• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.5
• /
• pp.519-526
• /
• 2021

In this paper, an array antenna for LOS datalink for mounting UAV(Unmanned Aerial Vehicle) of low-probability of intercept is presented. For low RCS, radome was designed by conformal form, and other components were inserted into the UAV. The antenna of the transmitter and receiver are each composed of 12×12 array antennas, and include a beam steering function by controlling the phase of the unit element for the Uni-directional pattern and the Bi-directional pattern. As a result of the measurement of the manufactured antenna, it was confirmed that all the required specifications were met, and the installing possibility of the UAV platform on low-probability of intercept in the future was confirmed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.2
• /
• pp.197-204
• /
• 2023

The importance of each warfighting function for Army TIGER unit attack drones is measured using the AHP technique. As a result, the importance of attack drones is high in the order of maneuver, firepower, intelligence, command/control, protection, and operation sustainment, but the importance of maneuver, firepower, and intelligence are almost similar. In addition, it is analyzed that attack drones capable of carrying out day and night missions by being equipped with an EO/IR sensor and being commanded/controlled in conjunction with the C4I system to eliminate threats with small bombs or aircraft collisions is needed. Finally, based on the results of this study, a virtual battle scenario for attack drones is proposed.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.43-51
• /
• 2020

The main purpose of protective facility for small military unit is to provide the protection of not all the weapons system but the near-miss bullet in Korean army. In particular about the small caliber bullets, especially KM80 in Korea, there were many studies that both of the experiential and structural design methods dose not reflect enough the military threat. For that reason, a new equation to calculate effective anti-piercing depths for RC slabs against small caliber bullets is proposed in earlier research with actual shooting test. But, the test only considers the strength of concrete without the thickness of concrete, types of aggregate, the angle of yaw of bullet, high-strength concrete, etc. Therefore, this study evaluated the ballistic resistance performance by thickness and proportion of magnetic aggregate of concrete. As a result, we identified two major statistical estimations that the error of piercing depth by the angle of yaw of bullet could be cancelled by barrage and the thickness and proportion of magnetic aggregate of concrete dose not effect on the protection ability of concrete structure.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.109-113
• /
• 2015

Combat vehicles need an air-conditioning unit, although new combat systems tend to use an integrated system for heating, cooling, and ventilating. The specifications of an air-conditioning unit depend on the combat vehicle's purpose. It is difficult to send cooling air from the air-conditioning unit to a gun turret through the drum basket because the gun turret rotates and consists of a closed anti-aircraft shell magazine. In this study, we considered an air-conditioning unit for armored combat vehicle based on the special requirements and military specifications. We evaluated the performance of the air-conditioning unit despite the rotating gun turret through analysis and tests in terms of flow improvement compared to the previous model.

• Convergence Security Journal
• /
• v.13 no.2
• /
• pp.195-202
• /
• 2013

Defense reform our military for the globalization of information. Scientific command structure, troop structure, unit structure, step-by-step into the power structure while promoting a history of quantitative-oriented structure, and structure of the quality of state-of-the-art technology-driven transition in the middle of the bottle numberplans about the current 3.3-fold increase in reducing the cadre(officers and NCOs). NCO groups in the executive, especially expanding the current level of 100% increase in the rate of long-serving, while ensuring a stable job and to superior resources to secure a stable policy through science. Military alliance is now underway. In the midst of this group, and urged the group at the University of the leading military and specialized resources to ensure each agreement required by subjects to reflect. Thus effectively improve the quality of education and the demands of the job analysis, DACUM curriculum development methods and procedures can be applied at the time of urgent need for foster an excellent resource for the discharge of curriculum development at the University of Selected as a core job, career, and job classification configuration inside of Duty according to KST derived from the group reflect on the training courses to meet the requirements in the curriculum through the development of curriculum, job definition, job model set to propose.

