• Korean Journal of Organic Agriculture
• /
• v.26 no.3
• /
• pp.489-500
• /
• 2018

Rural Development Administration (RDA) is promoting the AFACI IPM (Asian Food & Agricultural Cooperation Initiative program). AFACI consist of 12 countries including Bangladesh, Cambodia, Thailand, Vietnam and so on. The main goal of the AFACI IPM project is 'Establishment of an international cooperative network for the best management of migratory rice planthoppers and setting data-base of pests occurrence information. As a result of the suvey, Planthoppers were increasing all the way from tillering stage to ripe stage and do not appear to be peak of one or two like korea case. In detail, 1,673 of BPH (Nilaparvata lugens) occurred in survey site of Svay Reang, Cambodia, followed by 1.237 at Dobila, Bangladesh. In the case of White backed planthopper (Sogatella furcifera), 1,163 of WBPH occurred in survey site of Dobila, Bangladesh and 849 WBPH were collected at Hamkuria, Bangladesh. It is expected to verify the occurrence and movement patterns of hoppers among member countries in the future.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.6
• /
• pp.1082-1089
• /
• 2012

Objectives : The aim of this study was to determine the accuracy of digitized stone models, impression materials compared to the master model and the reliability of the computer aided analysis. Methods : A master model(500B-1, Nissin dental product, Japan) with the prepared lower full arch tooth was used. Ten vinyl polysiloxane impressions(Examix$^{(R)}$, GC Industrial Corp, Japan) of master model were taken and type IV stone(aesthetic-base gold$^{(R)}$, Dentona, Germany) were poured in stone models. The linear distance between the reference points were measured and analyzed on the Delcam Copycad$^{(R)}$(Delcam plc, UK). The t-student test for paired samples was used for statistical analysis. Results : The mean differences to master model for stone model and impression material were 0.11~0.19mm, and 0.19~0.29mm, respectively. There were statistical differences in dimensional accuracy for full arch impression between master model and stone model/impressions(p<.05). Conclusions : Two different scanning methods showed clinically acceptable accuracy of full arch digital impression produced by them. These results will have to be confirmed in further clinical studies.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.230-232
• /
• 2019

Light Triggerd Thyristor (LTT)는 HVDC 및 산업용 스위치 등에 사용되는 대전력 반도체소자이다. 일반적인 Thyristor가 전기적 신호에 의해 trigger 되는 것과는 다르게 LTT는 광신호에 의해 동작하는 소자이다. 본 논문에서는 5,000V, 2,200A 급의 4인치 LTT 소자의 제작 및 전기적인 특성평가 결과를 기술하였다. 4인치 LTT의 구조적인 특징은 전면부 중앙에 광신호가 주입되는 수광부가 위치해 있으며 입력 전류 증폭을 위한 4-단계 증폭 게이트 (gate) 구조를 가지도록 설계하였다. $400{\Omega}{\cdot}cm$ 비저항을 갖는 1mm 두께의 n-형 실리콘 웨이퍼에 boron 이온주입과 열처리 공정으로 약 $30{\mu}m$ 깊이의 p-base를 형성하였으며, 고내압 저지를 위한 edge termination은 VLD (variable lateral doping) 기술을 적용하였다. 제작된 4인치 LTT는 6,500 V의 순방향 항복전압 ($V_{DRM}$) 특성을 나타내었으며, 100V의 어노드전압 ($V_A$)과 20 mA의 게이트전류 ($I_G$)에 의하여 thyristor가 trigger 됨을 확인하였다. 제작한 LTT 소자는 disk형 press-pack 패키지를 진행한 후, LTT의 수광부에 $10{\mu}s$, 50 mW의 900 nm 광 펄스를 조사하여 전류 특성을 평가하였다. LTT 패키지 샘플에 60 Hz 주파수의 광 펄스를 조사한 경우 2,460 A의 순방향 평균전류 ($I_T$)와 $336A/{\mu}s$의 반복전류상승기울기 (repetitive di/dt)에 안정적으로 동작함을 확인하였다. 또한, 펄스 전류 시험의 경우 61.6 kA의 최대 통전 전류 (ITSM, surge current)와 $1,050A/{\mu}s$의 펄스전류 상승 기울기 (di/dt of on-state pulse current)에도 LTT의 손상 없이 동작함을 확인하였다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.7
• /
• pp.1212-1217
• /
• 2004

