• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.875-884
• /
• 2023

Hydrogen infiltration into metals has been reported to induce alterations in their mechanical properties under load. In this study, we conducted CTOD (Crack Tip Opening Displacement) tests on steel specimens designed for use in liquid hydrogen storage systems. Electrochemical hydrogen charging was performed using both FCC series austenitic stainless steel and BCC series structural steel specimens, while CTOD testing was carried out using a 500kN-class material testing machine. Results indicate a notable divergence in behavior: SS400 test samples exhibited a higher susceptibility to failure compared to austenitic stainless steel counterparts, whereas SUS 316L test samples displayed minimal changes in displacement and maximum load due to hydrogen charging. However, SEM (Scanning Electron Microscopy) analysis results presented challenges in clearly explaining the mechanical degradation phenomenon in the tested materials. This study's resultant database holds significant promise for enhancing the safety design of liquid hydrogen storage systems, providing invaluable insights into the performance of various steel alloys under the influence of hydrogen embrittlement.

• Applied Microscopy
• /
• v.11 no.1
• /
• pp.59-65
• /
• 1981

The pars distalis of the Korean frogs (Rana dybowskii Guenther) during hibernating and active periods was observed with the electron microscope. Seven cell types were classified according to the size and shape of secretory granules and to the ultrastructural characteristics. There were many differences between hibernating and active frogs in type 5 cells. Therefore the following results were observed. Cell type 1; This type cell contains spherical secretory granules, $375{\sim}687m{\mu}$ in diameter. Cell type 2; This type cell contains various secretory granules, $250{\sim}437m{\mu}$ in diameter Cell type 3; Spherical and rod-shaped granules, $l25{\sim}187m{\mu}$ in diameter were observed. Cell type 4; In this type cell, the electron density is the lowest and the density of granules is the highest of all type cells. This type cell contains various secretory granules and large secretory granules, $2l0{\sim}420m{\mu}$ in diameter, were also observed. Cell type 5; The electron density of this cells is similar to that of type 4 cells. The density of granules is lower than that of type 4 cells. And the shapes of the secretory granules are similar to those of type 4 cells. But many rod shaped granules, $200{\sim}863m{\mu}$ in diameter, were also observed. Cell type 6; This type was similar to type 2. The electron density of cytoplasm is very low. Spherical granules, $232{\sim}316m{\mu}$ in diameter, were observed. Cell type 7; This type of cell has no secretory granules. This cell is not developed very well. The type 5 cells in hibernating frogs are different from cells in active frogs. In type 5 cells, many secretory granules were observed during active period. But the number of secretory granules were greatly declined and there were many vacuoles in cytoplasm during hibernating period.

• Journal of Yeungnam Medical Science
• /
• v.7 no.1
• /
• pp.81-93
• /
• 1990

The author fractographically analyized the cause of metal failure(the first time this procedure has been used for this metal failure)and also analyized it clinically. In this study, I selected eight cases which have been analyized fractographically. In all these cases, the analysis was done after treatment of metal failure of implants internally fixed to femur shaft fractures at the Department of Orthopedic Surgery, Yeung-Nam University Hospital during the six year period from May 1983 to September 1989. 1. Metal failure occured in five dynamic-compression plates, one Jewett nail, one screw in Rowe plate, and one interlocking nail. 2. The clinical cause of metal failure was deficiency of medial butress in five cases, incorrect position of implant in one case, and incorrect selection of implant in two cases. 3. The time interval between internal fixation and metal failure was four months in one case, between five months to twelve months in six cases, three years in one case. 4. The fractographically analytical cause of metal failure was ; first, impact failure, one case, second, fatigue failure, six cases, machining mark(stress liser), four cases type : low consistent cyclic fatigue failure irregular cyclic fatigue failure third, stress corrosion crack, one case. 5. 316L Stainless Steel has good resistance to corrosion. However, when its peculiar surface film is destroyed by fretting, it shows pitting corrosion. This is, perhaps, the main cause of metal failure. 6. It is possible that mechanical injury occured in implants during the manufacturing of implants or that making a screw hole is the main cause of metal failure.

