• Journal of Korea Technology Innovation Society
• /
• v.7 no.3
• /
• pp.641-656
• /
• 2004

L Company is producing the second sept pin, Shadow Mask which is the chief part of CRT in W, Monitor. Inside of the CRT pan, Shadow Mask leads the electronic beam to express the three primary colors; red, green, blue, and it is the core part to embody the colors. In the etching process, it produces this part with manufacturing by eroding the iron chloride. Even though the iron chloride is harmless to human body. it is necessary to diminish the amount of it on the view of preservation of environment. In addition, by studying the method of the dispossed liquid process, cutting down the manufacturing cost is a necessary task on the aspect of reconsideration of competitive business. This study shows the case that through the six sigma innovation activity, it reforms the following the former processing flow, and it reduces the amount of it by improving the efficiency of the iron chloride. By rationalization of the standard requirement cooperative company, it could cut down the manufacturing cost in the cooperative company, so it could promote the common profits.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.55
• /
• pp.13-24
• /
• 2000

6 sigma movement is the most prominent quality improvement methodology in practice. Measurement plays an important role in helping any organization improve quality. Therefore, the measurement systems analysis is the first step for the quality improvement of manufacturing process in 6 sigma movement. In this study, we investigate the effect of Gage Repeatability and Reproducibility(Gage R&R) in view of defect rate and process capability indices, and provide guidelines for acceptance of gage repeatability and reproducibility(%R&R) for six sigma quality.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.121-140
• /
• 2005

In Korea, an enterprise usually operates two kinds of similar innovative activities at the same time and the same place. The activities make medium and small enterprises incur conflicts of taske and wastes of resources. The solutions for cooperation of the activities, Single PPM and 6 Sigma, are increasing the competency and efficiency of the medium and small enterprises in Korea.

• Journal of Korean Society for Quality Management
• /
• v.27 no.1
• /
• pp.211-222
• /
• 1999

6 Sigma is defined as the state of "defect free quality" with only 3.4 defective, goods out of 1 million. Samsung Display Device(SDD) was quick to embark on a new way of quality innovation. The goals of 6 Sigma campaign are established on the foundation of customer satisfaction such as quality, cost and service. Production field of SDD has a special 6 Sigma campaign, SQM(Standard Quality Management). Quality qualification system is introduced and implemented with strong reinforcement. C-S-I(Chart-Solve-Implement) model which was made by Dr. Bajaria(1991) is adopted for the project. All the workers of company will be encouraged to participate in the drive.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.51-57
• /
• 2015

In this paper, in order to design the A / D converter with a high resolution of 14 bits or more for the biological signal processing, CMOS delta sigma modulator that is a 1.8V power supply voltage - were designed. we propose a new structure of The fourth order delta-sigma modulator that needs four op amps but we use only two op amps. By using a time -interleaving technique, we can re-construct the circuit and reuse the op amps. Also, we proposed a KT/C noise reduction circuit to reduce the thermal noise from a noisy resistor. We adjust the size of sampling capacitor between sampling time and integrating time, so we can reduce almost a half of KT/C noise. The measurement results of the chip is fabricated using a Magna 0.18um CMOS n-well1 poly 6 metal process. Power consumption is $828{\mu}W$ from a 1.8V supply voltage. The peak SNDR is measured as a 75.7dB and 81.3dB of DR at 1kHz input frequency and 256kHz sampling frequency. Measurement results show that KT/C noise reduction circuit enhance the 3dB of SNDR. FOM of the circuit is calculated to be 142dB and 41pJ / step.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.6
• /
• pp.89-99
• /
• 2010

Military Barracks and Bachelor Officer's Quarters are public buildings representing architectural characteristics with repeating the same room modules. These buildings require easy dismantling and reusing for the next generation' military re-organization. For these reasons, since 2005, the modular construction has been applied to military buildings. The most important factors required for modular military buildings are standardization, lowcost construction and reusable construction method. However, conventional modular building system have not been matched with these requirements. This study suggests a new modular system for Bachelor Officer's Quarters using Six-sigma design tool. To reflect the voices of customers, market study and surveys were carried out. Through the QFD, the voices of customers were converted into quality characteristics of building system for BOQ. The various design concepts meeting customer's requirement were derived by the QFD and Pugh matrix methodology. The proposed modular building system shows 80% increased factory production rate and 62% decreased weight of steel frame as compared with the conventional modular building system.

• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.235-242
• /
• 1999

It is impossible to measure the fraction of the precipitates which are neither plenty nor distiguishable on micrographs, using point counting method or image analyzer. In this study, phase fraction of sigma, carbide and boride which are important to mechanical properties of Ni base superalloy Udimet 720 has been measured using a quantitative X-ray diffraction technique combined with electrochemical extraction. The alloys had been exposed at $800^{\circ}C$ for various times up to 3000 hours to have a variation of the amount of the minor precipitates. The amount of sigma had increased exponentially with increasing exposure time up to 3000 hours before saturation. It can be argued that the finishing point of precipitation is around 5000 hours and maximum amount of sigma to be produced is about 5% in weight. The amounts of $M_{23}C_6$ and $M_3B_2$ were maintained constant at the level of 0.1~0.5% in weight, regardless of exposure time.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.322-330
• /
• 2007

Because 6sigma is doing innovative success In management whole, estimate that can exert direct effect in interior Design management. Therefore, this study did by purpose that 6sigma that is scientific method that do customers satisfaction by ultimate purpose acts as basic study that can heighten practical use Possibility and result of interior Design management and value by interior design standardization process. Need to use marketing data that is scientific design component at schematic design step for successful interior design that can improve result. Hereupon, this study is doing to big dimension that utilizes 6sigma and makes standard process of only Interior Design, and did to dimension that present study phase verifies if '6sigma' is practical use possibility by intoner design process. Did by method that verification method of 6sigma practical use possibility analyzes "Information transmission efficiency improvement of department store display space" 6sigma project example. When see that example project is analyzed on Improvement constituent that "Design improvement" out of Vital few Xs of statistical analysis item must heighten the customers satisfaction rate conclusively, target process might be established because design becomes center of gravity if did design improvement very first time. Finally, possibility that 6sigma can utilize in process of interior design is verified, and it is scientific methodology that can utilize to all business members that there are not any special category of business even if is in practical use. Such scientific 6sigma method need persistent study that make standard process analyzing a lot of problems that is expected to be beaconed and happens substantially in here after to management development of interior design.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2009.10a
• /
• pp.48-56
• /
• 2009

최근 제품 경쟁력 향상을 위하여 품질혁신 활동이 가속화되고는 있으나, 많은 기업들이 6시그마 활동의 경험 부족과 원리를 잘 파악하지 못하여 지속적인 추진력이 저하되고 있는 실정이다. 본 연구에서는 고객이 가장 중요하게 생각하는 CTQ's의 정확한 선정을 통하여 품질 혁신활동의 지속적 추진과 이를 통한 고객 만족도 향상으로 경영에 기여하는 활동이 되도록 제시하고자 하였다.

• Journal of Korean Society for Quality Management
• /
• v.31 no.1
• /
• pp.1-10
• /
• 2003

In 1999, Six Sigma was introduced into Korea and after that it had general influence on company-wide management system. Quality Circles apply the various quality problem solving techniques such as QC 7 Tool, New QC 7 Tool, and statistical methods to rationalization, improvement in the shop floor. This paper empirically investigates the effects of Six Sigma on Quality Circles by analyzing the difference of problem solving technique's use. The number of teams employed in this study is 342, which participate in National Quality Circles Contest from 1997 to 2002 in Korea.