• Journal of the Korean Institute of Gas
• /
• v.10 no.2 s.31
• /
• pp.61-67
• /
• 2006

We developed the ultrasonic phased array technique for obtaining ultrasonic images of electrofusion joints of polyethylene piping. And we inspected 4 cases at fields with this technique. First case is for the 300 mm diameter polyethylene electrofusion joint by using 3.5 MHz phased array sensor, second is for the 350 mm diameter saddle electrofusion joint, third is for the 400 mm diameter electrofusion joints and the last one is for the 400 mm diameter piping joints which will be used at 300 kPa suppling pressure.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.385-386
• /
• 2013

우리나라 해역에서 선박의 대형화, 고속화와 선박교통량의 증가 및 항만과 해양개발 등으로 해상교통 환경은 급속하게 변화하고 있으며, 항로의 좌 우 측방 한계 표시, 항행위해요소의 표시 등의 용도로 사용되는 등 명기는 항만, 연안해역 및 내륙수로에서 통항 선박의 안전을 위하여 그 수요가 점진적으로 늘어나고 있다. 항로표지에 사용하는 등명기의 정기검사는 항로표지법 제31조 및 "항로표지용장비 용품검사기준(해양수산부고시 제2013-101호, 2013.5.8)"에 따라 3년 주기로 수검하여 합격품에 한하여 사용토록 규정하고 있다. 등명기의 정기검사 유효기간에 대한 검증을 위하여 설치장소, 해상여건 등을 고려한 현장시험을 통하여 등명기의 사용 기간에 따른 열화 특성을 조사하고 적정 정기검사주기 및 교체 주기에 대한 분석의 필요성이 대두되고 있는 실정이다. 본 연구에서는 LED 등 명기의 실제 사용 환경에서 사용 경과 시간에 따른 광학적 특성, 전기적 특성 및 외관상태 등을 조사하고 분석하여 사용시간 경과에 따른 LED 등명기의 특성 변화에 대하여 기술하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4145-4150
• /
• 2010

This research aims to design on an automatic machine vision system to replace eye inspection of alternator spool which is one of the key automotive parts. The alternator spool, plastic extrusion part would have various defects like unfinished, crack and burr. Through the design failure examples the optimized fast machine vision system will be designed to inspect all spools also focuses on the low cost machine for the middle sized company as 2'nd automotive supplier. 3-dimensional design softwares of Pro-Engineer & CATIA were used and the system were built based on the design. The system will contribute to satisfy the cycle time and can inspect each part in an absolutely accurate method, which is sufficient for industrial applications.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.245-253
• /
• 2017

The purpose of this field experimental study investigated the positive effects of coaching on emotional intelligence and communication competence. The experimental group(39 university students) had to two months of coaching education and four face-to-face coaching sessions. The control group(39 university students) did not have any coaching education and coaching sessions. To conduct ANCOVA, pre-measurement scores for each dependent variables, emotional intelligence and communication competence, were included as covariates and post-measurement scores were included as dependent variables. In control group, there was no difference between before and after measurement for each dependent variables. However, there was statistically significant difference between before and after measurement for each dependent variables in experimental group. This result confirmed that coaching caused increase in the level of emotional intelligence and communication ability.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.1
• /
• pp.45-51
• /
• 2004

Boiler tubes in power plants are often leaked due to various material degradations including creep and thermal fatigue damage under severe operating conditions such as high temperature and high pressure over an extended period of time. To monitor and diagnose the tubes on site and in real time, the acoustic emission (AE) technology was applied. We developed an AE leak detection system, and used it to study the variation of AE signal from the on-site tubes in response to the changes in the boiler operation condition and to detect the locations of leakage based on it. Detection of leak was performed by acquiring and evaluating the signals in separate regimes of high and low frequency signal. As a result of these studies, we found that on-line monitoring and detection of leak location for boiler tubes is possible using the developed system. Thus, the system is expected to contribute to the safe operation of power plants, and prevent economic losses due to potential leak.