• The Korean Journal of Pesticide Science
• /
• v.11 no.4
• /
• pp.261-267
• /
• 2007

The acute toxicity of several pesticides on 4 Korean water flea was investigated to develop a new standard species used for ecological risk assessment of pesticide. Four Korean freshwater cladocerans, Daphnia obtusa, Daphnia sp., Moina macrocopa and Simocepholus vetulus were exposed to five different pesticides during 48 hours to compare their sensitivity with a standard test species, Daphnia magna, endorsed formally by the major international organizations. The synthetic pyrethroid, fenpropathrin was the most toxic pesticide to cladocerans. Diazinon, carbofuran, iprodione and myclobutanil were in the order of their toxicity to cladocerans tested. There was no consistent difference in sensitivity to five pesticides for four Korean cladocerans tested. In conclusion, the ecological risk assessment using single species toxicity referred to base set data should not be enough to protect to every species in the field environment.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.4
• /
• pp.78-85
• /
• 2007

This study provides an attempt to evaluate sanding wastes, generated from a chemical company as a reused adsorbent. Organic impurities in the raw sanding wastes were removed by calcination at $550^{\circ}C$. Aluminum was a major inorganic composition in the raw sanding wastes and increased from 29.09% to 52.73% after calcination. Dissolved concentrations of heavy metals from the calcined sample were below 0.3 mg/L in a stability test at pH 2. From the pH-edge adsorption experiments with the calcined sanding wastes, As (V) was found to follow an anionic-type adsorption. Adsorption isotherm obtained with variation of the dosage of the calcined sanding wastes was better described by Freundlich equation than Langmuir one. Freundlich constants of K and 1/n were 4.244 and 0.316, respectively. The As (V) adsorption capacity of calcined sanding wastes estimated from Langmuir isotherm was 13.25 mg/g. From this study, the calcined sample was identified as a good reusable adsorbent in the view point of stability and adsorption capacity on As (V).

• Journal of Life Science
• /
• v.10 no.3
• /
• pp.307-316
• /
• 2000

Bacillus circulans S-1 extracellular pullulan 6-glucanohydrolase (EP) (EC 3.2.1.41) has been characterized with a purified enzyme of 140 kDa. The N-terminal amino acid sequence of the purified enzyme was P-L-N-M-S-Q-P. The enzyme displayed a temperature optimum of around $60^{\circ}C$ and a pH optimum of around pH 9.0. The enzyme was stable to incubation from pH 4.0 to pH 11.0 at $4^{\circ}C$ for 48h. The presence of substrate allowed the protection of the enzyme from heat inactivation. The activity of the enzyme was stimulated by several metal ions such as Mn2+ and Ca2+. The enzyme had an apparent Km of 7.92 mg/ml for pullulan. The purfied enzyme completely hydrolysed pullulan to maltotriose.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.309-316
• /
• 2020

Waterway design should prioritize appropriate channel width to ensure preferential safe passage for the arrival and departure of vessels. To calculate the minimum channel width required for safe passage a comprehensive review of several factors is required. These factors include vessel maneuverability, determined by vessel size, type and speed; environmental factors such as wind, tide, and wave action; human factors, including personal experience and operator judgment as well as marine traffic and navigation support facilities for decision making. However, the Korean channel width design standard is based only on vessel length, and requires improvement when compared with the standards of PIANC, USA, and Japan. This study aims to estimate the appropriate channel width required for one-way traffic in a straight channel, considering various vessel and environmental factors, using Fast Time Simulation (FTS). When the wind speed is 25 knots, with a current speed of 2 knots and a normal vessel speed of 10 knots FTS shows that a 150K GT Cruise Ship requires a minimum channel width of 0.67-0.91 the vessel length (L), whereas a 120K TEU Container Ship and a 300K DWT VLCC require 0.79-1.17 and 1.02-1.59, respectively. Such results can be used to calculate the minimum channel width required for safe passage as an improved Korean design standard.