The aim of this study was to investigate Quality characteristics of Pleurospermum kamtschaticum to increase the value of functional food resources. To examine Quality characteristics of Pleurospermum kamtschaticum, various factors such as color, texture, fiber, minerals, tannin, crude proteins, crude lipids and sensory quality, were determined using physicochemical methods. The contents of dietary fiber were 0.57％ and 0.54％ in each 100 g of leaf and stem parts (freeze drying base). In mineral content, potassium was the highest value in both of leaf and stem parts (freeze drying base). The contents of tannin were 108.1 $\mu$g/mL and 20.9 $\mu$g/mL in leaf and stem parts (fresh base) respectively. Blanching stems showed significant difference in hardness from freeze-drying leaves. The antioxidative activity in ethanol extracts of Pleurospermum kamtschaticum was investigated using peroxide value and free radical scavenging activity. Free radical scavenging activity in ethanol extracts of Pleurospermum kamtschaticum was 43.5％ in a 100 $\mu$g/mL level, and the antioxidative index was 1.09 in a 500 $\mu$g/mL level. For functional food using Pleurospermum kamtschaticum the contents of crude proteins and lipids were about 9％ and 26％, respectively. The results from sensory evaluation of each treatment older age showed a better acceptability.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.107-112
• /
• 2006

Free Radical Scavening and inflammatory of the methanol extracts, which were prepared from 6 difffrent bran of rice, were evaluated to investigate bioactive substances. Among them, the extract of C3GHibyeo and Heugjinjubyeo showed strong DPPH scavening activities (73.25% and 50.38% at 0.4 mg/ml, respectively). The extract of C3GHibyeo and Heugjinjubyeo showed strong thrombin inhibition activities (258.76% and 243.52% inhibition at 5 mg/ml, respectively). The result of antibacterial activity by Zone assay showed that C3GHi rice extract $(250{\mu}g\;and\;500{\mu}g)$ inhibited attachment of Helicobactor pylori on the ATCC48504 and COO1 cell line. But no effect on the SEO cell line. Cytotoxicity of blackish purple rice extract on the H. pylori doesn't showed. These result support a functional superiority of rice-base livelihood, and suggest that the development of healthy food using functional ingredients of rice is possible.

• Journal of Embryo Transfer
• /
• v.24 no.4
• /
• pp.289-292
• /
• 2009

Mongolia has 80% livestock of total agriculture industry, 170,000 farms are engaged, 2,500,000 of cows that were beef and dairy cows are raised. Despite of Mongolian has great application with milk, there are not clear differences between cow and dairy cattle, and the production of milk is also low. But the milk suppliers are varied (horse, sheep, goat, etc), so that the total milk production is 500 thousand ton per year. It's really considerable to improve the breed of owing to many problems with big differences among milk qualities. For carrying out for first year project, artificial insemination project was operated with 3rd grade Holstein semen that were imported from S. Korea, and initiation and field training were also carried out through appropriate AI technique we developed for Mongolia environment. Local information research and MOU conclusion were done with professor D. Altangerel in May $10^{th}{\sim}13^{th}$, 2009, and development for AI technique and AI equipments were supplied for Mongolia breeding and natural environment in July $10^{th}{\sim}17^{th}$ in 2009. All cows were treated by synchronization for AI. To do this, $PGF_{2\alpha}$ injection were treated for luteal phase cow, if it wouldn't work, try again after 11 days. After confirmation of estrus, AI and AI training were carried out with sperm injection in the uterus or cervix by rectum-vagina method which is common worldwide, the most effective artificial insemination technique. If cows were return to next estrus cycle, second AI was carried out about approximately 21 days after artificial insemination. After 2 months, all cows not showing return estrus should be taken pregnancy test. Every pregnant cow will be cared thoroughly. Total 48 cows administrated by $PGF_{2\alpha}$ for synchronization and after 48 hours 45 cows (93.8%) showing estrus were detected and then artificial inseminate them within who 8 cows (27.8%) showed return estrus. Therefore, Using $PGF_2{\alpha}$ for synchronization is effective to use for Mongolia breeding conditions. There are possibility of base for food production after all, including increase of livestock production in Mongolia by improvement of breeding cow with AI and embryo transfer project.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.275-281
• /
• 2006

