• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.233-242
• /
• 1997

The main purpose of this paper is to investigate the dynamic optimal design of continuous beams. The computer-aided optimization technique is used to obtain the near-optimal parameters of continuous beam. The computer program is developed to obtain the natural frequency parameters and the forced vibration responses to a transit point load for the continuous beam with variable support spacing, mass and stiffness. The model test data is in good agreement with the computer calculation, which serves to validate the mathematical analysis. The optimization function to describe the design efficiency is defined as a linear combination of four dimensionless span characteristics; the maximum dynamic stress; the stress difference between span segments; the rms deflection under the transit point load; and the total span mass. Studies of three span beams show that the beam with near-optimal parameters can improve design efficiency when compared to a uniform beam with even spacing of the same total span length.

• Water for future
• /
• v.27 no.3
• /
• pp.45-54
• /
• 1994

Basic theory of fractal dimension is introduced and performed for the generated time series using the water balance model. The water balance equation over a large area is analyzed at seasonal time scales. In the generation and modification of mesoscale circulation local recycling of precipitation and dynamic effects of soil moisture are explicitly included. Time delay is incorporated in the analysis. Depending on the parameter values, the system showed different senarios in the evolution such as fixed point, limit cycle, and chaotic types of behavior. The stochastic behavior of the generated time series is due to deterministic chaos which arises from a nonlinear dynamic system with a limited number of equations whose trajectories are highly sensitive to initial conditions. The presence of noise arose from the characterization of the incoming precipitation, destroys the organized structure of the attractor. The existence of the attractor although noise is present is very important to the short-term prediction of the evolution. The implications of this nonlinear dynamics are important for the interpretation and modeling of hydrologic records and phenomena.

• Journal of Environmental Science International
• /
• v.1 no.1
• /
• pp.47-51
• /
• 1992

Volatile organic rompounds(VOCs) present in the VOCs-contaminated water are released to air while showering and their air concentrations depend on the shower parameters, resulting in the variation of the VOCs breath concentration. The present study evaluated the key shower parameters(water temperature and inhalation duration) that affect the inhalation exposure to air chloroform while showering, by determining chloroform breath concentration. The chloroform breath concentrations increased with water temperature and inhalation duration increase. The two inhalation exposure conditions which resulted in the greatest chloroform breath contentration difference were a 5 min-inhalation exposure with warm water and a 15 min-inhalation exposure with hot water. The chloroform breath concentration was almost three times higher after later exposure. The mathematical model analyzing the relationship between two key shower parameters and breath concentration normalized to water concentration fits quite Ivell with the experimental data at a probability of p : 0.0001.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.249-253
• /
• 2006

We propose a new beamforming algorithm, which is based on simplex downhill optimization method in the presence of pilot channels in cdma2000 reverse-link, for the rake structure antenna array in DS/CDMA communication system. Our approach uses the desired signal(pilot) covariance matrix and the interference covariance matrix. The beamforming weights are made according to maximum SINR criteria using simplex downhill optimization procedure. Our proposed scheme provides lower computational load, better convergence speed, better performance than existingadaptive beamforming algorithm. The simplex downhill method is well suited to finding the optimal or sub-optimal weight vector, since they require only the value of the deterministic function to be optimized. The rake beamformer performances are also evaluated under several set of practical parameter values with regard to spatial channel model. We also compare the performance between conventional rake receiver and the proposed one under same receiving power.

• Journal of Biomedical Engineering Research
• /
• v.29 no.3
• /
• pp.198-204
• /
• 2008

Uroflowmetry is a non-invasive clinical test useful for screening benign prostatic hyperplasia(BPH) common in the aged men. The current standard way to obtain the urinary flow rate is to continuously acquire the urine weight signal proportional to volume over time. The present study proposed an alternative technique measuring pressure to overcome noise problems present in the standard weight measuring technique. Experiments were performed to simultaneously acquire both weight and pressure changes during urination of 9 normal men. Noise components were separated from volume signals converted from both weight and pressure signals based on the polynomial signal model. Signal-to-noise ratio was defined as the ratio of the energies between signal and noise components of the measured volume changes, which was 8.5 times larger in the pressure measuring technique, implying that cleaner signal could be obtained, more immune to noisy environments. When four important diagnostic parameters were estimated, excellent correlation coefficients higher than 0.99 were resulted with mean relative errors less than 5%. Therefore, the present pressure measurement seemed valid as an alternative technique for uroflowmetry.

