• The korean journal of orthodontics
• /
• v.14 no.2
• /
• pp.187-202
• /
• 1984

There are evidences that exogenous electric currents are capable of enhancing bone formation and resolution, and that the conversion of the bioelectric response to biochemical activity provides the directional component of orthodontic tooth movement. In addition, evidence has implicated cyclic nucleotides in alveolar bone cellular activation mechanism during orthodontic tooth movement. In view of these evidences, this study was performed to investigate the effects of exogenous electric currents on cyclic nuclotide levels in feline alveolar bone and the possible clinical application of electric currents as an additional orthodontic tool. In the first study, three groups of three adult cats were subjected to application of a constant direct current of $10{\pm}2$ microamperes to gingival tissue near maxillary canine noninvasively for 1, 3, and 7 days respectively. In the second study, three groups of three adult cats each were treated by an electric-orthodontic procedure for 1, 3, and 7 days respectively. The left maxillary (control) canine received an orthodontic force of 80gm alone at time of initiation, while the right maxillary (experimental) canine received combined force-electric stimulation (80gm of force and $10{\pm}2$ microamperes of a constant D.C. currents). Alveola, bone samples were obtain from the mesial (tension and/or cathode) and the distal (compression and/or anode) sites surrounding maxillary canines as well as from contralateral control sites. The samples were extracted, boiled, homogenized, and the supernatants were assayed for cyclic nucleotides (cAMP, cGMP) by a radioimmunoassay method. And also the amount of tooth movement was measured in the second study. On the basis of this study, the following conclusions can be drawn: 1. The fluctuation pattern of cyclic nucleotide levels in alveolar bone treated by exogenous electric currents was similar to that treated by orthodontic force. 2. The cAMP levels in alveolar bone of electrically treated teeth significantly elevated above the control values. And of electrically treated teeth, the values of the anode sites were higher than those of the cathode sites. 9. The cGMP levels in alveolar bone of electrically treated teeth elevated above the control values at the initiation phase of treatment, but dropped below the control values at time of termination. And of electrically treated teeth, the values of the cathode sites were higher than those of the anode sites. 4. The rate of tooth movement in teeth . treated by force-electric combination increased with the length of treatment as compared to that treated by mechanical force alone.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.640-653
• /
• 2011

We simulate the propagation of earthquake waves in the continental margin of Antarctica using the elastic wave modeling algorithm, which is modified to be suitable for acoustic-elastic coupled media and earthquake source. To simulate the various types of earthquake source, the staggered-grid finite-difference method, which is composed of velocity-stress formulae, can be more appropriate to use than the conventional, displacement-based, finite-difference method. We simulate the elastic wave propagation generated by earthquakes combining 3D staggered-grid finite-difference algorithm composed of displacement-velocity-stress formulae with double couple mechanisms for earthquake source. Through numerical tests for left-lateral strike-slip fault, normal fault and reverse fault, we could confirm that the first arrival of P waves at the surface is in a good agreement with the theoretically-predicted results based on the focal mechanism of an earthquake. Numerical results for a model made after the subduction zone in the continental margin of Antarctica showed that earthquake waves, generated by the reverse fault and propagating through the continental crust, the oceanic crust and the ocean, are accurately described.

• Korean Journal of Weed Science
• /
• v.32 no.3
• /
• pp.159-169
• /
• 2012

Hormesis is a dose-response phenomenon that is characterized by low-dose stimulation and high-dose inhibition. This biphasic dose-responses have had a long and extensive history in the fields of chemical toxicology, radiation biology and pharmacology. Hormesis has been found from bacteria, fungi, plants and animals, but hormesis in plants has received relatively little attention. Thus principles, occurrence, factors affecting the expression of hormetic responses, and their mechanisms in plants induced by herbicides are reviewed to provide the potentials for crop enhancement. Bromacil, bromoxynil, chloramben, propachlor, terbacil, EPTC, MSMA, and glyphosate at low doses showed stimulatory response in growth. Subtoxic dose of glyphosate increased sucrose content in sugarcane that is used worldwide in sugarcane production. Low dose of protoporphyrinogen-inhibiting herbicides induced increased pathogen defence, and low dose of triazine herbicides improved nitrogen metabolism and increased protein content in some crops. Further researches on potential benefits and risks of hormesis and its mechanism are needed for application of crop enhancement in agriculture.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.4
• /
• pp.579-587
• /
• 2013

