• Journal of the Korea Society for Simulation
• /
• v.25 no.1
• /
• pp.45-52
• /
• 2016

In this study, we consider a capacity planning problem of reentrant hybrid flowshops. High-tech electronic products such as semiconductor or TFT-LCD, are produced from manufacturing systems which can be considered as reentrant hybrid flowshops. In the considered capacity planning problem, we determine the number of machines at each stage in the manufacturing system. We introduce criteria indicating which stage needs additional machines or which stage needs reduction of machines considering the characteristics of the product types and the manufacturing system. The objective function of the problem is maximizing throughput rate of the system, of which values are obtained from the simulation model depicting the hybrid flowshops. The performance of the proposed methods were evaluated through a series of computational experiments. The simulation model was also used for conducting the comparison experiments among the proposed method and benchmarks.

• Journal of the Korea Society for Simulation
• /
• v.20 no.3
• /
• pp.1-10
• /
• 2011

In this study, we consider a capacity planning problem where the number of machines at each workstation is determined in manufacturing systems of top-edge electronic products such as semiconductor or display. The considered manufacturing system is the typical hybrid flowshop which has identical parallel machines at each workstation and the setup operation occurs when the types of consecutively processed products are different. The objective of the problem is finding good combinations of the numbers of machines at all workstations, under the given capital amount for purchasing machines. Various heuristic methods for determining the numbers of machines at workstations are proposed and the performances were tested through a series of computational experiments. In the study, a simulation model has been developed in order to simulate the considered manufacturing system with dynamic orders and complex process. The simulation model is also used for conducting the computational comparison test among various proposed methods.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.240-246
• /
• 2012

논문은 병렬 설비로 이루어진 다수의 단계를 포함하는 재방문이 있는 혼합흐름공정의 계획 문제를 다룬다. 재방문작업에서 제품은 몇몇 공정을 여러 번 방문하게 되고 이로 인하여 재공의 혼잡과 장비의 유휴의 원인이 된다. 이 상황에서는 생산성과 고객 만족도를 향상 시키는 것이 중요한 이슈이다. 따라서 본 논문은 혼합흐름공정에서 스루풋을 최대화하고 지연된 고객 수요를 최소화하기 위해 우선순위 목표계획법 기반의 휴리스틱 방법들을 제안한다. 그리고 이 휴리스틱 방법은 이전 문헌에서 제시된 방법과 비교하여 성능을 비교하였다.

• The Korean Journal of Rheology
• /
• v.10 no.2
• /
• pp.82-91
• /
• 1998

액정고분자/폴리카보네이트 혼합계로 구성된 분자복합계를 쉬트상으로 가공할 때 취 약해지기 쉬운 횡단면 방향의 물성을 향상시키기 위하여 미세섬유상의 배향을 in-situ 상태 로 적절히 제어할수 있는 Simultaneous Convergent-Divergent(SCD) 다이를 설계·제작하 고 압출실험을 수행하여 얻은 압출 쉬트를 대상으로 구조-물성-가공의 상관관계를 조사하 였다. 액정고분자의 첨가 함량에 따른 토오크와 토출량의 변화는 액정고분자를 10wt% 소량 첨가하였음에도 현저한 감소 효과를 보였으며 약 30wt%일 때 최소로되었다. 이는 액정고분 자가 보강 기능외에 가공특성의 개선에도 큰 효과가 있어 가공조제로서의 가능성을 보이는 결과로 혼합계의 유변학적 특성 결과에서도 확인할수 있었다. 또 DSC와 DMA를 이용한 열 분석 결과 액정고분자의 함량이 증가함에 따라 PC의 유리전이온도가 다소 감소하는 현상을 보임에 미루어 이 혼합계는 부분적으로 상용성을 갖는 것으로 볼수 있으며 모폴로지 분석을 통해서도 이를 확인할수 있었다. TLCP/PC 혼합계로 구성되는 분자복합재를 SCD 다이를 사용하여 제조한 압출 쉬트의 방향성에 따른 기계적 물성은 기존의 쉬트 다이보다 흐름방향 으로는 다소 낮은 물성치를 보이지만 횡단면 방향으로는 물성이 현저히 향상됨을 관찰할수 있었다. 모폴로지 분석결과 기존의 쉬트 다이의 경우 벽면 부근에서는 액정고분자가 미세섬 유상으로 형성되어 흐름방향으로 배향되어 있지만 중심부에서는 액정 상태로 존재하는 반 면, SCD 다이의 경우 미세섬유상으로 형성된 액정고분자가 벽면에서부터 중심부로 갈수록 횡단면 방향으로 서서히 배향되어 있음을 확인할수 있었다.