• Journal of Trauma and Injury
• /
• v.36 no.4
• /
• pp.376-384
• /
• 2023

Purpose: The Armed Forces Trauma Center of Korea was established in April 2022. This study was conducted to report our 1-year experience of treating soldiers with open fractures of the lower extremity. Methods: In this case series, we reviewed the medical records of 51 Korean soldiers with open fractures of the lower extremity between April 2022 and March 2023 at a trauma center. We analyzed patients with Gustilo-Anderson type II and III fractures and reported the duration of transportation, injury mechanisms, injured sites, and associated injuries. We also presented laboratory findings, surgery types, intensive care unit stays, hospital stays, rehabilitation results, and reasons for psychiatric consultation. Additionally, we described patients' mode of transport. Results: This study enrolled nine male patients who were between 21 and 26 years old. Six patients had type II and three had type III fractures. Transport from the accident scene to the emergency room ranged from 75 to 455 minutes, and from the emergency room to the operating room ranged from 35 to 200 minutes. Injury mechanisms included gunshot wounds, landmine explosions, grenade explosions, and entrapment by ship mooring ropes. One case had serious associated injuries (inhalation burn, open facial bone fractures, and hemopneumothorax). No cases with serious blood loss or coagulopathies were found, but most cases had a significant elevation of creatinine kinase. Two patients underwent vascular reconstruction, whereas four patients received flap surgery. After rehabilitation, six patients could walk, one patient could move their joints actively, and two patients performed active assistive movement. Eight patients were referred to the psychiatry department due to suicidal attempts and posttraumatic stress disorder. Conclusions: This study provides insights into how to improve treatment for patients with military trauma, as well as medical services such as the transport system, by revising treatment protocols and systematizing treatment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.3
• /
• pp.244-252
• /
• 2015

This paper describes design and construction results of the measurement system developed on the purpose of measuring properties of AC magnetic field sensors used in the weapon system. The system for measuring the properties of AC magnetic field sensors consist of 3-axis helmholtz coil, signal generator, signal amplifier, sensor data acquisition unit and AC magnetic field sensor property measurement & analysis equipment including the operating software. By using this system, we can measure various properties of AC magnetic field sensor such as sensitivity, linearity and dynamic response in the frequency from 1 Hz to 10 kHz. Finally we also verified its performance by measuring the property of a MAG 639, standard magnetic field sensor of bartington instruments, with the developed measurement system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.2
• /
• pp.111-120
• /
• 2012

Built-In-Test is a design feature in more and more advanced weapon system. During development test and evaluation(DT&E) it is critical that the BIT system be evaluated. The BIT system is an integral part of the weapon system and subsystem. Built-In-Test assists in conducting on system and subsystem failure detection and isolation to the Line Replaceable Unit(LRU). This capability reduces the need for highly skilled personnel and special test equipment at organizational level, and reduces maintenance down-time of system by shortening Total Corrective Maintenance Time. During DT&E of weapon system the objective of BIT system evaluation is to determine BIT capabilities achieved and to identify deficiencies in the BIT system. As a result corrective actions are implemented while the system is still in development. Through the use of the reiterative BIT evaluation the BIT system design was corrected, improved, or updated, as the BIT system matured.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.218-226
• /
• 2016

In the original design of K2 tank the Vertical Sensor Unit(VSU) was mounted to measure the attitude of the main gun to enhance the hit probability. In this research, as a part of efforts to reduce the cost of K2, it was theoretically simulated and evaluated to use the data from Inertial Navigation System(INS) for the calculation of the gun attitude instead of the direct measurement using VSU. It was found that the negative effect of INS approach is negligible and the elimination of VSU is technically possible and beneficial to the system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.2
• /
• pp.217-224
• /
• 2018

The purpose of this study is to evaluate the future potential value of CTE(Critical Technology Element)s that are evaluated to be low in TRA(Technology Readiness Assesment) and to present investment prioritization technologies in defense R&D(Research and Development) based on them. To do this, we used the DEA(Data Envelopment Analysis) method, which is useful in evaluating the efficiency of the organization. Specifically, we suggest a systematic framework to evaluate the future value of CTEs by setting the CTEs derived from the TRA process to DMU(Decision Making Unit)s, the cost and time required to develop each CTE as the input factor of the DEA and the effects of the development of each CTE as the output factor of the DEA respectively. We also conducted an illustrative case study on radar technologies to demonstrate the usefulness of the proposed approach.