• Journal of The Korean Association For Science Education
• /
• v.18 no.3
• /
• pp.261-271
• /
• 1998

This study investigated the influences of applying the Cognitive Conflict Process Model (the Procedural Teaching Model using Cognitive Conflict Strategy: Kwon, 1989) upon students' achievement and attitudes in a middle school science concept instruction. For the treatment group, science instruction to apply the Cognitive Conflict Process Model was used. For the control group, traditional instruction was used. Prior to instruction, students' pre-conceptions test and attitudes test related to the science were administered. After instruction, the above two tests and the regular examinations were measured. Also students' perceptions of their teacher's new teaching style was investigated by questionnaire. But, above all, the main purpose of this study was to investigate the principal accompanying matters of general application of the teaching model to science concept instruction rather than conceptual and attitudinal change. Therefore, this study identified necessary conditions of applying the teaching model to science instruction.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.4
• /
• pp.402-410
• /
• 2002

Recently the necessity of study on optical measuring method using laser to detect the pipeline's defect in nuclear facilities, chemical industries and power plants has been increased. Because laser light can be delivered to a remote area without any difficulties, the application of laser in many industries can solve several difficulties from the limitation of access in danger area and reduce the risks of workers. Therefore, we applied a new experimental technique to the measurement of internal defects in pressure vessels with the combination of shearography and image processing technique and detected the internal cracks of pressure vessels in the former paper. In this paper, we used the same optical system as in the former study and found the optimum shearing magnitude by comparing the real length of specimen with experimental results. A variety of conditions were applied to certify the validity of this method. Actually, several specimens which have different lengths and depths were used in this experiment under the three diverse pressure. Consequently, we have carried out this experiment to determine the limit of measurement ability with analyzing errors.

• Biomedical Science Letters
• /
• v.2 no.1
• /
• pp.49-55
• /
• 1996

The objective of this study was to develop a paper strip which could determine E. coli qualitatively and quantitatively in water, wastewater, drinks, or food. This paper strip method was a simple and rapid test method that determine E. coli by visual identification. In this study, nutrient culture media were formulated and characterized for optimum conditions. Paper strips were then prepared by impregnating into the media and dried at $60^\circ$C. The test procedure is quite simple to use. The paper strip was dipped into a sample, and excess sample was removed. The strip was then incubated at $37^\circ$C for 16 to 20 hours and the number of colonies on the strip was counted. The color of the colony spots produced by microorganisms varied depending on the media formulation. Violet-red spots were produced by E. coli. The test method was simple, rapid and no special laboratory equipment was necessary for visual identification. Therefore, this test method is applicable to on-site tests such as field tests or home tests. The paper strip method was compared with the standard agar plate method and Japanese commercial product. The method of the economical preparation of test strips was studied for production on industrial scale.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.93-99
• /
• 2013

Purpose: The aim of this study was to develop a dry eye test method using a paper based microfluidic device that improves inaccuracy caused by using one of current point-of-care dry eye tests such as Shirmer's. Methods: Wax printed hydrophilic chromatography papers were dyed with anthocyanin extracts to detect colorimetric display of liquid samples with varying pH. Fluid distribution rates were measured using artificial tears and human tears directly from 32 subjects. Results: With Shirmer's, fluid distribution rates with small amount of samples (less than $0.5{\mu}l$) were not displayed. However, with paper based microfluidic device, fluid imbibition distances over time were clearly showed. Also clinical results of dry eye from newly developed paper based microfluidic device showed correlation with the results from tear break up time tests. Conclusions: The newly developed paper based microfluidic devices were easy to use and exhibited more accurate clinical results than current dry eye point of care tests such as Shirmer's.

• Journal of the Korean School Mathematics Society
• /
• v.12 no.1
• /
• pp.71-97
• /
• 2009

The study was to develop the instruments including instructional materials and test items for enhancing spatial ability. A mixed methodology was chosen to achieve the purpose of the study. To find students' achievement, 5 units of instructional materials were developed through the qualitative method and test items were tested through the quantitative method with 152 of the 8th-graders. The strategies to develop the instructional materials were: firstly to focus on mathematics properties for developing spacial ability; secondly, to allow students to follow hierarchical procedure o[ mathematical properties from 2-d to 3-d; thirdly, to recognize what the manipulative can do and can not; and fourthly, to guide students tn develop the process oriented thought, not the result oriented thought. For the test, 25 items were analyzed to assess students' achievement using validity, difficulty, and discriminator.