• Applied Microscopy
• /
• 제38권2호
• /
• pp.73-79
• /
• 2008

현재 생물학 분야에서 세포 구조를 3차로 구현하기 위해 전자 현미경을 이용하는 연구는 매우 빠르게 발전하고 있다. 최근에는 시료의 구조를 변형시키는 화학 고정법 대신 시료를 빠른 시간 내에 동결고정시킴으로써 구조 변형 없이 세포 3차 구조 구현이 가능해졌다. 이러한 기술의 도입으로 단편이미지로만 세포 구조를 이해해왔던 지금까지와 달리 Cryo-ET를 통해 인위적인 구조 변형 없는 3차 구조 구현이 가능해졌고, 이 기법은 약물전달, 나노 공학 등 여러 학문 분야에 활용됨으로써 학문 발전에 이바지 할 것이다.

• 동력기계공학회지
• /
• 제14권3호
• /
• pp.5-12
• /
• 2010

The purpose of this study is to analyze heterogeneous distribution of branch-like structure at downstream region of inner spray. The previous many studies about diesel spray structure have yet stayed in the analysis of 2-D structure, and there are very few of informations which are concerned with 3-D analysis of the structure. The heterogeneous distribution of droplets in inner spray affects the mixture formation of diesel spray, and also the combustion characteristics of the diesel engines. Therefore, in order to investigate 3-D structure of evaporative spray the laser beam of 2-D plane was used in this study. Liquid fuel was injected from a single-hole nozzle (l/d=5) into a constant-volume vessel under high pressure and temperature in order to visualize the spray phenomena. The incident laser beam was offset on the central axis. From the images analysis taken by offset of laser beam, we examine formation mechanism of heterogeneous distribution by vortex flow at the downstream of the diesel spray. As the experimental results, the branch-like structure formed heterogeneous distribution of the droplets consists of high concentration of vapor phase in the periphery of droplets and spray tip of branch-like structure. Also the 3-D spatial structure of the evaporative diesel spray can be verified by images obtained from 2-D measurement methods.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권5호
• /
• pp.537-542
• /
• 2014

The three-dimensional (3-D) NAND flash structure with fully charge storage using edge fringing field effect is presented, and its programming characteristic is evaluated. We successfully confirmed that this structure using fringing field effect provides good program characteristics showing sufficient threshold voltage ($V_T$) margin by technology computer-aided design (TCAD) simulation. From the simulation results, we expect that program speed characteristics of proposed structure have competitive compared to other 3D NAND flash structure. Moreover, it is estimated that this structural feature using edge fringing field effect gives better design scalability compared to the conventional 3D NAND flash structures by scaling of the hole size for the vertical channel. As a result, the proposed structure is one of the candidates of Terabit 3D vertical NAND flash cell with lower bit cost and design scalability.

• 한국CDE학회논문집
• /
• 제8권2호
• /
• pp.122-132
• /
• 2003

STEP AP218 has a standard schema to represent the structural model of a midship section. While it helps to exchange ship structural models among heterogeneous automation systems, most shipyards and classification societies still exchange information using 2D paper drawings. We propose a feature parameter input method to generate a 3D STEP model of a ship structure from 2D drawings. We have analyzed the ship structure information contained in 2D drawings and have defined a data model to express the contents of the drawing. We also developed a QUI for the feature parameter input. To translate 2D information extracted from the drawing into a STEP AP2l8 model, we have developed a shape generation library, and generated the 3D ship model through this library. The generated 3D STEP model of a ship structure can be used to exchange information between design departments in a shipyard as well as between classification societies and shipyards.

• 패션비즈니스
• /
• 제22권2호
• /
• pp.1-13
• /
• 2018

3D printing technology, which is expected to play a leading role within the Fourth Industrial Revolution, is becoming distinguished not only in the space, automotive, medical and engineering industries, but also in the area of design. The fashion and textile structures created by 3D printing technology were classified into three types - basic structure, unified structure, and a new physical structure. When traditional weaving, knitting, and stitching was reinterpreted through 3D printing, there were apparent limitations in reproducing the characteristics of fabric structures due to differences in the materials and structures of traditional textiles. New physical structures are being developed to break away from merely reproducing traditional textile structures, and to bring out the characteristics of 3D printing technology. As examples of new physical structures, there are the kinematics structure which utilizes the hinge method, mesostructure cellular material, and the N12 disk structure. Such techniques potentially open a new paradigm of fashion and textile structures. Some innovative aspects of 3D printing technology may result in changes in the methods of collaboration, manufacturing, and distribution. Designers are receiving help from specialists of various backgrounds to merge 3D printing technology to create original works. Also, 3D printing not only makes personalized custom designs available, but shortens the distribution channels, foretelling a change within the fashion and textile industry.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1152-1155
• /
• 2007

