• 대한조선학회지
• /
• 제23권2호
• /
• pp.1-13
• /
• 1986

The nonlinear hydrodynamic forces acting on a two-dimensional circular cylinder, oscillating with large amplitude in the free surface, are calculated by using the Semi-Lagrangian Time-Step-ping Method used by O.M. Faltinsen. In present calculation the position and the potential value of free surface are calculated using the exact kinematic and dynamic free surface boundary condition. At each time step an integral equation is solved to obtain the value of potential and normal velocity along the boundaries, consisting of both the body surface and the free surface. Some effort was devoted to the elimination of instability arising in the range of high frequency. Numerical simulations were performed up to the 3rd or 4th period which seems to be enough for the transient effect to die out. Each harmonic component and time-mean force are obtained by the Fourier transform of forces in time domain. The results are compared with others' experimental and theoretical results. Particularly, the calculation shows the tendency that the acceleration-phase 1st-harmonic component(added mass) increases as the motion amplitude increases and a reverse tendency in the velocity-phase 1st-harmonic component(damping coefficient). The Yamashita's experimental result also shows the same tendency. In general, the present result show relatively good agreement with the Yamashita's experimental result except for the time-mean force.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.207-209
• /
• 2019

This paper proposes a grid-tied photovoltaic (PV) system, consisting of Voltage-fed dual-active-bridge (DAB) dc-dc converter with single phase inverter. The proposed converter allows a small dc-link capacitor, so that system reliability can be improved by replacing electrolytic capacitors with film capacitors. The double line frequency free maximum power point tracking (MPPT) is also realized in the proposed converter by using Ripple Correlation method. First of all, to eliminate the double line frequency ripple which influence the reduction of DC source capacitance, control is developed. Then, a designing of Current control in DQ frame is analyzed and to fulfill the international harmonics standards such as IEEE 519 and P1547, $3^{rd}$ harmonic in the grid is directly compensated by the feedforward terms generated by the PR controller with the grid current in stationary frame to achieve desire Total Harmonic Distortion (THD). 5-kW PV converter and inverter module with a small dc-link film capacitor was built in the laboratory with the proposed control and MPPT algorithm. Experimental results are given to validate the converter performance.

• 한국통신학회논문지
• /
• 제28권10A호
• /
• pp.847-852
• /
• 2003

본 논문에서는 접지면에 PBG 및 Aperture의 기능을 하는 셀을 에칭함으로써 PBG에의한 광대역 저지대역 여파기특성을 이용하여 본래 스트립라인이 가지고 있는 하모닉 성분(Second, Third Harmonic and etc)을 억제하였으며, Aperture 특성에 의하여 밴드폭이 넓어지는 2가지 효과를 동시에 볼 수 있는 셀을 제안하였다. 대역통과 여파기는 결합 스트립 여파기를 사용하였다[l]. 대역통과여파기의 대역폭은 신뢰할 수 있는 길이인 0.2mm를 구현할 수 있도록 맞추어 설계하여 대역폭을 가능한 넓게 만들었고 기판은 유전율이 3.2인 기판을 사용하였다. 필터의 중심주파수는 2.14GHz, 대역폭은 230MHz를 얻었다. 이를 Aperture를 통해 310MHz까지 80MHz 즉, 34.7%까지 증가시켰으며 PBG를 통하여 하모닉성분(2nd, 3rd, 4th, 5th)을 20-30dB까지 억제하였다.

• Journal of Electrical Engineering and Technology
• /
• 제3권4호
• /
• pp.566-570
• /
• 2008

Vertical nanowire SGFETs(Surrounding Gate Field Effect Transistors) provide full gate control over the channel to eliminate short channel effects. This paper presents design and characterization of a differential pair amplifier using NMOS and PMOS SGFETs with a 10nm channel length and a 2nm channel radius. The amplifier dissipates $5{\mu}W$ power and provides 5THz bandwidth with a voltage gain of 16, a linear output voltage swing of 0.5V, and a distortion better than 3% from a 1.8V power supply and a 20aF capacitive load. The 2nd and 3rd order harmonic distortions of the amplifier are -40dBm and -52dBm, respectively, and the 3rd order intermodulation is -24dBm for a two-tone input signal with 10mV amplitude and 10GHz frequency spacing. All these parameters indicate that vertical nanowire surrounding gate transistors are promising candidates for the next generation high speed analog and VLSI technologies.

• 한국전자파학회논문지
• /
• 제15권6호
• /
• pp.560-566
• /
• 2004

본 논문은 6 ㎓의 주파수를 2체배 하여 12 ㎓의 신호원을 얻는 광대역 능동 주파수 2체배기를 PHEMT를 사용하여 제작하였다. 설계된 주파수 체배기는 핀치오프 영역의 바이어스점을 가지며, 동작주파수 영역에서 무조건 안정인 특성을 갖도록 하기 위하여 입력매칭단과 바이어스 라인 사이에 직렬 RC회로를 제안하였다. 측정 결과0 ㏈m의 입력전력에 대하여 12 KHz 1,7 ㏈m의 2차 고조파 출력을 얻었고, 6 ㎓에서 -27.5 dBc의 기본주파수 억압과 -18 ㏈c의 3차 고조파 억압특성을 보였으며, 1.8 ㎓의 3 ㏈ 대역폭을 나타내었다.

