• The Korean Journal of Food And Nutrition
• /
• v.26 no.4
• /
• pp.831-840
• /
• 2013

In this study, an attempt is being made to extract surface-active substances from defatted rapeseed cakes by supercritical carbon dioxide fluid. Independent variables for the extraction process, being formulated by D-optimal design, are pressure (150~350 bar), temperature ($33{\sim}65^{\circ}C$ and co-solvent (ethanol, 50~250 g). The dependent variables of the extraction yield, the content of neutral lipids, phospholipids and glycolipids in the extracts were analyzed upon the results through the response surface methodology. As for the extraction yield, it was found to increase with increasing independent variables, among which the co-solvent proved to be a major influencing parameter. Similar trends were found for the content of surface-active substances (i.e, phospholipids and glycolipids) in the extracts, except for the content of neutral lipids. Regression equations were suggested to coincide well with the results from the experiments. Extraction conditions are being optimized to maximize the extraction yields, the content of phospholipids, and glycolipids were 350 bar (pressure), $65^{\circ}C$ (temperature) and 228.55 g (co-solvent), respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.9
• /
• pp.1288-1293
• /
• 2002

Four adult rams ($22.25{\pm}0.90kg$) were used in a $4{\times}4$ latin square design to evaluate the rations without ($T_1$) or with supplementation of sunflower acid oil at 5 ($T_2$), 10 ($T_3$) or calcium soap at 10% of dietary DM ($T_4$) on nutrient digestibility and balances of nitrogen, calcium and phosphorus. The basal ration contained 60 parts Brazilian napier grass hay and 40 parts concentrate mixture. The DM, CF, NDF and ADF digestibilities and nitrogen retention (g/d) decreased (p<0.01) by inclusion of sunflower acid oil at 5% of dietary DM. In addition, depression (p<0.01) in digestibilities of CP, nitrogen free extract (NFE), cellulose, hemicellulose, retention of calcium and phosphorus (g/d) were also observed with increasing the level of sunflower acid oil to 10% of dietary DM. The EE digestibility, total digestible nutrients (TDN) content and calcium retention (g/d) were significantly higher (p<0.01) for ration supplemented with calcium soap. It is concluded that sunflower acid oil supplementation in free form as low as 5% of dietary DM is deleterious to fibre digestion in sheep while as calcium soap, it can be fed up to 10% of dietary DM as an energy source without any adverse effect.

• Korean Journal of Materials Research
• /
• v.29 no.5
• /
• pp.288-296
• /
• 2019

The passivation of AZ91D Mg alloys through plasma anodization depends on several process parameters, such as power mode and electrolyte composition. In this work, we study the dependence of the thickness, composition, pore formation, surface roughness, and corrosion resistance of formed films on the electrolyte temperature at which anodization is performed. The higher the electrolyte temperature, the lower is the surface roughness, the smaller is the oxide thickness, and the better is the corrosion resistance. More specifically, as the electrolyte temperature increases from 10 to $50^{\circ}C$, the surface roughness (Ra) decreases from 0.7 to $0.15{\mu}m$ and the corrosion resistance increases from 3.5 to 9 in terms of rating number in a salt spray test. The temperature increase from 10 to $50^{\circ}C$ also causes an increase in magnesium content in the film from 25 to 63 wt% and a decrease in oxygen from 66 to 21 wt%, indicating dehydration of the film.

• Journal of Biosystems Engineering
• /
• v.13 no.3
• /
• pp.59-70
• /
• 1988

A computer simulation model for rice circulating concurrent-flow dryer was developed and verified by conduction a series of pilot-scale experiment. The effects of design parameter and operating conditions on dryer performance were analyzed by using simulation. The results indicated that the developed model was found suitable for analyzing operating characteristics. The other results from simulation also showed that; 1) an increse in the initial moisture content resulted in an increase in the drying rate and a reduction in the grain temperature and total energy requirements. 2) an increase in the drying air temperature resulted in an increase in the drying rate and grain temperature. 3) an increase in air flow rate resulted in an radical increase in drying rate, fan power requirements and total energy requirements but an radical decrease in final head rice yield. 4) an increase in the bed depth resulted in an increase in fan power requirements and a lowering of the final head rice yield.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.346-351
• /
• 2007

As the construction technology is rapidly advancing internationally, the necessity of virtual construction technology development is drastically demanded in the construction industry together with a fusion technology with information technology(IT). The construction technology will be changed as the paradigm of construction technology in the future. The establishment of building structural system in the virtual construction basis is necessary for the integration of construction process, and it will be expected to produce the effect of reduction of construction period and quality improvement through the environment of integration. This study is to present the analysis of the existing process of structural design, the content of research & development as per the building structural system on virtual construction basis and the direction of research.