Lately concerns about structure have been increased by advantages of floor impact noise, poilitical induction and changeability. Hence, Flat Plate Structure has been constructed increasingly. This study shows the comparison of the performance of sound insulation of Flat Plate Structure System and the existing Wall Structure. For this study, taking the same level organization of Daelim Architectural Environmental Research Center, I found the performance of sound insulation between the upper and lower floors about Wall Structure and Flat Plate Structure. Consequently, the performance of sound insulation between upper and lower floors of Flat Plate Structure was 3-5dB higher was approximately 3-5dB higher than one of Wall Structure. Especially, the performance of sound insulation on the upper floor was 1-3dB higher than on the lower floor. In addition, as the result of comparing radiation sound which radiates from the wall of lower floors with each structure system, Flat Plate Structure was about 4dB higher with Rw than Wall Structure. As we see totally, the performance of sound insulation of Flat Plate Structure is highter than one of the Wall Structure. It is 3-5dB higher and the main reason for this result depends on the existence of the wall which can radiate sound and nonexistence.

• BMB Reports
• /
• 제56권12호
• /
• pp.633-644
• /
• 2023

Epigenetic mechanisms, primarily mediated through histone and DNA modifications, play a pivotal role in orchestrating the functional identity of a cell and its response to environmental cues. Similarly, the spatial arrangement of chromatin within the three-dimensional (3D) nucleus has been recognized as a significant factor influencing genomic function. Investigating the relationship between epigenetic regulation and 3D chromatin structure has revealed correlation and causality between these processes, from the global alignment of average chromatin structure with chromatin marks to the nuanced correlations at smaller scales. This review aims to dissect the biological significance and the interplay between the epigenome and 3D chromatin structure, while also exploring the underlying molecular mechanisms. By synthesizing insights from both experimental and modeling perspectives, we seek to provide a comprehensive understanding of cellular functions.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.702-708
• /
• 2018

3D 프린팅 기술은 기존 산업계의 생산 패러다임을 변화할 수 있는 4차 산업혁명의 주요기술로 큰 관심을 받고 있다. 건설분야의 특성으로 인해 3D 프린팅의 기술 도입이 타 산업분야에 비해 느리지만, 향후 생산인구의 감소와 생산성 및 안전도 향상 등을 위해 3D 프린팅을 활용한 건설 자동화가 필요하다. 본 연구에서는 3D 프린팅을 건설에 도입하기 위한 사전준비로서 건설 3D 프린팅 공종분류체계와 기존 표준품셈체계와의 연계방안을 제시 한다. 이를 위해 건설 및 3D 프린팅 관련 전문가 자문을 바탕으로 기존 건설 3D 프린팅 기술을 바탕으로 가상의 시나리오를 작성하였다. 시나리오에 따라 3D 프린팅 공사 수행에 필요한 16개의 공종을 도출하였다. 기존 공종분류체계와 표준품셈을 분석하고 도출된 3D 프린팅 공종을 연계하였다. 기존 분류체계와 동일한 3D 프린팅 공종도 있었으며 기존에 존재하지 않는 공종은 유사한 분류체계 하위에 추가하는 등 4가지 타입으로 구분하였다. 본 연구의 결과는 향후 3D 프린팅 공사관리 및 원가산정에 도움이 될 수 있을 것으로 기대된다. 향후 3D 프린팅 공사 수행을 통해 실질적인 품셈 산출이 필요하다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.248-254
• /
• 2001

This paper presents a progressive algorithm for reconstructing a 3D structure from a given 2D sketch drawing (edge-vertex graph without hidden line removal) according to the user's sketch order. While previous methods reconstruct a 3D structure at once, the proposed method progressively calculate a 3D structure by optimizing the coordinates of vertices of an object according to the sketch order. The progressive method reconstructs the most plausible 3D object quickly by applying 3D constraints that are derived from the relationship between the object and the sketch drawing in the optimization process. The progressive reconstruction algorithm is discussed, and examples from a working implementation are given.

• 한국전자현미경학회:학술대회논문집
• /
• 한국현미경학회 2003년도 제34차 추계학술대회
• /
• pp.24-25
• /
• 2003