• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.5
• /
• pp.437-445
• /
• 2018

Devices have a lot of small breakdowns rather than big breakdowns. But it often wastes time and increases cost of maintenance, such as calling a service technician for small breakdowns. So, if we use remote control and monitoring service using Internet of Things, we can minimize the time period and cost for the maintenance. However, security is important because remote control and monitoring services contain personal information which when leaked, may be dangerous. There are many types of Internet based monitoring devices that are in use, but it is difficult to expect a high level of security because there are many cases in which the performance is minimal. Therefore, in this paper, we classify remote control and monitoring services based on Internet of Things type and derive encryption requirement for four types. We also compared and analyzed the lightweight cryptographic algorithms that can be expected to use high performance even on the Internet of Things. And it is derived that LED is used as a equipment management type, DESLX as a environment management type, CLEFIA as a healthcare management type and LEA as a security management type are the optimal lightweight cryptographic algorithms for each type.

• Journal of Korea Multimedia Society
• /
• v.11 no.2
• /
• pp.228-236
• /
• 2008

Recently augmented reality technology has been researched to view the virtual shape of buildings before construction or cultural heritages under recovery. Those researches used special devices or markers that are not applicable in long distanced outdoor environment. Also the server had to compute a lot of transformations for the location changes of virtual objects. This paper proposed a mobile augmented reality system that uses GPS and accelerometer sensors in order to compute the virtual object's locations without using markers. The server determines the position and orientation by comparing the GPS data obtained from the client with the predefined 3D object informations in the server. If the server sends the virtual object informations such as the position, orientation and matching information, then the client matches the virtual object on the screen of mobile camera phone. In addition, the client computes the transformations of location change detected by the accelerometer derived from the user's movement without additional connection to the server.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.85-91
• /
• 2009

Recently, the LCD has high market share in TV market. The use of motion images in portable devices like DMB, PMP and Cell Phone is growing rapidly. One of the technique of enhancing the LCD's characteristic which is the slow response time. But, the technique requires a lot of memory usage, because of the requirement of frame memory. In this paper, we propose a reduction method for the frame memory that is required for LCD overdrive. Proposed overdrive architecture based on modified DWT-Inverse DWT and Color Conversion. The proposed architecture has a considerable PSNR. At once, it uses 50% of frame memory size and reduces 15% of frame memory size compare with previous architecture. The design was implemented using Xilinx Vertex4 and had 2172 Slice except Memory.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.126-136
• /
• 2014

In the Advanced Driver Assistance Systems (ADAS) of smart vehicle and Intelligent Transportation System (ITS) for to detect the boundary of lane is being studied a lot of Hough Transform. This method detects correctly recognition the lane. But recognition rate can fall due to detecting straight lines outside of the lane. In order to solve this problems, this paper proposed an algorithm to recognize the lane boundaries and the accumulator cells in Hough space. Based on proposed algorithm, we develop application for Android was developed by H/W verification. Users of smart phone devices could use lane detection and lane departure warning systems for driver's safety whenever and wherever. Software verification using the OpenCV showed efficiency recognition correct rate of 93.8% and hardware real-time verification for an application development in the Android phone showed recognition correct rate of 70%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.27-30
• /
• 2016

in this paper, to improve the narrow bandwidth problem of the microstrip antenna for WLAN and WiFi dual band array antenna was designed to satisfy the bandwidth of 3.6GHz and 5.2GHz it contained with IEEE 802. 11. The substrate of proposed microstrip array antenna is FR-4(er=4.3) and $25mm{\times}45mm{\times}0.8mm$ size and thickness t=0.035mm, and the simulation was used for CST Microwave Studio 2014. input return loss compared -10dB less than operates at and when gain 3.6GHz 2.516dB, 5.2GHz showed the results of 3.581dB. the antenna designed to be miniaturized and the be used in electronic devices such as mobile phone.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.221-226
• /
• 2018

Special-purposed vehicles are customized according to the user's requirements. When these vehicles are out of oder, they are costly and time consuming to repair. In order to solve these problems, we want to remotely check whether the vehicle is abnormal and remotely identify the fault area, thereby shortening the repair cost and the repair period. In this study, the faulty part of the electric control part is automatically identified, and it is immediately grasped through the user's mobile phone application and an instant fault code is notified to the car manufacturer for quick and smooth fault repair. In order to realize this, we want to build a system that uses the technology of IoT to determine the fault area according to the items required in the field of the special purpose vehicle and notify the manufacturer of the fault on its own.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.118-118
• /
• 2015