Simple-relay aided resource allocation (SRARA) schemes are incorporated with throughput guarantee scheduling (TGS) in IEEE 802.16 type time division duplex - orthogonal frequency division multiple access (TDD-OFDMA) downlink in order to enhance service coverage, where the amount of resources for relaying at each relay is limited due to either its available power which is much smaller than base station (BS) power or the overhead required for exchanging feedback information. The performance of SRARA schemes is evaluated with schedulers such as proportional fair (PF) and TGS at 64kbps and 128kbps user throughput requirements when total MS power is set to 500mW or 1 W. For 64kbps throughput requirement level, more improvement comes from relay than scheduler design. For 128kbps case, it comse from scheduler design than relay due to the fact that simple relay can't help using strictly limited amount of resources for relaying function.

• Clinical and Experimental Pediatrics
• /
• v.55 no.1
• /
• pp.18-23
• /
• 2012

Purpose: Transforming growth factor beta receptor 2 ($TGFBR2$) is a tumor suppressor gene that plays a role in the differentiation of striated cells and remodeling of coronary arteries. Single nucleotide polymorphisms (SNPs) of this gene are associated with Marfan syndrome and sudden death in patients with coronary artery disease. Cardiovascular remodeling and T cell activation of $TGFBR2$ gene suggest that the $TGFBR2$ gene SNPs are related to the pathogenesis of Kawasaki disease (KD) and coronary artery lesion (CAL). Methods: The subjects were 105 patients with KD and 500 healthy adults as controls. Mean age of KD group was 32 months age and 26.6% of those had CAL. We selected $TGFBR2$ gene SNPs from serum and performed direct sequencing. Results: The sequences of the eleven SNPs in the $TGFBR2$ gene were compared between the KD group and controls. Three SNPs (rs1495592, rs6550004, rs795430) were associated with development of KD ($P$=0.019, $P$=0.026, $P$=0.016, respectively). One SNP (rs1495592) was associated with CAL in KD group ($P$=0.022). Conclusion: Eleven SNPs in $TGFBR2$ gene were identified at that time the genome wide association. But, with the change of the data base, only six SNPs remained associated with the $TGFBR2$ gene. One of the six SNPs (rs6550004) was associated with development of KD. One SNP associated with CAL (rs1495592) was disassociated from the $TGFBR2$ gene. The other five SNPs were not functionally identified, but these SNPs are notable because the data base is changing. Further studies involving larger group of patients with KD are needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.232-247
• /
• 2005