• Journal of Welding and Joining
• /
• v.24 no.3
• /
• pp.27-33
• /
• 2006

Structural stress approach is well known as a mesh-size insensitive fatigue assessment method by using finite element analyses. It is, however, difficult to estimate the structural stress (SS) at weld end points due to stress singularities when shell elements are used. In this study, fatigue evaluations with longitudinal load carrying box fillet weldment under out-of-plane bending load have been performed by using virtual node method (VNM) in order to avoid the problem, which is called the weld end effect. Various combinations of virtual node parameters, such as reference point and virtual node locations, are investigated for the estimation of proper structural stress values applying VNM in a systematic manner. The appropriate guidance of virtual node parameter has been offered for the fillet weldment considered in the study. The structural stress values obtained by VNM have also been validated by comparing the result with finite element model including weld bead. Moreover, the fatigue strength of the fillet weldment based on the equivalent structural stress is shown to be consistent with the master S-N curve.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.23-23
• /
• 2019

본 연구의 목적은 아시아-태평양 지역을 대상으로 위성영상 기반 고해상도의 신뢰성이 있고 쉽게 접근할 수 있는 강수 자료를 제공하는 데 있다. 본 연구에서 개발한 기후 관리 시스템은 총 3가지의 위성자료(원시위성자료, 편의보정한 위성자료, 공간상세화한 위성자료)를 제공한다. 위성자료의 공간해상도는 $0.1^{\circ}$, $0.05^{\circ}$이며, 시간해상도는 1 day이다. 비교적 신뢰성이 높은 기후 자료가 구축된 한반도를 대상으로 위성영상 편의보정, 공간상세화 기법을 검증하고, 개발한 기법을 아시아-태평양에 위치한 바누아투에 적용하여 기후 자료를 생산하였다. 원시위성자료는 TRMM (Tropical Rainfall Measurement Mission) 위성과 GPM (Global Precipitation Mission) 위성을 사용하여 구축하였다. 편의보정은 GRA-IDW (Geographical Ratio Analysis-Inverse Distance Weighted), GRA-Kriging, QM (Quantile Mapping) 기법을 검토하여 본 연구에 적합한 알고리즘을 개발하고 이 중 최적의 결과를 보여주는 GRA-IDW 기법을 최종적으로 선정하였다. 공간상세화는 PRISM (Parameter-elevation Regressions on Independent Slopes Model)을 선정하여 수행하였다. 원시위성자료를 검증한 결과를 살펴보면 상관계수는 1998년부터 2017년까지 0.775로 비교적 정확도가 높게 나왔다. bias 값은 원시위성자료 값이 지상관측자료보다 과대추정하는 것으로 나타났다. 최종적인 편의보정 기법으로 GRA-IDW 기법을 선정하여 편의보정한 위성자료를 생산하였다. 공간상세화한 위성자료를 검증한 결과를 앞서 분석한 원시위성자료, 편의보정한 위성자료와 비교하면, 공간상세화를 수행하기 전보다 상관계수는 다소 작아지고, RMSE는 커지는 것으로 나타나나 그 차이가 크지 않아 공간상세화한 위성자료를 응용분야에 직접 사용할 수 있을 것으로 분석된다. 본 연구를 통해 개발된 기법을 활용하면 아시아-태평양에 신뢰성 있는 기후 관측 자료를 제공할 수 있다. 향후 본 연구에서 선정한 대상지역 이외에 기상관측소의 수가 희박하고 불균등하게 분포하고 있는 아시아-태평양 지역에 본 과업에서 개발한 시스템을 적용하여 신뢰성 있는 기후 자료를 제공할 수 있을 것으로 사료된다.