플렉서블 기판을 기반으로 하는 휴대용 기기는 다양한 형태로 가공이 가능하고 가벼워 휴대가 용이하며 충격에 강하여 내구성이 좋은 장점을 가지고 있으나 플렉서블 전극 개발이 어려운 문제가 있다. 플렉서블 전극으로 그래핀, 은나노선, 금속메쉬 등의 다양한 재료, 구조에 대한 연구가 진행되고 있으며 특히 은나노선 전극은 공정이 단순하고 투과도 및 전도도가 비교적 우수하녀 가장 강력한 후보재료로 알려져 있다. 그러나 은나노선은 표면거칠기가 매우 크고 헤이즈가 발생하여 OLED 디스플레이용 전극으로 응용시 화면의 선명도가 떨어지며 은나노선 네트워크 형성시 은나노선간의 접촉저항이 증가하는 문제를 가지고 있다. 이러한 문제를 해결하기 위해 최근 산화그래핀을 적용하여 은나노선의 투과도, 전도도, 표면거칠기를 개선하는 연구가 진행되고 있다. 본 연구에서는 은나노선과 산화그래핀 나노복합체를 형성하고 플렉서블 기판에 전사하는 공정방법을 통해 투명전극을 형성하였고 산화그래핀이 포함되지 않은 전극과 비교하여 전극의 성능이 향상됨을 확인하였다. 주사전자현미경 측정을 통해 플렉서블 기판에 포함된 산화그래핀-은나노선 전극의 구조적 특성을 조사하였고 면저항측정을 통해 산화그래핀 처리로 인해 전기적 특성이 개선되는 결과를 확인하였다. 전도도 개선의 원인을 조사하기 위해 라만, XPS, 투과도 측정결과를 분석하여 그래핀에 포함된 pyridinic 질소가 감소하고 quaternary 질소가 증가하며 이로 인해 defect sites의 수가 감소하는 결과를 확인하였다. 산화그래핀과 은나노선의 접합부분에서 산화그래핀의 quaternary 질소가 증가하고 산화그래핀에 전하밀도를 증가하여 전도도를 향상하였다. 투과도 측정을 통해 은나노선의 가로방향 플라즈몬 공명 흡수가 산화그래핀 처리에 의해 감소한 결과를 확인하였다. 산화그래핀-은나노선 나노복합체의 전도도 향상 원인에 대한 연구는 은나노선의 플렉서블 전극 응용을 가속화하고 잠재적인 응용분야를 확대하기 위한 원천지식을 제공할 것이다.

• 전자공학회논문지 IE
• /
• v.47 no.2
• /
• pp.13-20
• /
• 2010

This paper describes a current mode PWM DC-DC converter IC for battery charger and supply power converter for portable electronic devices. The maximum supply voltage of IC is 40[V] and 2.8[V]~330[V] DC input power is converted to higher or programmed DC voltage according to external resistor ratio or wire winding ratio of transformer. The maximum supply output current is 3[A] over and voltage error of output node is within 3[%]. The whole circuit needed current mode PWM DC-DC converter circuit is designed. The package dimensions and number of external parts are minimized in order to get a smaller hardware size. The power consumption is smaller then 1[mW] at stand by period with supply voltage of 3.6[V] and maximum energy conversion efficiency is about 86[%]. This device has been designed in a 0.6[um] double poly, double metal 40[V] CMOS process and whole chip size is 2100*2000 [um2].

• Journal of KIISE:Software and Applications
• /
• v.32 no.4
• /
• pp.258-267
• /
• 2005

We propose the ubiFloor system to track and recognize users in ubiquitous computing environments such as ubiHome. Conventional user identification systems require users to carry tag sensors or use camera-based sensors to be very susceptible to environmental noise. Though floor-type systems may relieve these problems, high cost of load cell and DAQ boards makes the systems expensive. We propose the transparent user identification system, ubiFloor, exploiting user's walking pattern to recognize the user with a set of simple ON/OFF switch sensors. The experimental results show that the proposed system can recognize the 10 enrolled users at the correct recognition rate of $90\%$ without users' awareness of the system.

• Journal of The Korean Association of Information Education
• /
• v.9 no.1
• /
• pp.27-37
• /
• 2005

Advances in the wireless Internet have led to the rise of diverse techniques which can access information regardless of time and place. There are many research efforts to identify the various ways to use a cellular phone in our everyday life. However, it has been rarely used in the elementary school. As an attempt to apply the wireless Internet technology to the elementary school, this study is to design and implement a wireless Internet homepage where the parents would be able to have an easy access to the information any place and any time. The characteristics of the wireless Internet homepage are as follows; first, the images were reduced to the minimum and the text-oriented information is mostly used to deliver the key information, considering the small screen and relatively slow transmission rates. Second, by providing a link set up between the wireless homepage and the wired Internet homepage, users can choose the more convenient access tool. Finally, the SMS (Short Message Service) messages could be used for an immediate delivery of information.