• The Journal of the Korea Contents Association
• /
• v.21 no.5
• /
• pp.905-917
• /
• 2021

Qipao is a national costume of China and a representative Chinese symbol with unique cultural meanings. This study first outlines the concept and development history of Qipao, sorts out existing literature, and summarizes the five elements of Qipao through previous study. Then, based on the theory of cultural levels and design characteristics, focusing on the design characteristics of the three levels of the outer level, middle level and inner level of culture, it analyzes the specific meaning of the five elements of Qipao. Through research, it was found that there are various developmental relationships between the three levels of culture for each element of Qipao. Through the study, it is found that Qipao, as a typical Chinese dress, not only has the research significance of design, but also has rich cultural connotations and diversified information on social, economic, technological, and fashion development. This study can enable us to fully understand the historical and social value and modern significance of the Chinese Qipao, and can provide basic data for fashion design researchers. This study is a basic research for the modernization of traditional Chinese clothing.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.299-301
• /
• 1995

This paper represents an overvoltage clamping circuit for three level inverters. With a proposed overvoltage clamping circuit, the problems that high voltage stresses and voltage unbalance between outer and inner switches occurs in high power and high voltage 3-level inverters are reduced.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.3
• /
• pp.37-41
• /
• 2012

The wafer level stacking with Cu-to-Cu bonding becomes an important technology for high density DRAM stacking, high performance logic stacking, or heterogeneous chip stacking. Cu CMP becomes one of key processes to be developed for optimized Cu bonding process. For the ultra low-k dielectrics used in the advanced logic applications, Ti barrier has been preferred due to its good compatibility with porous ultra low-K dielectrics. But since Ti is electrochemically reactive to Cu CMP slurries, it leads to a new challenge to Cu CMP. In this study Ti barrier/Cu interconnection structure has been investigated for the wafer level 3D integration. Cu CMP wafers have been fabricated by a damascene process and two types of slurry were compared. The slurry selectivity to $SiO_2$ and Ti and removal rate were measured. The effect of metal line width and metal density were evaluated.

• Proceedings of the CALSEC Conference
• /
• 2003.09a
• /
• pp.54-59
• /
• 2003

The information sharing is essential to make collaboration by participants in the collaboration environment. The sharing of the information is necessary to reduce time-to-market of new Product. In this paper, V2-model is proposed far supporting the sharing of the information on product development. V2-model supports collaborative product development in design and supply chain. Through viewpoints, V2-model supports 1) two-level structure that consist of private level and public level ,2) level-up process and 3) product development process. The public level information supports to share the product information on collaborative supply chain and design. The viewpoints in V2-model are divided into public viewpoints that point to the public level information and private viewpoints that point to the private level information. Private viewpoints are transformed into public viewpoints. The extended Topic Map has B-Topic, S-Topic and View for representing V2-model in this paper. The level-up process of V2-model is implemented through the merging of S-Topics. V2-model is implemented with washing machine model using extended Topic Maps. In this model, the public viewpoints and private viewpoints are represented and the level-up process, which transforms private viewpoints into public viewpoints, is implemented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.3
• /
• pp.363-369
• /
• 1999

In this paper, we design the robust $H_{\infty}$ controller for water level control of steam generator using a mixed $H_{\infty}$ optimization with model-matching method. Firstly we choose the desired model which has good disturbance rejection performance. Secondly we design a stabilizing controller to keep the model-matching error small and also provide sufficiently large stability margin against additive perturbations of the nominal plant. Simulation results show that proposed robust $H_{\infty}$ controller at specific power operation has satisfactory performances against the variations of load power, steam flow rate, primary circuit coolant temperature, and feedwater temperature. It can be also observed that the proposed robust $H_{\infty}$ controller exhibits better robust stability than conventional PI controller.