A total of 288 crossbred (Duroc${\times}$Landrace${\times}$Yorkshire) growing pigs were used in two experiments to investigate the effects of adding ${\beta}$-mannanase to corn-soybean meal-based diets on pig performance and apparent total tract digestibility (ATTD). Both experiments lasted 28 d and were split into two phases namely 1 to 14 days (phase 1) and 15 to 28 days (phase 2). In Exp. 1,144 pigs weighing $23.60{\pm}1.59$ kg BW were assigned to one of four corn-soybean meal-based diets containing 0, 200, 400 or 600 U/kg ${\beta}$-mannanase. Increasing the level of ${\beta}$-mannanase increased weight gain (quadratic effect; p<0.01) and feed efficiency (linear and quadratic effect; p<0.01) during the second phase and the overall experiment. However, performance was unaffected (p>0.05) by treatment during phase 1. Increasing the amount of ${\beta}$-mannanase in the diet improved (linear and quadratic effect; p<0.05) the ATTD of CP, NDF, ADF, calcium, and phosphorus during both phases. Based on the results of Exp. 1, the optimal supplementation level was determined to be 400 U/kg and this was the level that was applied in Exp. 2. In Exp. 2, 144 pigs weighing $23.50{\pm}1.86$ kg BW were fed diets containing 0 or 400 U/kg of ${\beta}$-mannanase and 3,250 or 3,400 kcal/kg digestible energy (DE) in a $2{\times}2$ factorial design. ${\beta}$-Mannanase supplementation increased (p<0.01) weight gain and feed efficiency while the higher energy content increased (p<0.01) feed intake and feed efficiency during both phases and overall. Increased energy content and ${\beta}$-mannanase supplementation both increased (p<0.05) the ATTD of DM, CP, NDF, ADF, phosphorus, and GE during both phases. There were no significant interactions between energy level and ${\beta}$-mannanase for any performance or digestibility parameter. In conclusion, the ${\beta}$-mannanase used in the present experiment improved the performance of growing pigs fed diets based on corn and soybean. The mechanism through which the improvements were obtained appears to be related to improvements in ATTD.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.51-57
• /
• 2008

we have demonstrated structural evolution and optical properties of Si-nanowires (NWs) synthesized on Si (111) substrates with nanoscale Au-Si islands by rapid thermal chemical vapor deposition (RTCVD). The Au-Si nano-islands (10-50nm in diameter) were employed as a liquid-droplet catalysis to grow Si-NWs via vapor-liquid-solid mechanism. The Si-NWs were grown by a mixture gas of SiH4 and H2 at a pressure of 1.0 Torr and temperatures of $500{\sim}600^{\circ}C$. Scanning electron microscopy measurements showed that the Si-NWs are uniformly sized and vertically well-aligned along <111> direction on Si (111) surfaces. The resulting NWs are ${\sim}60nm$ in average diameter and ${\sim}5um$ in average length. High resolution transmission microscopy measurements indicated that the NWs are single crystals covered with amorphous SiOx layers of ${\sim}3nm$ thickness. In addition, the optical properties of the NWs were investigated by micro-Raman spectroscopy. The downshift and asymmetric broadening of the Si main optical phonon peak were observed in Raman spectra of Si-NWs, which indicates a minute stress effects on Raman spectra due to a slight lattice distortion led by lattice expansion of Si-NW structures.

• Journal of Life Science
• /
• v.23 no.3
• /
• pp.448-461
• /
• 2013

Inflammatory bowel disease, known as Crohn's disease and ulcerative colitis, is an unexplained disease characterized by chronic inflammation that repeats a cycle of relapse, improvement, and complications. The cause of inflammatory bowel disease is not clearly known, but it is predicted that a complex of various factors precipitate its occurrence. In particular, inflammatory mediators, such as cytokine, induce an increase in cell-mediated inflammatory responses. Focal tissue damage then occurs in the intestinal mucosa because of the weakening of the immune-modulating functions of cotton. Immune and inflammatory responses do not decrease appropriately but continue until they lead to chronic inflammation. Current research has focused on the cytokine genes, which have important roles in these inflammatory responses. Cytokine is a glycoprotein that is produced mostly in activated immune cells. It connects the activation, multiplication, and differentiation between immune cells, which causes focal tissue damage and inflammatory response. Moreover, butyrate, which originates in dietary fiber and plays an important role in the structure and function of the intestinal area, shows control functions in the intestinal immune system by decreasing the proinflammatory cytokine and increasing the anti-inflammatory cytokine. Therefore, this research investigated the molecular mechanism of the anti-inflammatory effects of butyrate to comprehend the cytokine controlling abilities of butyrate in the immune cells. Butyrate is expected to have potential in new treatment strategies for inflammatory bowel disease.

