• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.11-17
• /
• 2005

A lot of small-scale reservoirs that is extravagant in whole country are controlled state or real condition that correct data about the practice contents is not equipped all up to now. In this study, YungNam districts that region Gyeong-Ju city reservoir is distributed much of when flow speedily choose 23 peace among 73 small scale reservoir and experimented. Acquired data every 5 seconds, and user E/S and user value TS for orthocenter to 1 second interval and executes present condition measurement using RTK-GPS. Could was wave and state that reservoir of 15 places (about 65%) gives protective care that do 3D modelling with acquired data, and now correct contents about reservoir state past through comparative analysis with data. Also, area of full water and wave that analyze effective storage and area of full water of 23 places reservoir could know that 20.63%, effective storage decreased as 3.34%. I wish to contribute about analysis about present reservoir state through this and method the adminstration direction.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.1
• /
• pp.7-16
• /
• 2004

The tool path needs to be determined in an efficient manner to generate the final NC (numerical control) code for efficient machining. This is particularly important in machining free form pockets with an arbitrary wall geometry on a three-axis CNC machine. Many CAD/CAM systems use linear interpolation to generate NC tool paths for curved surfaces. However, this needs to be modified to improve the smoothness of the machined bottom surface, reduce machining time and CL (cutter location) file size. Curved machining can be a solution to reduce these problems. The unified rough and finish cut algerian and the tool motion is graphically simulated. In this paper, a grid based 3D navigation algorithm for generating NC tool path data for both linear interpolation and a combination of linear and circular interpolation for three-axis CNC milling of general pockets with sculptured bottom surfaces is developed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.323-328
• /
• 2019

In order to construct 3D geospatial information about the terrain, current measurement using a total station, remote sensing, GNSS(Global Navigation Satellite System) have been used. However, ground survey and GNSS survey have time and economic disadvantages because they have to be surveyed directly in the field. In case of using aerial photographs and satellite images, these methods have the disadvantage that it is difficult to obtain the three-dimensional shape of the terrain. The terrestrial LiDAR can acquire 3D information of X, Y, Z coordinate and shape obtained by scanning innumerable laser pulses at densely spaced intervals on the surface of the object to be observed at high density, and the processing can also be automated. In this study, terrestrial LiDAR was used to analyze slope displacement. Study area slopes were selected and data were acquired using LiDAR in 2016 and 2017. Data processing has been used to generate slope cross section and slope data, and the overlay analysis of the generated data identifies slope displacements within 0.1 m and suggests the possibility of using slope LiDAR on land to manage slopes. If periodic data acquisition and analysis is performed in the future, the method using the terrestrial lidar will contribute to effective risk slope management.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.44-52
• /
• 2001

A modeling program was developed in Part I which represents the 3-D geometry, produces bill of material, automatically draws drawings and produces input data for structural analysis of Very High-rise Steel Artificial Reefs(VEHSAR). Model tests were carried out to measure drag forces acted on VEHSAR in the Ocean Engineering Wide Tank, the University of Ulsan and structural analyses were made to simulate structural behaviors of VEHSAR. The integrated package system is suggested to design VEHSAR with different geometries.

• Spatial Information Research
• /
• v.23 no.1
• /
• pp.41-48
• /
• 2015

BIM Technology contains data from the life cycle of facility through 3D modeling. For these, one building products the huge file because of massive data. One of them is IFC which is the standard format, and there are issues that large scale data processing based on geometry and property information of object. It increases the rendering speed and constitutes the graphic card, so large scale data is inefficient for screen visualization to user. The light weighting of large scale BIM data has to solve for process and quality of program essentially. This paper has been searched and confirmed about light weight techniques from domestic and abroad researches. To control and visualize the large scale BIM data effectively, we proposed and verified the technique which is able to optimize the BIM character. For operating the large scale data of facility on web based GIS platform, the quality of screen switch from user phase and the effective memory operation were secured.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.4
• /
• pp.237-242
• /
• 2022

Acquiring high-quality images in control and measurement systems is one of the important factors. Among image acquisition technologies, SFF (Shape from Focus) is a technology for recovering a 3D shape by acquiring 2D images with different focus levels by moving an object at a predetermined step size along the optical axis. For SFF, when an object is moved at a constant step size, mechanical vibration, referred as jitter noise, occurs in each step along the optical axis. In this paper, a new state estimation filter is designed and applied for reducing the jitter noise. For the application of the proposed method, the jitter noise and focus curves are modeled as Gaussian function. Experimental results demonstrate the effectiveness of proposed method.