• Journal of the Korea Society for Simulation
• /
• v.10 no.3
• /
• pp.59-70
• /
• 2001

Typical low-level image processing tasks require thousands of operations per pixel for each input image. Traditional general-purpose computers are not capable of performing such tasks in real time. Yet important features of traditional computers are not exploited by low-level image processing tasks. Since storage requirements are limited to a small number of low-precision integer values per pixel, large hierarchical memory systems are not necessary. The mismatch between the demands of low-level image processing tasks and the characteristics of conventional computers motivates investigation of alternative architectures. The structure of the tasks suggests employing an array of processing elements, one per pixel, sharing instructions issued by a single controller. In this paper we implemented various image processing filtering using the format converter. Also, we realized from conventional gray image process to color image process. This design method is based on realized the large processor-per-pixel array by integrated circuit technology This format converter design has control path implementation efficiently, and can be utilize the high technology without complicated controller hardware.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.11a
• /
• pp.143-148
• /
• 1999

A distributed real-time system that is being wed now is usually divided into three level : higher level, middle level, and lower level. The higher level network is usually called an information network, the middle level is called a control network, and the lower level is called a field network or a divice network. This dissertation suggests and implements a middle level network which is called PICNET-NP (Plant Implementation and Control Network for Nuclear Power Plant). PICNET-NP is based partly on IEEE 802.4 token-passing bus access method and partly on IEEE 802.3 physical layer. For this purpose a new interface, a physical layer service translator, is introduced. A control network using this method is implemented and applied to a distributed real-time system.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.3
• /
• pp.212-221
• /
• 2010

Proposed in the paper is a methodology to generate kinematic template for 3D JIG models. Recently, according to increase of the rate of automatic facility in manufacturing system, the 3D manufacturing and verification research and development have been issued. So, unlike in the past, moving 3D facilities are very various like JIGs, turn table, AS/RS worked in the automated manufacturing industry. Because 3D mesh models are used in these kinds of 3D simulation, users have to define the kinematic information manually. This 3D mesh data doesn't have parametric information and design history of the 3D model unlike the design level data. So, it is lighter than 3D design level data and more efficient to render on the 3D virtual manufacturing environment. But, when user wants to find a common axis located between the links, the parameter information of the model has to reconstruct for defining kinematic construction. It takes a long time and very repetitive to define an axis and makes a joint using 3D mesh data and it is non-intuitive task for user. This paper proposed template model that provides kinematic information of the JIG. This model is kinds of a state diagram to describe a relation between links. So, this model can be used for a kinematic template to the JIG which has a same mechanism. The template model has to be registered in the template library to use in the future, after user made the model of the specific type of the 3D JIG model.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.3
• /
• pp.230-238
• /
• 2003

The configuration design of a mechanical product can be efficiently performed when it is based on the functional modeling. There are methodologies, which decompose function from the abstract level to the concrete level and match the functions to physical parts. But it is difficult to carry out an innovative design when the function is matched only to a pre-detined part. This paper describes the configuration design process of a mechanical product with a design expert system, which uses function taxonomy and TRIZ theory. The expert system can propose a functional modeling of a new part. which is not in the existing parts list. The abstraction levels of design knowledge are introduced, which describe the operation of mechanical product in the levels of abstraction. This is the theoretical background of using knowledge of function and TRIZ for configuration design. The expert system is adequate to control this design knowledge. which expresses knowledge of functional modeling, mapping rules between functions and parts, selection of parts, and TRIZ theory. The hierarchy of functions and machine parts are properly expressed by classes and objects in the expert system. A design expert system has been implemented for the configuration design of a train bogie, and a new brake system of the bogie is introduced with the aid of TRIZ's 30 function groups.

• Korean Institute of Interior Design Journal
• /
• v.15 no.3 s.56
• /
• pp.48-55
• /
• 2006

A sustainable building must produce an interior environment that is safe, healthy, comfortable and supportive of human performance and well-being. The medical human comfort: performance and productivity cost of unhealthy environment may cause much cost for healing. Research that buildings with daylight, fresh air, eco-materials and sustainable interior design are consistently rated as more comfortable and occupants performance, satisfaction and health. This study is to categorize systematically interior environmental design elements for improving sustainability with a view to developing an evaluation model of super high-rise apartment unit plans. With a literature survey and design guide lines concerning sustainable design elements, three hierarchical categorization levels of human, environment, energy and resources systems that consists of upper, middle, low design elements have been proposed. A total of 6 items have been suggested for middle level of categorization and 24 items for lower level. Finally a total of 107 design elements concerning the 24 items and their relationahips have been revealed. The needs for a systematic approach to interior environmental design for sustainability have been discussed.