• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.3001-3004
• /
• 2014

A series of hydroxyl-derivatized quaternized polymers were successfully synthesized by atom transfer radical polymerization (ATRP) and Cu(I)-catalyzed 1,3-dipolar cycloaddition of azide and alkynes (click chemistry), followed by quaternization reactions. ATRP was employed to synthesize poly(2-hydroxyethyl methacrylate) (PHEMA), followed by introduction of alkyne groups using pentynoic acid, leading to HEMA-Alkyne. 2-Azido-1-ethanol and 3-azido-1-propanol were combined with the HEMA-Alkyne backbone via click reaction, resulting in triazole-ring containing hydroxyl-derivatized polymers. Quaternization reactions with methyl iodide were conducted on the triazole ring of each polymer. Molecular weight, molecular weight distribution, and the degree of quaternization (DQ) were determined by gel permeation chromatography (GPC) and $^1H$ NMR spectroscopy. The average molecular weight ($M_n$) of the resulting polymers ranged from $5.9{\times}10^4$ to $1.05{\times}10^5g/mol$ depending on the molecular architecture. The molecular weight distribution was low ($M_w/M_n$ = 1.26-1.38). The transmission spectra of the 0.1 wt % aqueous solutions of the resulting quaternized polymers at 650 nm were measured as a function of temperature. Results showed that the upper critical solution temperature (UCST) could be finely controlled by the level of DQ.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.295-301
• /
• 2012

Efficient stitching methods for the synthesis of Fr$\acute{e}$chet-type dendrimers with linear PEG units at a core were elaborated. The synthetic strategy involved an inexpensive 1,3-dipolar cycloaddition reaction between an alkyne and an azide in the presence of Cu(I) species which is known as the best example of click chemistry. The linear core building blocks, two diazido-PEG units, were chosen to serve as the azide functionalities for dendrimer growth via click reactions with the alkyne-dendrons. These two building blocks were employed together with the alkyne-functionalized Fr$\acute{e}$chet-type dendrons in a convergent strategy to synthesize two kinds of Fr$\acute{e}$chet-type dendrimers with different linear core units.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.67-71
• /
• 2009

The stitching method for the synthesis of $Fr\acute{e}chet$-type dendrimers was elaborated using click chemistry between an alkyne and an azide. The core building block, 4,4'-(3,5-bis(azidopropyloxy)benzyloxy)bisphenyl, was designed to serve as the azide functionalities for dendrimer growth via click reactions with the alkyne-dendrons. The synthetic strategy involved an 1,3-dipolar cycloaddition reaction between an azide and an alkyne-functionalized $Fr\acute{e}chet$-type dendrons in the presence of Cu(I) species which is known as the best example of click chemistry.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.165-168
• /
• 2015

Thermoresponsive polymers were successfully synthesized by a combination of atom transfer radical polymerization (ATRP) and Cu(I)-catalyzed 1,3-dipolar cycloaddition of azide and alkynes (click chemistry). Poly(2-hydroxyethyl methacrylate) (PHEMA) was synthesized by ATRP, followed by introduction of alkyne groups using pentynoic acid, leading to HEMA-alkyne. Homopolymers having secondary amine groups, tertiary amines with hydroxyethyl and hydroxypropyl groups were synthesized by adding 2-azido-N-ethyl-ethanamine, 2-[(2-azidoethyl)amino]ethanol, and 2-[(2-azidoethyl)amino]propanol, respectively, to the PHEMA-alkyne backbone using click chemistry. Molecular weight (MW), molecular weight distribution (MWD), and click reaction efficiency were determined by gel permeation chromatography (GPC) and $^1H$ NMR spectroscopy. The transmission spectra of the 1.0 wt% aqueous solutions of the resulting polymers at 650 nm were measured as a function of temperature. Results showed that the lower critical solution temperature (LCST) could be easily controlled by the length of the hydroxyalkyl groups.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.1
• /
• pp.61-64
• /
• 2000

A series of 5-oxaproline peptide derivatives was synthesized and evaluated for its ability to inhibit the prolyl 4-hydroxylase in vitro. Structure-activity studies show that the 5-oxaproline sequences, prepared by the 1,3-dipolar cycloaddition of the C-methoxycarbonyl-N-mannosyl nitrone in the presence of the ethylene, are more active than the corresponding proline derivatives. Prolyl 4-hydroxylase belongs to a family of $Fe^{2+}-dependent$ dioxygenase, which catalyzes the formation of 4-hydroxyproline in collagens by the hydroxylation of proline residues in -Gly-Xaa-Pro-Gly- of procollagen chains. In this paper we discover the more selective N-Cbz-Gly-Phe-Pro-Gly-OEt $(K_m\;=\;520\;{\mu}M)$ sequences which are showed stronger binding than others in vitro. Therefore, we set out to investigate constrained tetrapeptide that was designed to mimic the proline structure of pep tides for the development of prolyl 4-hydroxylase inhibitor. From this result, we found that the most potent inhibitor is N-Dansyl-Gly-Phe-5-oxaPro-Gly-OEt $(K_i\;=\;1.6\;{\mu}M)$. This has prompted attempts to develop drugs which inhibit collagen synthesis. Prolyl 4-hydroxylase would seem a particularly suitable target for antifibrotic therapy.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.69-77
• /
• 1998