• Health Policy and Management
• /
• v.14 no.3
• /
• pp.66-96
• /
• 2004

This study was intended to describe the hypertensive patient's lifestyle and quality of life by creating a hypothetic model on the lifestyle and quality of life and by examining a causeand effect relationship, and to contribute to countermeasures for practicing their lifestyle and improving the quality of life through creating a predictable model. Exogenous variable($\xi$) of hypothetic model in this study composed of a family support, hypertension knowledge, perceived benefit and toughness. Endogenous variable($\eta$) composed of self-esteem, perceived health state, depression, lifestyle and quality of life. There were 6 measured variables for exogenous variable(x). There were 9 measured variables(y) for endogenous variable. Also, there was error variable ($\delta,\;\epsilon$) of an individual. The survey was conducted for 207 hypertensive parents who received an out-patient service for 3 weeks from September 15, 2003 to October 3, 2003 after diagnosing as hypertension from 2 general hospitals in Daegu. As the conformance of hypothetic model in this study, there were $x^2$= 155.81, standard $x^2$ ($x^2$/df)=2.32, GFI=0.003, NFI=0.971, CFI=0.982, and RMSEA=0.080. Generally, the hypothetic model and actual data were well coincided. The higher the hypertension knowledge was(t=6.030), the higher the perceived benefit was(t=9.429), the higher the toughness was(t=2.783), and the higher the perceived health state was(t=2.282), the higher the lifestyle was. However, the degree of depression (t=-0.038), family support(t=1.161), and self-esteem(t=0.518) was not affected. The higher the family support was(t=10.476), the higher the self-esteem was(t=7.244), the higher the perceived health state was(t=6.996), the lower the degree of depression was(t=-2.044), and the higher the practice degree of lifestyle was(t=3.315), the higher the quality of life was. However, the toughness(t=1.672) didn't have a significant influence on the quality of life. It was modified to increase the model conformance and gain a conscious model As the result of model revision, for the model conformance, there were $x^2$= 118.43, standard $x^2$=1.69, GFI=0.923, NFI=0.976, CFI=0.982, and RMSEA=0.078. As the revised model showed the better conformance than hypothetic model, it seemed to be more suitable model. In the revised model, the perceived benefit(t=9.440) affected the lifestyle in the revised model. Then, the lifestyle was influenced by hypertension knowledge(t=6.139), toughness (t=2.757), family support(t=2.078), perceived health state(t=1.962) in the order. As a factor which affected the quality of life, there were the family support(t=l0.46l), self-esteem(t=7.368), perceived health state(t=6.989), lifestyle(t=3.316), toughness(t=2.584), and depression(t=-1.968) in the order. It showed the significant effect.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.2
• /
• pp.308-316
• /
• 2012

Proper skin care promotes good metabolism and the biological activity of skin, helps maintain the skin in a healthy and beautiful state when combined with nutritional nourishment. Health functional foods are being used for the purpose of enhancing efficient skin care. Health functional foods related to skin care maintain the epidermis, dermal fibroblast layer and subcutaneous tissue that form the skin. Efficient functional foods alleviate the signs of endogenous aging that come with getting older and exogenous aging caused by sunlight. Even though the field of skin care related to health functional foods has received less attention and been the subject of less research compared to functional cosmetics which are developing widely, this area of skin care that maintains and improves the layer of dermal fibroblast through the intake of food, is expected to progress with the commercialization of products in many fields when the related technical research development is galvanized and the related patents are applied for. Research into health functional foods related to skin care in Korea started rather late in comparison to other advanced countries where patents for relevant techniques have been applied for since 1990's together with research conducted on how they might be used for practical purposes. This study used the key words 'skin care, health functional food' to search for Korean patents that have been applied for at the Korean Intellectual Property Office from 1983 to 2011 using the KIPRIS database, in order to help researchers in the related fields by organizing the patented formulas for health functional foods for skin care which have gained attention recently. According to the number of registrations in each industry field, the total number of patents was 1,120 we screened the major patents among them, the field with the largest number was food foodstuff non-alcoholic beverage and preparation or treatment(A23L) with 135, then natural plant medicine & medical supplies and cosmetics(A61K) with 112, microorganisms or enzymes(C12N) with 63, heterocyclic compounds(C07D) with 44, horticulture or cultivation of sea weeds, forestry(A01G) 16 times, listed from the highest to the lowest number of applications. It has been revealed that food, foodstuff, non-alcoholic beverage and preparation or treatment(A23L) was the industry field where the most patents for health functional foods related to skin care were registered.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.309-316
• /
• 2018

The purpose of this study was to investigate the effects of Violae Herba Water Extract (VH) on the proinflammatory factors of lipopolysaccharide (LPS)-induced on the production of inflammatory mediators in RAW 264.7 mouse macrophages cells. We examined effect of Violae Herba Water Extract on the cell viability of RAW 264.7 mouse macrophages cells. Futhermore, After 24 hours treatment we investigated anti-inflammatory effect of Violae Herba Water Extract by the production of Bio-Plex cytokine assay, concentrations of various cytokines such NO, $interleukin(IL)-1{\beta}$, tumor necrosis factor ${\alpha}(TNF-{\alpha})$ and IL-6. The water extract of Violae Herba significantly inhibited the production of NO, $IL-1{\beta}$, $TNF-{\alpha}$ and IL-6 at the concentration of 25, 50, 100 and $200{\mu}g/mL$ in the LPS-induced RAW 264.7 mouse macrophages cells with no changes in the cell viability of them. These results suggest that water extract of Violae Herba has anti-inflammatory effect related with its inhibition of proinflammatory cytokines such as $IL-1{\beta}$, $TNF-{\alpha}$ and IL-6 in the LPS-induced RAW 264.7 mouse macrophages cells. Further research is needed to develop therapeutic agents for inflammatory diseases using Violae Herba.