• Journal of the Korean Society of Costume
• /
• v.66 no.8
• /
• pp.46-60
• /
• 2016

Countries have different brassiere patterns, and this study produced and compared 3/4 brassiere patterns from different countries to determine the difference in patterns, and to investigate the stress distribution and shape of cross section while wearing brassieres using 3D virtual fitting system. Despite the growing interest in underwear, there is a lack of related books and research on brassiere patterns, which causes the difference in sizes and pattern drafting methods by countries. Thus, research on this is needed. 3D virtual fitting system has been introduced to compare patterns, thereby improving visible effects and reducing the loss in cost caused by underwear pattern fitting test. According to the result of pattern analysis, The Secoli type exhibited the least breast cover rate (14.9 cm), while the largest cover rate was shown in Christina and ESMOD types (17.7 cm). It is believed that the difference in pattern drafting causes the difference in the total length of a brassiere. Furthermore, the Secoli, Moda Burgo, and ESMOD brassieres drafted from basic bodice pattern were found to be longer than the Christina and Han Sunmi brassieres attained from direct pattern drafting. Moreover, the darts' volume of upper and lower cups in Christina and Han Sunmi types was similar in shape. The shapes of cradle drafted from basic bodice pattern were a straight line, while those from direct drafting formed a curved shape. In fitting multiple cross sections, the Secoli, Moda Burgo, and ESMOD brassieres had gaps between the brassieres and the body. Among these, the largest number of gaps was observed in the ESMOD type pattern. This study aimed at performing comparative analysis of various brassieres' pattern drafting types as a basic research for developing a brassiere pattern drafting type.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.461-468
• /
• 2008

The needs for visualizing interactive multimedia contents on portable devices with realistic three dimensional shapes are increasing as new ubiquitous services are coming into reality. Especially in digital fashion applications with virtual reality technologies for clothes of various forms on different avatars, it is required to provide very high quality visual models over mobile networks. Due to limited network bandwidths and memory spaces of portable devices, it is very difficult to transmit visual data effectively and render realistic appearance of three dimensional images. In this thesis, we propose a compression method to reduce three dimensional data for digital fashion applications. The three dimensional model includes animation of avatar which require very large amounts of data over time. Our proposed method utilizes temporal and spatial coherence of animation data, to reduce the amount. By grouping vertices from three dimensional models, the entire animation is represented by a movement path of a few representative vertices. The existing three dimensional model compression approaches can get benefits from the proposed method by reducing the compression sources through grouping. We expect that the proposed method to be applied not only to three dimensional garment animations but also to generic deformable objects.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.779-784
• /
• 2008

가상현실 시스템에서 체험자가 현실과 같은 몰입을 느끼기 위해서는 하드웨어를 통한 가상환경 구축과 체험자와의 상호작용이 중요하다. 본 논문에서는 위치 추적 시스템(Motion Tracking System), Wand(3D Mouse) 및 HoloPoint 등 다양한 VR 인터페이스를 통해 체험자의 움직임, 위치, 동작을 인식하고 대형 멀티 디스플레이 시스템을 통해 입체영상을 제공하는 가상환경을 구축하고 체험자가 원하는 정보를 상호작용(Interaction)으로 제공할 수 있는 가상 캠퍼스 안내 시스템을 구현하고자 한다. 가상 캠퍼스 구축은 캠퍼스의 지형, 건물 및 구조물들의 정확한 형상을 얻기 위해 3D 스캐너를 이용하였고 획득된 데이터는 일련의 과정들을 거쳐 3D 모델로 생성된다. 이렇게 생성된 모델을 재배치 및 최적화하기 위해 모델링 소프트웨어를 사용하였다. 구축된 가상 캠퍼스와 위치 추적 시스템 및 Wand의 연동을 위해 VR 프로그래밍 하여 체험자의 움직임 및 동작을 콘텐츠에 그대로 적용시켰다. 여기에 키오스크 유형의 HoloPoint를 이용하여 체험자의 손동작으로 상호작용하는 안내시스템도 구축하였다. 상호작용 가능한 가상캠퍼스 안내 시스템은 가상현실 시스템 구축에 대한 또 다른 방법과 활용 예를 제시함으로써 가상전시관 및 가상체험관 등에 활용될 수 있을 것으로 기대된다.

• Journal of KIISE:Software and Applications
• /
• v.35 no.10
• /
• pp.616-626
• /
• 2008

The face shape extracted by the depth values has different appearance as the most important facial feature information and the face images decomposed into frequency subband are signified personal features in detail. In this paper, we develop a method for recognizing the range face images by combining the multiple frequency domains for each depth image and depth fusion using fuzzy integral. For the proposed approach, the first step tries to find the nose tip that has a protrusion shape on the face from the extracted face area. It is used as the reference point to normalize for orientated facial pose and extract multiple areas by the depth threshold values. In the second step, we adopt as features for the authentication problem the wavelet coefficient extracted from some wavelet subband to use feature information. The third step of approach concerns the application of eigenface and Linear Discriminant Analysis (LDA) method to reduce the dimension and classify. In the last step, the aggregation of the individual classifiers using the fuzzy integral is explained for extracted coefficient at each resolution level. In the experimental results, using the depth threshold value 60 (DT60) show the highest recognition rate among the regions, and the depth fusion method achieves 98.6% recognition rate, incase of fuzzy integral.