(3S,4S)-1-(t-Butoxycarbonylmethyl)-3-[(S)-1-(t-butyldimethylsilyloxy)ethyl]-4-(2-diazo-2-ethoxycarbonyl-1-oxoethyl)-2-azetidinone (14) was prepared from 4-styryl-2-azetidinone 7b via a sequence of reactions involving N-alkylation with bromoacetate, ozonolysis, oxidation, condensation with magnesium ethyl malonate, and diazo transfer reaction. (3S,4S)-3-[(S)-1-(t-Butyldimethylsilyloxy)ethyl]-4-(3-diazo-3-ethoxycarbonyl1-hydroxypropyl)-2-azetidinone (21) was also prepared from 4-formyl-2-azetidinone 5b via a sequence of reactions involving Wittig reaction, 1,3-dipolar cycloaddition with ethoxycarbonylformonitrile oxide, catalytic hydrogenation, and diazotization. However, the final cyclization of 14 or 21 to 1-hydroxycarbapenem or 1-hydroxycarbapenam by treating with $Rh_2(OAc)_4$ was unsuccessful.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.9
• /
• pp.2694-2698
• /
• 2014

A multisegmented polystyrene (PS) with pH-cleavable ester and carbamate linkages was successfully synthesized by a combination of atom transfer radical polymerization (ATRP) and Cu(I)-catalyzed 1,3-dipolar cycloaddition of azide and alkynes (click chemistry). ATRP was employed to synthesize polystyrene from hydroxyl-terminated initiator using CuBr/N,N,N',N",N"-pentamethyldiethylenetriamine (PMDETA) as the catalyst. The reaction of the resulting PS with sodium azide yielded the azido-terminated polymer. The hydroxyl group in the other end of the polymer was reacted with 4-nitrophenyl chloroformate (NPC), followed by reaction with propargylamine to produce an alkyne end group with a carbamate linkage. The PS with an alkyne group in one end and an azide group in the other end was then self-coupled in the presence of CuBr/2,2'-bipyridyl (bpy) in DMF to yield a desired multisegmented PS. Molecular weight and molecular weight distribution of the self-coupled polymer increased with time, as in the typical step-growth-type polymerization processes. Finally, we demonstrated that the ester and carbamate linkages of the multisegmented PS were hydrolyzed in the presence of HCl to yield individual PS chains.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2193-2199
• /
• 2012

A series of novel polytriazoleimides were prepared from various aromatic dianhydrides and a new kind of 1,2,3-triazole-containing aromatic diamine synthesized by the Cu (I)-catalyzed 1,3-dipolar cycloaddition reaction in DMAc, and characterized by FT-IR, $^1H$-NMR, XRD, DSC and TGA techniques. The results show the polytriazoleimides are soluble in most of strong polar solvents and have inherent viscosity values of 0.51-0.62 dL/g(DMAc). The polytriazoleimide films exhibit a tensile strength of 62.3-104.5 MPa and an elongation at breakage of 4.0-8.1%, a glass transition temperature ($T_g$) of $257-275^{\circ}C$, a decomposition temperature (at 5% weight loss) of $350-401^{\circ}C$ in $N_2$ atmosphere, and a dielectric constant of 2.47-3.01 at 10 MHz, which depend on the structure of the polymers. The polytriazoleimides perform good resistance to acid and alkali solution.

• Macromolecular Research
• /
• v.17 no.7
• /
• pp.499-505
• /
• 2009

General, fast, and efficient stitching methods are presented for the synthesis of Fr$\acute{e}$chet-type dendrimers with linear units at a core, as a preliminary investigation for the synthesis of dendritic-linear-dendritic materials. The synthetic strategy involved an inexpensive, 1,3-dipolar, cycloaddition reaction between an alkyne and an azide in the presence of the Cu(I) species, which is known as the best example of click chemistry. The linear core building blocks, 1,7-octadiyne and 1,6-diazidohexane, were chosen to serve as the alkyne and azide functionalities for dendrimer growth via click reactions with the azide and alkyne-dendrons, respectively. These two building blocks were employed together with the azide- and alkyne-functionalized Fr$\acute{e}$chet-type dendrons in a convergent strategy to synthesize two kinds of Fr$\acute{e}$chet-type dendrimers with different linear core units. This comparative efficiency of the click methodology supports the fast and efficient synthesis of dendritic-linear-dendritic materials with the tailor made core unit.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2603-2606
• /
• 2010

Novel soluble triazoleimide oligomers terminated with arylacetylene terminated were synthesized by the Cu(I)-catalysed 1,3-dipolar cycloaddition polymerization of diazides and imide-containing dialkyne. Several molecular weight triazoleimide oligomers were prepared from diazide and dialkyne monomers with different stoichiometric combinations. The curing behaviors of the oligomers were tested by differential scanning calorimetry (DSC). The thermal properties of the cured products were evaluated by DSC and thermogravimetric analysis (TGA). These cured oligomers showed the glass transition temperature of about $225-235^{\circ}C$ and the decomposition temperature (at 5% weight loss) of about $385-393^{\circ}C$ in nitrogen.