Purpose. The purposes of this investigation were to discover the possibility of clinical application in the areas of dental implants and bone grafts by investigating the bone formation histologically around specimen which was depending on the intensity of magnetic field of neodymium magnet inside of the specimens. Material and method. 1. Measurement of magnetic intensity - placed the magnet inside of the specimen, and measured the intensity of magnetic field around the 1st thread and 3rd thread of specimen 20 times by using a Gaussmeter(Kanetec Co., Japan). 2. Surgical Procedure - Male rabbit was anesthetised by constant amount of Ketamine (0.25ml/kg) and Rompun (0.25ml/kg). After incising the flat part of tibia, and planted the specimens of titanium implant, control group was stitched without magnet, while experimental groups were placed a magnedisc 500(Aichi Steel Co., Japan) or magnedisc 800(Aichi Steel Co., Japan) into it, fixed by pattern resin and stitched. 3. Management after the surgery - In order to prevent it from the infection of bacteria and for antiinflammation, Gentamycin and Ketopro were injected during 1 week from operation day, and dressed with potadine. 4. Preparation of histomorphometric analysis - At 2, 4 and 8 weeks after the surgery, the animals were sacrificed by excessed Ketamine, and then, specimens were obtained including the operated part and some parts of tibia, and fixed it to 10% of PBS buffer solution. After embedding specimens in Technovit 1200 and B.P solution, made a H-E stain. Samples width was 75$\mu$m . In histological findings through the optical microscope and using Kappa image base program(Olympus Co. Japan), the bone contact ratio and bone area ratio of each parts of specimens were measured and analyzed. 5. Statistical analysis - Statistical analysis was accomplished with Mann Whitney U-test. Results and conclusion. 1. In histomorphometric findings, increased new bone formation was shown in both control & experimental groups through the experiment performed for 2, 4 & 8 weeks. After 4 weeks, more osteoblasts and osteoclasts with significant bone remodeling were shown in experimental groups. 2. In histomorphometric analysis, the bone contact ratios were 38.5% for experimental group 1, 29.5% for experimental group 2 and 11.9% for control group. Experimental groups were higher than control group(p<0.05) (Fig. 6, Table IV). The bone area ratios were 60.9% for experimental group 2, 46.4% for experimental group 1 and 36.0% for control group. There was no significantly statistical difference between experimental groups and control group(p<0.05) (Fig. 8, Table VII) 3. In comparision of the bone contact ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group at the 1st thread (p<0.05) and experimental group 1 (1.8mT) was higher than control group at the 3rd thread(p<0.05) (Fig. 7, Table V, VI). 4. In comparision of the bone area ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group and experimental group 1 (4.0mT) at the 1st thread(p<0.1) and experimental group 2(4.4mT) was higher than experimental group 1 (1.8mT) at the 3rd thread(p<0.1) (Fig. 9, Table IX, X). Experiment group 2 was largest, followed by experiment group l and control group at the 3rd thread of implant. There was a significant difference at the 1st thread of control group & experiment group 2, and at 1st thread & 3rd thread of experiment group 1 & 2, and not at control group experiment group 1.(p<0.1)

• Journal of Nutrition and Health
• /
• v.51 no.2
• /
• pp.177-185
• /
• 2018

Purpose: This study analyzed the perception and importance of country-of-origin labeling at restaurants in 500 college students in Jeju surveyed from April 15 to May 5, 2016 with the aim of providing basic data. A total of 465 questionnaires out of 500 were used as base data for this study. Methods: The data were analyzed using descriptive analysis, ${\chi}^2-test$, and t-test using the SPSS Win program (version 21.0). Results: Regarding food safety-related dietary behaviors, average score was 3.65 points (out of 5), and 'put the food in a refrigerator or freezer immediately (4.07)' showed the highest score, whereas 'cool rapidly hot food prior to putting it in the refrigerator (3.08)' showed the lowest score. Regarding the awareness of country-of-origin labeling at restaurants, 67.5% of subjects were aware of it. With regard to dietary behavior of food safety, the high group showed a higher score than the low group (p < 0.001). Regarding reliability of the system, 4.9% of subjects indicated 'very reliable' and 45.4% 'somewhat reliable'. For perception of subject's country-of-origin labeling, the average score was 3.77 (out of 5). Regarding checking country-of-origin labeling at restaurants, 68.0% of subjects checked country-of-origin labeling, and the high group in the safety-related dietary behavior score ranking showed a higher rate (79.3%) than the low group (57.1%) (p < 0.001). With regard to importance by item, 'honest country-of-origin labeling of restaurants' showed the highest score at 4.27 (out of 5). Conclusion: It is necessary to provide continuing education for college students in order to enhance their perception of country-of-origin labeling at restaurants. Moreover, a systematic and appropriate support and control system by the government and local government needs to be developed in order to improve country-of-origin labeling at restaurants.