• 한국소음진동공학회논문집
• /
• 제14권5호
• /
• pp.410-415
• /
• 2004

To ensure a safe operation of the prototype KGT-74 kW small gas turbine, vibrational reliabilities of the compressor 1st, 2nd, and 3rd stages and turbine blades have been estimated and reviewed. FE analyses have been carried out to obtain the natural vibration characteristics of the blades, and impact modal testings have been performed on every each one of the blades to measure their 1st natural frequencies. Then, the Campbell diagram analyses have been carried out to judge the safety of the blades from resonant failures up to 6k harmonics. Results show that the compressor 1st stage blade is exposed to a potential resonant failure with 3k harmonic around a rated speed of 30,000 rpm but that the other compressor 2nd and 3rd stages and turbine blades are safe from resonant failures. Finally, 27,900 rpm is selected as the safe operation limit for the KGT-74 ㎾ gas turbine relative to the blade vibrations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.297-302
• /
• 2003

To ensure a safe operation of the prototype KGT-74 ㎾ small gas turbine, vibrational reliabilities of the compressor 1st, 2nd. and 3rd stages and turbine blades have been estimated and reviewed. FE analyses have been tarried out to obtain the natural vibration characteristics of the blades, and impact modal testings have been performed on every each one of the blades to measure their 1st natural frequencies. Then, the Campbell diagram analyses have been carried out to Judge the safety of the blades from resonant failures up to 6k harmonics. Results show that the compressor 1st stage blade is exposed to a potential resonant failure with 3k harmonic around a rated speed of 30,000rpm but that the other compressor 2nd and 3rd stages and turbine blades are safe from resonant failures. Finally. 27,900 rpm Is selected as the safe operation limit for the KGT-74 ㎾ gas turbine relative to the blade vibrations.

• 대한전자공학회논문지TC
• /
• 제44권7호통권361호
• /
• pp.12-16
• /
• 2007

본 논문은 일반적으로 고효율 특성을 가지고 있는 class-F 전력 증폭기의 출력 단에서 기생되는 2차 고조파 성분을 제거함으로 3차 IMD (Intermodulation distortion) 특성을 개선하였다. class-F 전력 증폭기의 경우 과부동 특성으로 인해 고효율을 얻을 수 있으나 선형성 측면에서는 많은 단점을 가지고 있다. 따라서 본 논문은 특별한 선형화 기술을 적용하지 않고 CMRC 구조를 적용하여 2차 고조파를 제거하여 선형성을 나타내는 U 특성을 개선하였다. CMRC 구조의 경우 광대역 저지대역 특성을 가지고 있으며 PBG 구조 보다 작은 크기로 더 좋은 특성을 얻을 수 있다.

• 한국전자파학회논문지
• /
• 제8권2호
• /
• pp.107-115
• /
• 1997

본 논문에서는 23 GHz 국간(Point-to-point) 통신용 Push-Push발진기를 Split Ring 공진기(Split Ring Resonator)를 사용하여 설계, 제작하였다. Split Ring 공진기(SRR)는 둥가회로를 이용한 이론적인 해석 및 MPIE(Mixed Potential Integral Equation)수칙해석 툴을 이용 해석하였다. 이 해석된 결과를 사용하여 전송 모드로 마이크로 스트립 라인과 결합된 SRR를 분석하였다. 제작된 발진기은 23 GHz에서 출력 전력은 4dBm, 기본 주파수 및 3차 고조파 억제는 - 20 dBc, - 34 dBc의 특성과 발진주파수에서 1 MHz offset에서 -109 d dEc/Hz의 SSB위상잡음 및 1.4%의 변환 효율을 나타내었다. 이 실험결과는 이론 및 시뮬레이션 결과와 일치함을 알 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.207-208
• /
• 2021

The non-destructive method using ultrasonic waves has been applied in many studies due to its low damage to the structure and its simple evaluation method and high precision. On the other hand, if the concrete is subjected to a high-temperature, the mechanical properties may be deteriorated due to the micro-crack network and the damage may be severe depending on the strength of the concrete. Therefore, this study attempts to evaluate the fundamental wave behavior of different strength ranges using the ultrasonic non-destructive method for concrete that has been subjected to high-temperature. As a result, the relative power of the fundamental wave was decreased as temperature increase. And it was confirmed that the 2nd and 3rd harmonics were generated at 110 MPa. However, to check the 2nd, 3rd harmonics 110 MPa or less, there is a need for further research considering the ultrasonic output, the output of the sender and receiver, and the appropriate frequency accordingly.