• ETRI Journal
• /
• v.37 no.4
• /
• pp.667-676
• /
• 2015

The third-party FFT IP cores available in today's markets do not provide the desired speed demands for optical communication. This study deals with the design and implementation of a 256-point Radix-4 100 Gbit/s FFT, where computational steps are reconsidered and optimized for high-speed applications, such as radar and fiber optics. Alternative methods for FFT implementation are investigated and Radix-4 is decided to be the optimal solution for our fully parallel FPGA application. The algorithms that we will implement during the development phase are to be tested on a Xilinx Virtex-6 FPGA platform. The proposed FFT core has a fully parallel architecture with a latency of nine clocks, and the target clock rate is 312.5 MHz.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.507-511
• /
• 1999

A 10 GHz timing extracted signal which is phase-locked to a 10 Gbit/s mode-locked optical fiber laser pulse train is obtained using a tour-wave-mixing signal in semiconductor optical amplifier. The phase-locked loop wm, demonstrated ~Llccessful1y over 8 hours and found to have the lock-in frequency range of 30 KHz. 0 KHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.1-9
• /
• 2005

We have studied the dispersion properties of a 40 channel x 10 Gbit/s wavelength division multiplexer(WDM) transmission link using standard single mode fiber with all EDFA amplification over 30 x 100 km spans. The dispersion map of the link was investigated by adding fiber sections with positive or negative dispersion at the transmitter, within each amplifier span, and at the receiver. Optimum combinations of these dispersive fiber lengths were attained to significantly enhance the overall transmission performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.345-353
• /
• 2011

An 1.485 Gbit/s video signal transmission system using the carrier frequency of H-band(220~325 GHz) was implemented and demonstrated for the first in domestic. The RF front-end was composed of Schottky barrier diode sub-harmonic mixers(SHM) and frequency triplers, and diagonal horn antennas for transmitter and receiver, respectively. The transmitted carrier frequency of 246 GHz was implemented in the H-band, and LO frequencies of H-band SHM is 120 GHz and 126 GHz for transmit and receive chains, respectively. The modulation scheme is ASK(Amplitude Shift Keying) where IF frequency is 5.94 GHz and the envelop detection was used in heterodyne receiver architecture, and direct detection receiver using ZBD(Zero Bias Detector) was implemented as well. The 1.485 Gbit/s video signal with HD-SDI format was successfully transmitted over wireless link distance of 5 m and displayed on HDTV at the transmitted average output power of 20 ${\mu}W$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6B
• /
• pp.568-574
• /
• 2009

320km optical transmission link for 128 channel DWDM (dense wavelength-division-multiplexing) signals is simulated and fabricated. An optical fiber amplifier for the link is composed of a distributed Raman amplifier and dual C/L-band EDFAs which are optimized for the performances of an optical amplifier obtained from the simulation. Gain and NF of the optimized EDFAs are above 19dB and below 7.5dB, respectively. The resultant OSNRs (optical signal to noise ratios) of the link are average 25dB on each band.

• Journal of the Optical Society of Korea
• /
• v.17 no.1
• /
• pp.57-62
• /
• 2013

We have numerically implemented a receiver side all-optical signal processing method, i.e. optical backward propagation (OBP), by dispersion compensating fiber (DCF) and non-linear compensator (NLC) devised by effective negative Kerr non-linear coefficient using two highly non-linear fibers (HNLFs). The method is implemented for the post-processing of fiber transmission impairments, i.e. chromatic dispersion (CD) and non-linearities (NL). The OBP module is evaluated for dual-polarization (DP) m-ary (m=4,16,32,64,256) quadrature amplitude modulation (QAM) in 112 Gbit/s coherent transmission over 1200 km standard single mode fiber (SMF). We have also investigated an intensity limited optical backward propagation module (IL-OBP) by using a self-phase modulation-based optical limiter with an appropriate pre-chirping to compensate for the intensity fluctuations in the transmission link. Our results show that in highly non-linear sensitive 256QAM transmission, we have observed a 66% increase in the transmission distance by implementing IL-OBP as compared to conventional OBP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.311-317
• /
• 2013

In this paper, we proposed high speed LDPC decoding algorithm based on DVB-S2 standard for applying marine communications in order to multimedia transmission. For implementing the high speed LDPC decoder, HSS algorithm which reduce the iteration numbers without performance degradation is applied. In HSS algorithm, check node update units are update at the same time of bit node update. HSS can be accelerated to the decoding speed because it does not need to separate calculation of the bit nodes, However, check node calculation blocks need many clocks because of just one memory is used. Therefore, this paper proposed partial memory structure in order to reduced the delay and high speed decoder is possible. The results of the simulation, when the max number of iteration set to 30 times, decoding throughput of HSS algorithm is 326 Mbit/s and decoding speed of proposed algorithm is 2.29 Gbit/s. So, decoding speed of proposed algorithm more than 7 times could be obtained compared to the HSS algorithm.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.564-568
• /
• 2006

Using the cross-gain modulation (XGM) characteristics of semiconductor optical amplifiers (SOAs), multi-functional all-optical logic gates, including XOR, AND, and OR gates are successfully simulated and demonstrated at 10Gbit/s. A VPI component maker^TM simulation tool is used for the simulation of multi-functional all-optical logic gates and the10 Cbit/s input signal is made by a mode-locked fiber ring laser. A multi-quantum well (MQW) SOA is used for the simulation and demonstration of the all-optical logic system. Our suggested system is composed of three MQW SOAs, SOA-1 and SOA-2 for XOR logic operation and SOA-2 and SOA-3 for AND logic operation. By the addition of two output signals XOR and AND, all-optical OR logic can be obtained.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.270-271
• /
• 2004

첩 광섬유 격자를 이용하여 10Gbit/s이상의 광통신 시스템에서 이용될 수 있는 광통신용가변 색분산 보상기를 제안하엿다. U형태의 구부림을 이용함으로써 중심 파장의 이동은 0.1nm미만, 분산값이 이동 스테이지의 움직임에 따라 선형적으로 변하는 가변분산보상기를 제작하였다.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.68-74
• /
• 2006

We have extracted an optical clock signal from a return-to-zero(RZ) pseudorandom bit sequence(PRBS) and non-return-to-zero(NRZ) PRBS data in a pulsation multi-section laser diode with DFB reflector. The ms timing jitter achieved less than 1 ps for the input 11.727 Gbit/s RZ PRBS and NRZ PRBS data. The PRE data wasconverted from the NRZ data using an NRZ to pseudo-return to zero(PRZ) converter module. The optical clock was extracted from the PRZ data which contains the clock components. Although the input PRZ data gives a timing jitter of 2 ps, the extracted clock has timing jitter of ${\~}$1 ps.