• Journal of Biomedical Engineering Research
• /
• v.24 no.6 s.81
• /
• pp.533-541
• /
• 2003

In the paper. the health card system to integrate several cards into one card for protecting patient's privacy and security problems is proposed. Firstly, it is defined the minimal data set for integrating several patient cards into one card using IC card, and developed the issuing system to issue the integrated patient IC card. In order to secure and certificate a patient's personal information. the integrated patient IC card has applied 3-DES and the PKI certificate authority based Windows 2000 is established. The receipt and reservation system for taking care of a healthcare has developed to cooperate with the existing hospital computer system. The integrating patient IC card system proposed in this paper is implemented to 11 hospitals and used for 1.000 patients. On the result of the simulation. the proposed system can receive or reserve for a patient to take care of healthcare in the simulated hospitals and also establish the basis of the mechanism to share a medical information.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.1
• /
• pp.41-50
• /
• 2011

Three-dimensional(3D) numerical analyses have been conducted to study the behaviour of a single pile to adjacent tunnelling conducted in the lateral direction of the pile. In the numerical analyses, the interaction between the tunnel, the pile and the soil next to the pile has been analysed. The study includes the pile settlement, the relative shear displacement between the pile and the soil, the shear stresses at the soil next to the pile and the axial force on the pile. In particular, the shear stress transfer mechanism along the pile related to the tunnel advancement has been rigorously analysed. Due to changes in the relative shear displacement between the pile and the soil next to the pile during the tunnel advancement, the shear stress and the axial force distributions along the pile have been changed. Downward shear stress developed above the tunnel springline (Z/L=0.0-0.7~0.8), while upward shear stress is mobilised below the tunnel springline (Z/L=0.7~0.8-1.0) resulting in compressive force on the pile, where Z is the pile location and L is the pile length. Maximum compressive force of about $0.475P_a$ was developed on the pile after completion of tunnel advancement, where $P_a$ is the allowable pile capacity. Some insights into the pile behaviour to tunnelling obtained from the numerical analyses will be reported and discussed.

• Resources Recycling
• /
• v.30 no.3
• /
• pp.30-40
• /
• 2021

The present study investigates the bioleaching efficiencies of arsenic via contact and non-contact mechanisms. The attachment of Acidithiobacillus ferrooxidans was restricted by a partition system comprising a semi-permeable membrane with a molecular weight cutoff of 12-14 kDa. The results were compared for two arsenic concentrations in the system (1.0% and 0.5% w/v) to maintain a homogeneous system. The overall bacterial performance was monitored by comparing total arsenic and iron concentrations, Fe ion speciation, pH, and solution redox potentials in flask bioleaching experiments over a period of 10 d. Our results indicated that bacterial attachment could increase arsenic extraction efficiency from 20.0% to 44.9% at 1.0 % solid concentrations. These findings suggest that the bacterial contact mechanism greatly influences arsenic bioleaching from mine tailings. Therefore, systems involving two-step or non-contact bioleaching are less effective than those involving one-step or contact bioleaching for the efficient extraction of arsenic from mine tailings.

• Structural Engineering and Mechanics
• /
• v.81 no.2
• /
• pp.243-258
• /
• 2022

In this paper, tensile behavior of joint filling has been investigated under experimental test and numerical simulation (particle flow code). Two concrete slabs containing semi cylinder hole were prepared. These slabs were attached to each other by glue and one cubic specimen with dimension of 19 cm×15 cm×6 cm was prepared. This sample placed in the universal testing machine where the direct tensile stress can be applied to this specimen by implementing a special type of load transferring device which converts the applied compressive load to that of the tensile during the test. In the present work, two different joint filling thickness i.e., 3 mm and 6 mm were prepared and tested in the laboratory to measure their direct tensile strengths. Concurrent with experimental test, numerical simulation was performed to investigate the effect of hole diameter, length of edge notch, filling thickness and filling length on the tensile behavior of joint filling. Model dimension was 19 cm×15 cm. hole diameter was change in four different values of 2.5 cm, 5 cm, 7.5 cm and 10 cm. glue lengths were different based on the hole diameter, i.e., 12.5 cm for hole diameter of 2.5 cm, 10 cm for hole diameter of 5 cm, 7.5 cm for hole diameter of 7.5 cm and 5 cm for hole diameter of 10 cm. length of edge notch were changed in three different value i.e., 10%, 30% and 50% of glue length. Filling thickness were changed in three different value of 3 mm, 6 mm and 9 mm. Tensile strengths of glue and concrete were 2.37 MPa and 6.4 MPa, respectively. The load was applied at a constant rate of 1 kg/s. Results shows that hole diameter, length of edge notch, filling thickness and filling length have important effect on the tensile behavior of joint filling. In fixed glue thinks and fixed joint length, the tensile strength was decreased by increasing the hole diameter. Comparing the results showed that the strength, failure mechanism and fracture patterns obtained numerically and experimentally were similar for both cases.