• Journal of Astronomy and Space Sciences
• /
• v.4 no.1
• /
• pp.25-33
• /
• 1987

For a geostationary satellite north-south keeping maneuver must control the inclination elements. The effects on the orbit plane of maneuvers and natural perturbations may be represented by a plane plot of Wc versus, Ws, since these inclination elements represent the projection of the major axis and the inclination elements are obtained.

• Review of KIISC
• /
• v.14 no.4
• /
• pp.19-26
• /
• 2004

웹 서비스는 인터넷 기술을 이용한 표준화된 오픈 네트워크를 통해 조직 내 및 조직간 모든 컴퓨터 시스템을 결합시키는 새로운 컴퓨팅 패러다임으로 자리 잡으면서, 기술과 서비스의 융합(Convergence), 표준화(Standardization)가 급속도로 진행되고 있다. 이러한 현상은 정보 및 서비스의 공유를 필수적으로 수반하므로, 프라이버시, 기밀성, 무결성, 인증, 및 접근제어 등과 같은 보안과 신뢰성에 대한 중요성을 부각시킨다. 현재 웹 서비스 보안기술은 W3C, OASIS, WS-I의 세 표준화 단체를 중심으로 표준화가 진행되고 있다. 본 논문에서는 각 표준화 단체에서 추진하고 있는 웹서비스 보안기술의 최근 동향을 분석한다.

• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.547-555
• /
• 2014

This study was carried out in order to investigate the germination and the early growth characteristics of Parasenecio firmus. Seed pre-treatment before the each experiment was carried out by shading treatment (with drying at room temperature (DRT), drying at low temperature (DLT) and water soaking (WS) for 48 hours). Experiment was performed by shading treatment (full sunlight, 35%, 50%, 75%, and 95% shading). Seeds of Parasenecio firmus were surveyed the highest germination rate (61.1%) in full sunlight with WS (overall 25.7~61.1%). Height was surveyed the highest under 95% shading. And root collar diameter was surveyed the highest in full sunlight. Fresh weights (leaf, shoot, root and total) were the highest under 50% shading. Dry weights (leaf, shoot and total) were the highest under 75% shading. It was indicated the lowest leaf, shoot, root and total under 95% shading. Leaf growth (leaf area, leaf length, leaf width and leaf thickness) and root growth (total root length, root project area, root surface area, root diameter and root volume) were good under 35%~75% shading, but the lowest under 95% shading. As a result of surveying the whole experiment, seed of Parasenecio firmus grows well under 50%~75% shading after germination by high sunlight with water soaking (WS).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.4
• /
• pp.470-475
• /
• 2006

In order to elucidate the differences of protein profiles among soybean cultivars, the protein composition of three conventional domestic soybean cultivars and two imported ones including glyphosate-tolerant HS2906 was analyzed by total nitrogen measurement, amino acid analysis and PAGE/densitometry. There were no statistically significant differences in the levels of any amino acid, including aromatic amino acids, between glyphosale-tolerant soybean and the conventional soybean WS82. In the extraction of protein, the SDS/buffer system was more efficient than the defatting/water system. The SDS-PAGE/densitometry analysis showed that there was a similar profile of proteins among cultivars, although the amount of total protein ranged from 380.2 mg/g to 423.9 mg/g. In addition, there was no discernable difference of protein profile between glyphosate- tolerant soybean (total protein amount, 380.2 mg/g) and the conventional soybean WS82 (390.2 mg/g), although the amount of ${\beta}$-conglycinin (55 kDa) was lower in glyphosate-tolerant soybean. Meanwhile, the amount of 25 kDa protein was greater in domestic soybean cultivars than imported ones. Thus, normal PAGE/ densitometry method would be useful to analyze the difference in protein profiles of soybean proteins, and furthermore Evaluate the protein profile of proteins between GMO and conventional soybean.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.4
• /
• pp.363-372
• /
• 2023

This study was developed to prepare hamburger steak (HS), wantang soup (WS), and tomato soup (TS) for senior-friendly seafood's (SFS) using bigeye tuna Thunnus obesus, and to investigate their quality characteristics. All data were presented in the order of HS, WS, and TS. The hardness values were 298.9×1.0³, 47.1×1.0³ and 14.9 ×1.0³ N/m², respectively. The viscosity of TS was 2,856 mPa·s. The protein contents were 13.8, 11.7, and 9.7 g/100 g, respectively. The fat-soluble vitamins content were as follows: vitamin A 21.88, 5.03, and 23.72 ㎍RAE/100 g; vitamin D 1.15, ND, and 1.81 ㎍/100 g, respectively. The water soluble vitamins contents were as follows: vitamin C 47.22, 32.83 and 37.01 mg/100 g; vitamin B₂ 0.17, 0.11 and 0.10 mg/100 g; vitamin B₃ 34.87, 34.76 and 54.62 mgNE/100 g. The Ca contents were 15.9, 16.8, 28.9 mg/100 g, and the K contents were 383.8, 167.4, and 300.0 mg/100 g, respectively. The dietary fiber was 0.04, 0.07 and 0.08 g/100 g, respectively. Escherichia coli was not detected in any of the products. These results suggest that the products should be classified as follows, based on their appropriateness as SFS: HS, WS and TS.