• Journal of Korean Society of Disaster and Security
• /
• v.10 no.1
• /
• pp.19-27
• /
• 2017

In recent years, ground subsidence has been frequently occurred by underground cavities due to the excessive groundwater inflow, caused by poor construction and management, during tunnel excavation and underground structure construction. In this study, a numerical model (SEEFLOW3D) was developed to estimate groundwater fluctuations for saturated-unsaturated poros media, evaluates the impact on ground excavation with open cut and non-open cut scenarios. In addition, the visual MODFLOW was applied to demonstrate the verification of the model compared with both results. Our results indicated that the RMSE and NRMSE was obtained to range over -3.95~5.7% and 0.56~4.62%, respectively. The developed model was expected to estimate groundwater discharges and apply analysis tool for optimum design of waterproof wall in future.

• Journal of Korea Game Society
• /
• v.16 no.4
• /
• pp.69-78
• /
• 2016

With the development of game technology, the realistic game graphics, interface technology, and various content services with immersion are being required in the content area. NUI has been developed through CLI and GUI. Unlike the conventional methods, it is an interface that could be the intuitive and realistic interface for human as a natural action realized. we propose a boxing simulation game using leap motion of it. Providing a realistic 3D experimental environment through VR headsets game, we also propose a method that can be calculated the scores if the user-controlled interface (fist) could be to punch the target (sandbag) of the internal in accordance with changes of the angle of target impact with the physical characteristics.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.17 no.4
• /
• pp.1-11
• /
• 2021

In this paper, we explain the purpose of building a mobile app called "ARnetView" that can use the AR(augmented Reality)based calling function and AR based content creation function, and as well as an AR based data center that can share AR based video streaming and AR based contents on smartphones and tablet devices. For the AR(Augmented Reality) based data center implement, we have developed a mobile application and implemented a service system including an AR(augmented Reality) based calling function and AR based content production and AR based video streaming functions for real-time communication to connect a field technician and an expert so that the expert can see and discuss the situation in the field and technician and experts, they can draw digital annotation on mobile screen that accurately stick to 3D physical objects, allowing the expert to guide the technician step by step. In result, it provides a remote technical collaboration environment between field technician and expert. In addition, AR(Augmented Reality) collaboration service Platform was designed and implemented to increase work speed, efficiency, and utilization of advanced technicians, improve continuous productivity of equipment and facilities, maximize equipment and facility utilization, and strengthen industrial competitiveness. Therefore, through this, the AR collaboration service Platform can be applied to the industrial field, the medical field, and the entertainment/education field.

• Journal of Convergence for Information Technology
• /
• v.9 no.1
• /
• pp.92-98
• /
• 2019

Due to the development of hologram display technology, various studies are being conducted to provide realistic contents for augmented reality. In the case of the HMD for hologram, since augmented reality objects must be rendered by a small processor, it is necessary to use a low-capacity content. To solve this problem, there is a need for a technique of rendering resources by providing resources through a network. In the case of the existing augmented reality system, there is no problem of contents modulation because the resources are loaded and rendered in the internal storage space. However, when providing resources through the network, security problems such as content tampering and malicious code insertion should be considered. Therefore, in this paper, we propose a network rendering technique applying security techniques to provide augmented reality contents in a holographic HMD device.

• Korean Journal of Poultry Science
• /
• v.33 no.2
• /
• pp.105-111
• /
• 2006

This experiment was conducted to evaluate the effects of feldspar on growth performance and body composition in broiler chicks. A total of 120 one-day old 'Ross' broilers were assigned to 5 treatments in a completely randomized design. The five dietary treatments were control, antibiotic(0.05% chlortetracycline), feldspar 0.5, 1.0, 1.5% diets. The weight gain of broilers fed a diet containing 1.5% feldspar (2,088 g) was significantly (P<0.05) higher than control (1,888 g). The feed intake was significantly increased in feldspar treatments compared to that of the control (P<0.05). However, feed conversion ratio was significantly increased in 1.0% feldspar treatment compared to that of the control (P<0.05). The moisture and protein contents of meat were significantly increased in 1.0% feldspar treatment (75.69 and 15.22%) compared to that of the control (73.38 and 9.80%). However, the crude fat content of meat was reduced in feldspar treatments compared to control and antibiotics treatments (P<0.05). The TBA value of meat in feldspar treatments was significantly reduced compared to that of the control (P<0.05). The plasma cholesterol content was 129 mg/dL in 0.5% feldspar and 134 mg/dL in 1.0% feldspar treatments, which were significantly higher (P<0.05) than that of the control (103 mg/dL).