• Journal of The Korean Astronomical Society
• /
• v.52 no.4
• /
• pp.133-144
• /
• 2019

We develop forecast models of daily probabilities of major flares (M- and X-class) based on empirical relationships between photospheric magnetic parameters and daily flaring rates from May 2010 to April 2018. In this study, we consider ten magnetic parameters characterizing size, distribution, and non-potentiality of vector magnetic fields from Solar Dynamics Observatory (SDO)/Helioseismic and Magnetic Imager (HMI) and Geostationary Operational Environmental Satellites (GOES) X-ray flare data. The magnetic parameters are classified into three types: the total unsigned parameters, the total signed parameters, and the mean parameters. We divide the data into two sets chronologically: 70% for training and 30% for testing. The empirical relationships between the parameters and flaring rates are used to predict flare occurrence probabilities for a given magnetic parameter value. Major results of this study are as follows. First, major flare occurrence rates are well correlated with ten parameters having correlation coefficients above 0.85. Second, logarithmic values of flaring rates are well approximated by linear equations. Third, using total unsigned and signed parameters achieved better performance for predicting flares than the mean parameters in terms of verification measures of probabilistic and converted binary forecasts. We conclude that the total quantity of non-potentiality of magnetic fields is crucial for flare forecasting among the magnetic parameters considered in this study. When this model is applied for operational use, it can be used using the data of 21:00 TAI with a slight underestimation of 2-6.3%.

• Advances in nano research
• /
• v.10 no.1
• /
• pp.59-69
• /
• 2021

Electrospinning is a cost-effective and versatile method for producing submicron fibers. Although this method is relatively simple, at the theoretical level the interactions between process parameters and their influence on the fiber morphology are not yet fully understood. In this paper, the aim was finding optimal electrospinning parameters in order to obtain the smallest fiber diameter by using Taguchi's methodology. The nanofibers produced by electrospinning a solution of Thermoplastic Polyurethane (TPU) in Dimethylformamide (DMF). Polymer concentration and process parameters were considered as the effective factors. Taguchi's L9 orthogonal design (4 parameters, 3 levels) was applied to the experiential design. Optimal electrospinning conditions were determined using the signal-to-noise (S/N) ratio with Minitab 17 software. The morphology of the nanofibers was studied by a Scanning Electron Microscope (SEM). Thereafter, a tensile tester machine was used to assess mechanical properties of nanofibrous scaffolds. The analysis of DoE experiments showed that TPU concentration was the most significant parameter. An optimum combination to reach smallest diameters was yielded at 12 wt% polymer concentration, 16 kV of the supply voltage, 0.1 ml/h feed rate and 15 cm tip-to-distance. An empirical model was extracted and verified using confirmation test. The average diameter of nanofibers at the optimum conditions was in the range of 242.10 to 257.92 nm at a confidence level 95% which was in close agreement with the predicted value by the Taguchi technique. Also, the mechanical properties increased with decreasing fibers diameter. This study demonstrated Taguchi method was successfully applied to the optimization of electrospinning conditions for TPU nanofibers and the presented scaffold can mimic the structure of Extracellular Matrix (ECM).

• CELLMED
• /
• v.11 no.3
• /
• pp.14.1-14.9
• /
• 2021

Background: Cuscuta reflexa Roxb is a member of the Cuscutaceae family, and in Unani medicine, it is known as Aftimoon. It is a parasitic plant that can be found growing abundantly on various host plants in India up to 3000 metres in altitude during the rainy season. Unani physicians have been using it for years to cure a variety of illnesses, including psychiatric illnesses like melancholia, schizophrenia, and epilepsy. It has been used to cure hepatitis, palpitations, and skin disorders, among other things. Objective of the study: To evaluate anti-anxiety effect of Cuscuta reflexa Roxb in Swiss Albino mice of either sex. Materials and Methods: A total of 24 Swiss Albino mice weighing 25-35 g were used in this study. Animals were chosen at random and held in their cages for at least 7 days in a standard setting. Group A was given regular saline as a vehicle, Group B was given a hydro alcoholic extract of the lower dose of the test drug, Group C was given a hydro alcoholic extract of the higher dose of the test drug, and Group D was given the standard drug Diazepam 5 mg/kg orally. Aftimoon as hydro alcoholic extract (200 mg/kg and 400 mg/kg body wt.) was given in single and double doses and observed for 7 days. Results: For each parameter in each category, mean and standard deviations were computed. For multiple group comparisons, a one-way ANOVA was used, followed by Turkey's post hoc test. (p<0.05) was used as the significance standard. Conclusion: These results advocate that the Aftimoon as double dose (400 mg/kg body wt.) revealed anti-anxiety effect similar to standard drug.