• The Journal of Society for e-Business Studies
• /
• v.11 no.3
• /
• pp.73-88
• /
• 2006

As a computerized application for controlling enterprise processes, BPM(Business Process Management) has been received such concerns that many solution vendors developed their own process definition and storage methods. The fact causes the needs of process modeling standards for process model exchange and at the same time, requires the appropriate methodology for adopting the global standards. In this paper, we propose a transformation methodology of BPMN-based file into XMI(XML Metadata Interchange)-based neutral file format. We devised translation templates for 21 workflow patterns, and compared the results with BPEL4WS(Business Process Execution Language for Web Services) translation. As a result, our XMI transformation model enables more complete translation of process model in comparison with existing model, and thus can be practically utilized to the BPM vendors adopting BPMN standards.

• Resources Recycling
• /
• v.7 no.2
• /
• pp.16-22
• /
• 1998

Recently, the new technology for the recycling of waste plastics as an alternative he1 of blast furnace ha been developed. In this shldy, the test of plastics injection into a tuyere af the foundry blast furnace were carried out. The injection rate of plastics far this tcst facility war expressed as follows, ${W}_{s}=0.265\frac{{delta}PA}{U}_{g}$, where. Ws, AP, A and Ug are plastic conveying ratc (kgisec), pressure drop between feed hopper and blaqt pressure (alm), cross sectional area of conveying pipe (mi) and superficial velocity of transport air (mhzc) respcctiuely. From the results of semi-continuous test operation during 96 hours, the replacement raho mned out to be 1.38 according to the injection rate of 6. 4 kg-plasticsit-p. With increasing the rate of plaslics injcchon, the content of hydrogen in top gas became increased and the brick temperahlre at bzlly was also increased due to Lhe changes ot the combustion zone shape.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.4
• /
• pp.505-514
• /
• 2015

This paper proposes a probabilistic generation assessment model of renewable energy generators(REGs) considering uncertainty of resources, mainly focused on Wind Turbine Generator(WTG) and Solar Cell Generator(SCG) which are dispersed widely in South Korea The proposed numerical analysis method assesses the one day-ahead generation by combining equivalent generation characteristics function and probabilistic distribution function of wind speed(WS) and solar radiation(SR) resources. The equivalent generation functions(EGFs) of the wind and solar farms are established by grouping a lot of the farms appropriately centered on Weather Measurement Station(WMS). First, the EGFs are assessed by using regression analysis method based on typical least square method from the recorded actual generation data and historical resources(WS and SR). Second, the generation of the REGs is assessed by adding the one day-ahead resources forecast, announced by WMS, to the EGFs which are formulated as third order degree polynomials using the regression analysis. Third, a Renewable Energy Generation Assessment System(REGAS) including D/B of recorded actual generation data and historical resources is developed using the model and algorithm predicting one day-ahead power output of renewable energy generators.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.495-502
• /
• 2018

In this study, the AERMOD air diffusing model was used to estimate the range of influence of Hazardous chemicals (hydrogen fluoride) in case of small accidents in Jeju area. The impact scope were in the order of Seogwipo Fire Station, Dongbu Fire Station, Jeju Fire Station, and Seobu Fire Station. Seasonal orders were summer, spring, autumn and winter. The correlation between the meteorological factors shows a strong positive correlation with the wind speed of 0.998 and has a negative correlation with the temperature of -0.463. Through the linear regression analysis, we could estimate the equation of Impact scope = 13.922WS (Wind Speed) - 5.195 and the reliability ($R^2$) was as high as 0.995.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.534-539
• /
• 2006

In the ozone disinfection unit process of a piston type batch reactor with continuous ozone analysis using a flow injection analysis (FIA) system, the CT values for 1 log inactivation of Cryptosporidium parvum by viability assays of DAPI/PI and excystation were $1.8{\sim}2.2\;mg/L{\cdot}min$ at $25^{\circ}C$ and $9.1mg/L{\cdot}min$ at $5^{\circ}C$, respectively. At the low temperature, ozone requirement rises $4{\sim}5$ times higher in order to achieve the same level of disinfection at room temperature. In a 40 L scale pilot plant with continuous flow and constant 5 minutes retention time, disinfection effects were evaluated using excystation, DAPI/PI, and cell infection method at the same time. About 0.2 log inactivation of Cryptosporidium by DAPI/PI and excystation assay, and 1.2 log inactivation by cell infectivity assay were estimated, respectively, at the CT value of about $8mg/L{\cdot}min$. The difference between DAPI/PI and excystation assay was not significant in evaluating CT values of Cryptosporidium by ozone in both experiment of the piston and the pilot reactors. However, there was significant difference between viability assay based on the intact cell wall structure and function and infectivity assay based on the developing oocysts to sporozoites and merozoites in the pilot study. The stage of development should be more sensitive to ozone oxidation than cell wall intactness of oocysts. The difference of CT values estimated by viability assay between two studies may partly come from underestimation of the residual ozone concentration due to the manual monitoring in the pilot study, or the difference of the reactor scale (50 mL vs 40 L) and types (batch vs continuous). Adequate If value to disinfect 1 and 2 log scale of Cryptosporidium in UV irradiation process was 25 $mWs/cm^2$ and 50 $mWs/cm^2$, respectively, at $25^{\circ}C$ by DAPI/PI. At $5^{\circ}C$, 40 $mWs/cm^2$ was required for disinfecting 1 log Cryptosporidium, and 80 $mWs/cm^2$ for disinfecting 2 log Cryptosporidium. It was thought that about 60% increase of If value requirement to compensate for the $20^{\circ}C$ decrease in temperature was due to the low voltage low output lamp letting weaker UV rays occur at lower temperatures.