• The Journal of Society for e-Business Studies
• /
• v.20 no.1
• /
• pp.79-88
• /
• 2015

Many servers, such as web and database servers, receive a continual stream of requests. The servers should schedule these requests to provide the best services to users. In this paper, a hybrid genetic algorithm is proposed for scheduling divisible requests without interruption in which the objective is to minimize the total stretch. The stretch of a request is the ratio of the amount of time the request spent in the system to its response time. The hybrid genetic algorithm adopts the idea of seed selection and development in order to improve the exploitation and exploration power of genetic algorithms. Extensive computational experiments have been conducted to compare the performance of the hybrid genetic algorithm with that of genetic algorithms.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3923-3932
• /
• 2000

In mobile network, wireless links may be overloaded due to a high concentratioJl of mobile hosts in a given cell. As a result, the required QOS(Quality of Service) cannot be provided to all flows in that cell. So, there exists adaptive applications which can operate with various bandwidth levels. When a wireless link is overloaded, it can adapt by reducing the bandwidths of flows, is referred to as rate adaptation. In this paper, we analyze the performance of existing rate adaptation methods by simulations. The result of simulation experiments shows that average-fair adaptation scheme has very low network overhead but high bandwidth variance of flows, which causes the worse quality of service. We propose a rate adaptation method refined by combining fair adaptation and average-fair adaptation, and shows the refined method can provide lower bandwidth variance of flows by simulations.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.83-96
• /
• 2005

PVC is the thermoplastic offering excellent material properties. PVC is used in wide variety of applications, however, it causes environmental problems when it is discarded because of its high chlorine content. Since dechlorination reaction of PVC is taking place relatively low temperature compared to the pyrolysis temperature of plastics, study on the dechlorination reaction has been carried out as a pre-treatment process. Twin screw reactor which shows excellent mixing capabilities is employed. Experimental variables are first and second reactor temperature, PVC content in mixed plastics, viscosity of mixed plastics, feeding rate, rotational speed of the second reactor. Over 90% of dechlorination rate can be obtained under proper operation conditions. Chlorine gas evolved from reactor is absorbed in water and can be recovered as a hydrochloric acid. Analysis had been done on chlorine flows by taking material balance over reactor.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.3
• /
• pp.94-102
• /
• 2007

In this paper, we consider a line balancing problem in hybrid flowshops where each workstation has identical parallel machines. The number of machines in each workstation is determined in ways of satisfying pre-specified throughput rate of the system. To minimize the total number of machines in the systems, we propose five heuristic methods and one simulated annealing method. Extensive computational experiments found the superiorities of two heuristic methods and the meta-heuristic.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.3
• /
• pp.37-44
• /
• 2004

국내 반도체 산업은 불과 20년도 안 되는 짧은 기간동안에 괄목할만한 성장을 하여 전세계 반도체 생산 규모 면에서 3위 국가로 부상하였으며, 기술 경쟁력 면에서도 한국인의 자존심을 그나마 지켜왔다. 하지만, 반도체 제조는 가장 복잡한 제조공정의 하나로 분류되며, 이러한 복잡한 시스템을 통제하기 위해서는, 다양한 시스템 조건 하에서 적절한 생산전략을 마련하는 것이 필요하다. 그러나, 반도체 제조 시스템에 대한 다양한 상황과 관련한 연구는 많지 않다. 반도체 제조공정 시스템에 대한 스케줄은 생산공정의 재진입, 공정의 높은 불확실성, 급속하게 변하는 제품과 기술과 같은 특성 때문에 반도체 제조공정 시스템에 대한 스케줄은 복잡하고 어려운 작업이며, 사이클타임의 절감 및 단위시간당 생산량의 증대와 같은 시스템 목적을 달성하기 위하여, 반도체 제조 시스템에 대한 좋은 방법을 발견하기 위한 많은 연구가 있었다. 반도체 산업의 생산 흐름은 가장 독특한 특징을 가지고 있으며 생산계획과 반도체 제조의 스케줄링과 계획을 어렵게 하고 있다. 현재 반도체 조립공정에서 수행되고 있는 일정계획은 단순 FCFS (First Come First Serve)에 의한 할당규칙에 따른다. 또한 Backlog(예비재고)를 1일 생산량을 기준으로 Buffer로 운영하고 있다. 따라서 본 연구에서는 효율적인 재고관리와 정확한 스케줄링이 생산의 경쟁력 확보 우위임을 가정하여 다양한 할당규칙(dispatching rule)을 실시간 적용하여 정확한 일정계획 수립의 효과와 결과를 시뮬레이션을 통해 검증하고자 한다. 제시된 방법론을 위하여 시뮬레이션 접근방법이 사용되었다.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.20-27
• /
• 2006

PVC is the thermoplastic offering excellent material properties. PVC has been used in wide variety of applications, however, it causes environmental problems when it is discarded because of its high chlorine content. Since dechlorination reaction of PVC is taking place at relatively low temperature compared to the pyrolysis temperature of plastics, study on the dechlorination reaction has been carried out as a pre-treatment process. Twin screw reactor which shows excellent mixing capabilities is employed. Experimental variables are the first and second reactor temperature, PVC content in mixed plastics, viscosity of mixed plastics, feeding rate, rotational speed or the second reactor. Over $90\%$ of dechlorination ratio can be obtained under proper operation conditions. Chlorine gas evolved from reactor is absorbed in water and can be recovered as a hydrochloric acid. Analysis had been done on chlorine flows by taking material balance over realtor.